Educational Insights Hot Dots® Jr. Highlights™ On-The-Go! Learn My 123s and Shapes Product Instructions

Brand
Educational Insights
Model
Hot Dots® Jr. Highlights™ On-The-Go! Learn My 123s and Shapes
Type
Product Instructions

This manual is also suitable for

EI-2362
Caring for Your Hot Dots Jr.
Light-Up Interactive Pencil
How to Install and Replace the Batteries
The Hot Dots Jr. Pencil requires 2 AAA batteries, not
included. To install the batteries, use a coin to unscrew the
battery door on the back of the pencil. Turn the coin in a
counterclockwise motion until the door opens. Install 2 fresh
AAA batteries as shown in the diagram. Replace the door.
Use the coin to tighten the door. Turn in a clockwise motion
until the door is secure.
• Do not use
rechargeable
batteries.
• Do not mix old
and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon zinc) or rechargeable (nickel-cadmium) batteries.
• Do not recharge nonrechargeable batteries.
• Remove rechargeable batteries from the toy before
recharging.
• Only charge rechargeable batteries under adult
supervision.
• Only use batteries of the same or equivalent type as
recommended.
• Insert batteries with the correct polarity.
• Remove exhausted batteries from the unit.
• Do not short circuit the supply terminals.
• To prevent corrosion and possible damage to the
product, we recommend removing the batteries from the
unit if it will not be used for more than two weeks.
Cleaning Instructions
Clean the pencil with a damp or dry cloth. Do not immerse or
spray liquid or water on the pencil.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Developed in Southern California by Educational Insights.
© Educational Insights, Gardena, CA (U.S.A.). All rights reserved.
Learning Resources Ltd., Bergen Way, King’s Lynn, Norfolk,
PE30 2JG, UK. Please retain this information. Made in China.
www.educationalinsights.com
Hecho en China. Conserva el envase para futuras consultas.
Fabriqué en Chine. Veuillez conserver l’emballage.
Hergestellt in China. Bitte Verpackung gut aufbewahren.
Tell us what you THINK!
REVIEW
this product at
educationalinsights.com
Troubleshooting
If the Hot Dots Jr. Pencil does not work the first time you
use it:
• Make sure you have installed 2 AAA batteries in the
proper orientation.
If the Hot Dots Jr. Pencil does not work after using it
successfully:
• Take out the batteries and reinsert them, making sure that
they are sitting properly inside the battery compartment.
• Install fresh batteries.
• Make sure the battery door is tightly secured.
If the Hot Dots Jr. Pencil still does not work:
• Make sure the tip of
the Hot Dots Jr. Pencil
is held straight up and
down and is touching
the center of the
answer dot.
How to Position the Hot
Dots
®
Jr. Interactive
Light-Up Pencil
Make sure the tip of the Hot Dots Jr. Pencil sits flat on the
surface of the answer dot as shown above. The Hot Dots
®
Jr. Light-Up Interactive Pencil glows green for answer
reinforcement.
Using the Hot Dots Jr. Pencil
1. Read a question.
2. Position the pencil straight up and down and touch an
answer dot by pressing the end of the pencil on the
center of the dot.
• If correct, the pencil glows green.
• If incorrect, the pencil remains unlit.
  • Page 1 1
  • Page 2 2

Educational Insights Hot Dots® Jr. Highlights™ On-The-Go! Learn My 123s and Shapes Product Instructions

Brand
Educational Insights
Model
Hot Dots® Jr. Highlights™ On-The-Go! Learn My 123s and Shapes
Type
Product Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents