Binary B-500-EXT-230-RS User guide

Binary
Brand
Binary
Model
B-500-EXT-230-RS
Type
User guide

This manual is also suitable for

© 2012 Binary Rev: 130506-1722
Application Guide
B-500-EXT-230-RS / B-500-EXT-330-RS-IP Extender IR Integration
+24V DC 1A
INPUT
PWR
HDMI OUT
RS-232 LINK
ON
SER VICE
5 3 2
HDBaseT
DTE
DCE
1 2
ON
+24V DC 1A
INPUT
PWR
Control In
HDMI IN
RS-232 LINK
DTE
DCE
ON
SER VICE
5 3 2
HDBaseT
1 2
ON
IR InputsIR Outputs
IR Processor / Controller
A
C
C
B
B-500-EXT
Transmitter
B-500-EXT
Receiver
PLAY
C
or
Transmitter - IR Control In (3.5mm {1/8”} Mono)
A
IR Signal (Tip)
GND (Sleeve)
IR Signal Tip
GND (Gro und) Ring
This connection does not include power for an IR Receiver. If the system
requires a powered IR Receiver at the Transmitter, a powered IR Block (ex:
SnapAV KIT-IR-RPTR-1X4) will be needed between the IR Receiver and the
Transmitters IR Control In.
IR Flasher Out (3.5mm {1/8”} Mono)
C
IR Signal (Tip)
GND (Sleeve)
IR Signal Tip
GND (Gro und) Ring
Receiver - IR Receiver In (3.5mm {1/8”} Stereo)
B
This 3.5mm {1/8”} Stereo connection includes +9V DC power for an IR
Receiver. DO NOT connect a mono cable to this connection as damage may
occur. If the system requires connection to an Automation System, or Connecting
Block, the included IR Adapter Cable must be used between the Automation
System or Connecting Block output, and the IR Receiver input .
IR Signal (Tip)
GND (Ring)
9V DC (Sleeve)
IR Signal (Tip)
GND (Sleeve)
To IR Receiver In
To IR Control System
or Connecting Block
IR Signal (Tip)
GND (Ring)
9V DC (Sleeve)
IR Signal Tip
GND (Ground) Ring
+9V DC Sleeve
HDTV
  • Page 1 1

Binary B-500-EXT-230-RS User guide

Binary
Brand
Binary
Model
B-500-EXT-230-RS
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents