Electro-Voice XLC-BGK Operating instructions

Type
Operating instructions
XLC-BGK Bottom Grid Kit
The X-Line Compact Bottom Grid Kit consists of the same rigging attachment parts as those integrated into the top of an
XLC Loudspeaker. When used at the bottom of an XLC Loudspeaker Array along with an additional XLC-Grid (sold
separately), the XLC-BGK allows for a column of X-Line Compact Loudspeakers to have a secondary rigging or
anchoring point while being safely pulled back to desired angles.
When using the Bottom Grid Kit never exceed the rigging rating of the XLC loudspeaker systems used
with it. These ratings account for stresses resulting from the load angles encountered in curved arrays.
These ratings are the limiting factors. Consult the XLC Rigging manual, and/or the rigging label on the
XLC loudspeaker systems for the ratings when used in curved arrays.
X-Line Compact
XLC-BGK Bottom Grid Kit
User Instructions
Figure 1: Attaching Bottom Grid
Kit to Loudspeaker at Bottom of
Array, along with a Secondary
Grid
XLC Loudspeaker at
Bottom of Array
(Loudspeaker Sold
Separately)
Shoulder Bolt for Locking
Button Bar into Bottom
Loudspeaker
(2 Included in Kit)
Rear XLC Swing Arm
(2 Included in Kit)
Front XLC Button Bar
(2 Included in Kit)
Quick-Release Pin
(2 Included in Kit)
XLC Grid
Installed Under Bottom
Enclosure
(Grid Sold Separately)
tsiLstraP)100-820203(KGB-CLX
metIytitnauQrebmuNtraPnoitpircseD
12 000-671065yssabuSraBnottuB
22 000-476005mrAgniwSr
aeR
32 000-443065niPesaeleR-kciuQ
42 000-140185tloBredluohS
1
1
2
3
3
4
2
4
U.S.A. and Canada only. For customer orders,
contact the Customer Service department at
800/392-3497 Fax: 800/955-6831
Europe, Africa and Middle East only. For customer orders,
contact the Customer Service department at
49 9421-706 0 Fax: 49 9421-706 265
For warranty information, contact the Service Repair department at:
616/695-6831 or 800/685-2606
For technical assistance, contact Technical Support at:
866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 1/2006
Part Number 38110-522 Rev A
Figure 2: Sample XLC Line
Array using the XLC-BGK
Bottom Grid Kit
XLC Loudspeakers
(Loudspeaker Sold
Separately)
Rear Swing Arms
(2 Included in Kit)
Front Button Bars
(2 Included in Kit)
XLC Grid
Installed Under
Bottom Enclosure
(Grid Sold Separately)
XLC Grid Installed
Above Top Enclosure
(Grid Sold Separately)
Hoist Motor Attachment
for Main Suspension
Hoist Motor Attachment
for Pull-Back and
Secondary Rigging
See Detail
View
DO NOT USE THE LAST HOLE IN THE
SIDEARM OF THE BOTTOM GRID TO
ATTACH THE SPREADER BAR. ALL OTHER
HOLES ARE ACCEPTABLE.
  • Page 1 1
  • Page 2 2

Electro-Voice XLC-BGK Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI