Davis Instruments #6671 Owner's manual

Brand
Davis Instruments
Model
#6671
Type
Owner's manual
(
510
)
732-9229 FAX
(
510
)
670-0589 [email protected] www.davisnet.com
3465 Diablo Ave., Hayward, CA 94545-2778 USA
®
•
•
•
Angle Bracket (Product number 6671)
for EnviroMonitor Gateway or Vantage Connect
7395.353 Rev A 12/8/17
OVER
The Angle Bracket allows the EnviroMonitor Gateway or Vantage Connect
to be mounted so that sunlight on the solar panel is maximized.
Shelter mounted
without bracket.
Shelter mounted
with bracket.
The Angle Bracket is in two parts, upper and lower.
Install the bracket using the included hardware:
• Two nut plates
• Four each: ¼-20x1“ hex cap screws, ¼-20 nuts, ¼” split lock washers, ¼ at
washers
¼” Split Lock Washer
¼ Flat Washer
¼-20 Nut
Holes for
U-Bolt
Hex Cap Screws
Nut Plate
Upper Bracket
Lower Bracket
Shelter
Holes for
U-Bolt
1. Install the bracket to the Gateway or Vantage Connect as shown below.
2. Mount on a pole using the U-bolts, nuts, and washers that came with the
Gateway or Vantage Connect.
Questions? Contact Davis Technical Support:
(510) 732-7814, M- F, 7:00 am to 5:30 pm PST; or [email protected].
  • Page 1 1

Davis Instruments #6671 Owner's manual

Brand
Davis Instruments
Model
#6671
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents