2. DCS
  3. IVSUR26

DCS IVSUR26 IVSUR Utensil Rail Install

  • Hello! I am an AI chatbot trained to assist you with the DCS IVSUR26 IVSUR Utensil Rail Install. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
5900 Skylab Road, Huntington Beach, CA 92647
Tel: 714.372.7000 • Fax: 714.372.7001
Customer Care: 888.281.5698
www.dcsappliances.com
P/N 17606 Rev. A 12/04
UTENSIL RAIL - IVSUR26
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS:
1. Remove 4 screws (2 of both sides, left and right) from hood by hand ( Fig. 01). Do not scratch panel.
2. Drive 4 utensil rail caps supplied with kit into nut inserts on the hood (2 of both sides, left and right)
(Fig. 02).
3. Insert utensil rail into caps on hood and tighten with Allen wrench provided (Fig. 03).
Fig. 02
Fig. 01
Fig. 03
Screw
Utensil Rail Cap
Fig. 04
/