DeWalt DXVA19-4101 User manual

Type
User manual

This manual is also suitable for

Instructions for how to install filter bag to your DeWALT vacuum
1. Unlatch the powerhead, and detached the powerhead from the tank.
2. Remove the filter bag from the packaging, unfold the filter bag.
3. Connect the port on the filter bag to the deflector inside the tank,
make sure the filter bag is gently push all the way in.
4. Put the powerhead onto the tank, close the latches. The vacuum is
ready for use.
*This filter bag is intended for dry pick up only.
If you have questions or comments, please contact us.
Call us at 1-888-899-0146
Or
Visit us www.altonindustries.com
  • Page 1 1

DeWalt DXVA19-4101 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI