![](//vs1.manuzoid.com/store/data-gzf/ba79962c3621b0c81e06da8bfd6e2c9a/2/000941843.htmlex.zip/bg1.jpg)
Suggested Shutter Installation Instructions
1. Parts included with your order:
• 2 shutters
• 10 fasteners (5 for each shutter)
• 10 wall anchors (5 for each shutter)
2. Gather required tools:
• Pencil or pen
• Tape measure
• Hammer
• Drill
• Phillips bit
• 1/16” bit and 1/4" bit
3. Read all instructions before proceeding. Then determine location of shutters on wall, spacing as desired.
4. Hold one shutter at a time in the desired location, and use 1/16” bit to pre-drill 5 holes through each
shutter AND into the wall. Optimal hole locations may vary depending on your specific project.