Panasonic Viera TH-37PX7H Owner's manual
- Category
- LCD TVs
- Type
- Owner's manual
TV
PROGRAMME
GUIDE
INPUT
RETURN
EXIT
MENU
OK
ASPECT
OPTION
DIRECT TV REC
VCR
132
465
798
0
REC
VCR DVD
TEXT STTL INDEX HOLD
Operating Instructions
Plasma Television
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)
This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative
effects
on
human
health
and
the
environment
which
could
otherwise
arise
from
inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of
disposal.
Printed in Czech Republic
Model No. TH-37PX7E
TH-42PX7E
TH-50PX7E
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic-europe.com
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identifi cation in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Licence
Trademark Credits
•
DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).
•
HDMI, the HDMI Logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
•
HDAVI Control
TM
is a trademark of Matsushita Electric Industrial Co., Ltd.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TH-37PX7E Declaration of Conformity No 4506, 16 January 2007
TH-42PX7E Declaration of Conformity No 4504, 16 January 2007
TH-50PX7E Declaration of Conformity No 4502, 16 January 2007
2
3
Viewing Advanced FAQs, etc.Quick Start Guide
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
media excitement
Enjoy rich multi-media
Amplifi er with
Speaker system
VCR
DVD player
DVD Recorder
Contents
•
Safety Precautions ······································ 4
(Warning / Caution)
•
Notes ··························································· 5
•
Maintenance ··············································· 5
Be Sure to Read
Advanced Features
•
How to Use Menu Functions ····················· 20
(picture, sound quality, etc.)
•
DVB Settings (DVB) ·································· 24
(pay-TV, software update, time adjustment)
•
Editing Channels ······································· 26
•
Tuning Channels ······································· 28
•
Restore Settings ······································ 31
•
Input Labels ·············································· 32
•
Q-Link Functions ······································· 34
•
HDMI Functions ······································· 35
(HDMI terminal / VIERA Link)
•
External Equipment ··································· 38
Basic Features
•
Watching TV ·············································· 14
•
Watching Videos and DVDs ······················ 16
•
Viewing Teletext ········································ 18
Enjoy your TV!
•
Technical Information ································ 40
•
FAQs ························································· 42
•
Specifi cations ············································ 43
•
Licence ······················································ 44
FAQs, etc.
Accessories / Options
·········· 6
Attaching the pedestal
········· 7
Identifying Controls
··············· 9
Basic Connection
················· 10
Auto Setup
······························· 12
Quick Start Guide
Notice for DVB functions
•
Any functions related to DVB (Digital Video Broadcasting) will work in areas where
DVB-T (MPEG2) digital terrestrial broadcasting are received. Consult your local
Panasonic dealer with coverage areas.
•
DVB functions may not be available in some countries.
•
This TV has the capability for DVB specifi cations. But future DVB services cannot be
guaranteed.
Camcorder
Set top box
4 5
Safety Precautions
If you fi nd any
abnormality,
remove the mains plug
immediately!
Do not remove covers
NEVER modify the TV yourself
Keep liquids away from the TV
To prevent damage which may result in fi re or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (fl ower vase,
cups, cosmetics, etc.) above the TV. (including on
shelves above, etc.)
(High-voltage components may cause serious
electrical shock.)
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
AC 220-240 V
50 / 60 Hz
(Cleaning an energized TV may cause electrical shock.)
When cleaning the TV, remove the
mains plug
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fi re never place any
type of candle or naked fl ame on top or near the TV.
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fi re.)
Ensure that the mains plug is easily accessible.
Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective
earthing connection.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not use any mains lead other than that provided with this TV. (This may cause fi re or electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fi re or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
Warning Caution
Blocked ventilation by curtains,
etc. may cause overheating, fi re
or electrical shock.
Do not block the rear air vents
Notes
Maintenance
Display panel
Cabinet
Mains plug
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
•
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fi ngernail or other hard object.
•
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Caution
•
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
•
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
When TV will not be used for a
long time, remove the mains plug
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live socket outlet.
Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the TV away from these equipment
Do not place foreign objects
inside the TV
Do not let metal or fl ammable objects drop into the
TV through the air vents (fi re or electrical shock
may result).
Use only the dedicated stands
/ mounting equipment
Do not place the TV on sloped
or unstable surfaces
The TV may fall off or tip over.
Using an unauthorized stand or other fi xtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
If no signal is received and no operation is
performed in Analogue TV mode for 30 minutes, the
TV will automatically go to standby mode.
Auto power standby function
Transporting the TV with its display panel
facing upright or downward may cause
damage to the internal circuitry.
Transport only in upright position
Do not display a still picture for a long time
This causes the image to remain on the plasma
screen (“image retention”).
This is not considered a malfunction and is not
covered by the warranty.
To prevent image retention, contrast is lowered
automatically after a few minutes if no signals are
sent or no operations are performed. (p. 42)
Typical still images
Channel number and other logos
Image displayed in 4:3 mode
Video game
Allow suffi cient space around the
TV for radiated heat
Minimum distance
10
10
10
7
(cm)
6
7
Quick Start Guide
TV
OK
132
465
798
0
+
-
-
+
B
D
A
D
C
C
D
Accessories / Options
Installing remote’s batteries
Batteries for the Remote
Control Transmitter
(2)
•
R6 (UM3)
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Remote Control
Transmitter
•
EUR7651110
Standard accessories
Check that you have the accessories and items shown
Operating Instructions
Pan European Guarantee Card
Clamper (2)
Using the clamper
•
Do not bundle the RF cable
and mains lead together (could
cause distorted image).
•
Fix cables with clampers as
necessary.
•
When using the optional
accessory, follow the option’s
assembly manual to fi x cables.
Rear of the TV
snaps
To remove from the TV:
To loosen:
Keep pushing
both side snaps
Set the tip
in the hooks
Insert the clamper
in a hole
hole
1. Attach the clamper
2. Bundle the cables
Keep pushing
the knob
knob
hooks
Caution
•
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
•
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take
steps to prevent the TV from tipping over.
•
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Mains Lead
Optional accessories
Wall-hanging bracket
(vertical)
TY-WK42PV3W
(angle)
TY-WK42PR2W
TY-WK42PR3W
Pedestal (ST-42H2-WK / ST-50H2-WK)
•
TBLX0024
(TH-37PX7E, TH-42PX7E)
•
TBLX0025
(TH-50PX7E)
For installation p. 7 and p. 8
•
Attaching the pedestal
•
Accessories / Options
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
■
Securing the TV
Label
View from the bottom
Arrow mark
Hole for pedestal
installation
■
Assembling the pedestal
Insert the poles into the left and right holes in the
underside of the base so that they fi t securely as
shown in the illustration above.
Installing the poles Securing the poles
Front
Use the assembly screws
A
to secure the poles
fi rmly to the bottom of the base.
•
Forcing the assembly screws the wrong way will
strip the threads.
Caution
Do not use any other TV and displays.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
•
If suffi cient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Use the accessory fall-prevention brackets to secure the TV.
•
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV.
•
If two or more people are not present, the TV may be dropped, and personal injury may result.
Warning
Attaching the pedestal
Assembly screw (4)
M5 × 20
Assembly screw (4)
M5 × 30
Pole (2) Base
For TH-42PX7E,
TH-50PX7E
(Outside)
For TH-37PX7E
(Inside)
Carry out work on a horizontal and
level surface.
Use the assembly screws to
fasten securely.
8
9
Quick Start Guide
TV
PROGRAMME
GUIDE
INPUT
RETURN
EXIT
MENU
OK
ASPECT
OPTION
DIRECT TV REC
VCR
132
465
798
0
REC
VCR DVD
TEXT STTL INDEX HOLD
Cursor buttons to make selections and
adjustments
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes aspect ratio (p. 15)
Selects programmes in sequence
Teletext (p. 18)
OK button to confi rm selections and choices
Press after selecting programme positions to
quickly change programme.
VCR / DVD operations (p. 17)
Volume
Programme Information (p. 15)
Teletext Index (p. 19)
Coloured buttons used for the
selection, navigation and operation of
various functions
EXIT
(Returns to TV screen)
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 34)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 14 and p. 18)
When in Standby mode, switches TV On.
Access VIERA Link Menu (p. 37)
Programme Guide (p. 14)
Option menu
Sets the preferred settings of viewing
and sound options easily
(p. 15)
Subtitles
Showing subtitles
(p. 15)
Changes the input mode
TV -
switches DVB (digital broadcasting)
/ Analogue mode
(p. 14)
AV - changes AV input mode (p. 16)
Returns to the previous menu
Still picture (p. 15)
Teletext Hold (p. 19)
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus (p. 20)
The TV must be fastened to both a base and a wall.
Remove the screws at both top corners on the rear of the
TV, and attach the clamps to the TV using the removed
screws.
Band (2) Screw (2)
Nominal diameter 4 mm × 12
Wood screw (2) Clamp (2)
Attaching the pedestal
■
Securing to a base
Fix pedestal and base together with band.
■
Securing to a wall
Fix to wall or post with strong commercial wire or chain.
Remove Attach
Identifying Controls
Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
Remote control
signal receiver
Changes the input mode
Function select
•
Volume / Contrast / Brightness / Colour
/ Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 29)
DVB LED
•
DVB system active during Direct TV Recording
(Standby) :orange
Power LED
•
Standby: red
On: green
Mains power On / Off switch
•
Identifying Controls
•
Attaching the pedestal
10
11
Quick Start Guide
L
R
Y
P
B
P
R
PC
AUDIO OUT
V
I
D
E
O
A
U
D
I
O
C
O
M
P
O
N
E
N
T
L
R
RF IN
RF OUT
RF OUT
RF IN
RF OUT
RF IN
RF IN
•
Basic Connection
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet fi rst.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
TV only TV, DVD Recorder or VCR
Note
•
Connect to AV1 / 2 for a DVD Recorder / VCR supporting Q-Link (p. 34).
Example 3
Connecting DVD Recorder / VCR and Set top box
TV, DVD Recorder / VCR and Set top box
DVD Recorder
or VCR
SCART cable
(fully wired)
RF cable
Aerial
Mains lead (supplied)
Rear of the TV
Set top box
AC 220-240 V
50 / 60 Hz
RF cable
RF cable
SCART cable
(fully wired)
SCART cable
(fully wired)
RF cable
Clamper
•
To unfasten
Mains lead (supplied)
Mains lead (supplied)
SCART cable
(fully wired)
DVD Recorder or VCR
RF
cable
Aerial AerialRear of the TV Rear of the TV
RF cable
RF cable
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
12
13
Quick Start Guide
Select
EXIT
Change
RETURN
Mode Music
Bass
Treble
Balance
Surround Off
Volume Correction
MPX Stereo
Sound Menu
Reset to Default Set
Auto Setup - Digital and Analogue
EXIT
This will take about 3 mins.
RETURN
Analogue Scan 2 78 1 41
Digital Scan 5 69
62
Channel Service Name Type Quality
CBBC Channel DVB 10
62 BBC Radio Wales DVB 10
62
BBC Radio Cymru
DVB 10
62
E4
DVB 10
62
Cartoon Nwk
DVB 10
CH 29
Analogue
-
CH 33
BBC1
Analogue
-
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
Country
Portugal
Spain
Italy
France
Austria
Germany
Netherlands
Hungary
Czech
E.Eu
Poland
Switzerland
Belgium
Finland
Norway
Sweden
Denmark
Greece
Menüsprache
Slovenčina
čeština
Еλληνικά
Italiano
Français
English
Srpski
Deutsch
Português
Türkçe
Suomi
Polski
Românǎ
Hrvatski
Nederlands
Slovenščina
Български
Magyar
Svenska
Dansk
Norsk
Español
Viewing Mode
Dynamic Normal Cinema
GUIDE
INPUT
ASPECT
OPTION
DIRECT TV REC
PROGRAMME
REC
VCR DVD
TEXT STTL INDEX HOLD
VCR
132
465
798
0
TV
RETURN
EXIT
MENU
OK
MENU
EXIT
RETURN
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
(example: Sound Menu)
On-screen operation
guide will help you.
Auto Setup
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Auto Setup is now complete and your TV is ready for viewing.
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
•
To edit channels
Editing Channels (p. 26)
Analogue Programme Edit (p. 29)
■
ON SCREEN HELP Instructions box
Open the main menu
Return to the previous menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
Many features available on this TV can be accessed via the On Screen Display
menu.
Note
•
If tuning has failed “Auto Setup”
(
p. 29).
•
If downloading has failed “Download”
(
p. 23).
•
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
■
How to use remote control
•
Auto Setup
Using the
On Screen
Displays
Exit the menu system and return to the normal viewing screen
4
Start Auto Setup
•
If a compatible recording equipment
with Q-Link or similar technologies
(p. 34) is connected, analogue
channel information is automatically
downloaded to the equipment.
•
Auto Setup will start to search for
TV channels and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
3
Select your country
2
Select the language
•
Also possible to change the setting
in Picture Menu (p. 22)
5
Select the picture setting
select
store
select
select
set
14
15
Viewing
1 BBS
23:35
Corontation Street
20 : 00 ~ 20 : 55
Now
For info press
Change category
Profile 1
Cartoon Nwk
All DVB Services
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
BBCi
CBBC Channel
6
7
8
1
2
3
4
Select
Connect
EXIT
Page up/down
RETURN
DIRECT TV REC
PROGRAMME
REC
TEXT INDEX
VCR DVD
RETURN
MENU
TV
INPUT
EXIT
OK
OPTION
VCR
132
465
798
0
STTL HOLD
ASPECT
GUIDE
VCR
132
465
798
0
•
To select the two or three-digit programme number, e.g. 39
Watching TV
up
down
or
•
Watching TV
HOLD
Freeze / unfreeze picture
Hold
9
(in a short time)
3
■
Other useful functions (Operate after )
Change
aspect
ratio
Select
Change
EXIT
RETURN
Aspect selection
16:9
Just
14:9
4:3 Full
4:3
Zoom1
Zoom2
Zoom3
Auto
A
SPECT
Change the aspect ratio (p. 40)
Enjoy viewing the picture at its optimum size and aspect.
Aspect Selection list
•
To change the mode
•
To change the mode using the ASPECT button only
A
SPECT
(Press repeatedly until you reach the desired mode)
Display Aspect
Selection list
A
SPECT
During the list is displayed,
select the mode
Store
Select a channel
3
2
Select DVB (Digital Video Broadcasting) or Analogue
Information banner
Mains power On / Off switch should be On.
(Press for about 1 second)
1
•
You can also select the mode using the TV button on the front panel
of the TV.
Display
subtitles
STTL
Display / hide subtitles (if available)
•
To change the language for DVB
“Preferred Subtitles” (p. 23) (If available)
Turn power on
Note
•
To watch pay-TV
(p. 25)
•
To select from the Programme Guide
GUIDE
Display the
current
programme
status
OPTION
Check or change the current
programme status instantly
•
To change
Subtitle Language (DVB mode)
Possible if the programme has some languages of subtitles
Multi Audio (DVB mode)
Possible if the programme has some languages of sounds
Teletext Language
Setup Menu (p. 23)
MPX (Analogue mode)
Sound Menu (p. 22)
Volume Correction
Adjusts volume of individual channel or input mode
Note
•
Also possible to change the settings in Menu list (p. 22 and p. 23).
Volume
select programme
watch
select page
select
change
Display
information
banner
1 BBS
23:35
Corontation Street
Bad Signal Encrypted
45
20 : 00 ~ 20 : 55
Now
For info press
Change category
Profile 1
Display programme information
Sound
mute
•
To set display timeout
“Banner Display Timeout” (p. 23)
•
To hide
EXIT
•
Appears also when changing channel.
•
Information of another channel
•
Information on next programme
(DVB)
•
To watch the programme listed in the banner
•
Information banner operation
1st press
Display banner
2nd press
Banner + programme synopsis
(DVB)
3rd press
Exit
Weak TV signal
Scrambled
broadcasting
Subtitle
Teletext
Stereo sound / multiple audio
Off timer
Features available
Programme
DVB: Programme
Start / Finish time
Analogue: Programme
Status
Channel Current time Category
To change the category
blue
16
17
Viewing
TEXT STTL INDEX HOLD
ASPECT
OPTION
DIRECT TV REC
GUIDE
RETURN
EXIT
MENU
TV
PROGRAMME
INPUT
OK
VCR
132
465
798
0
REC
VCR DVD
•
Watching Videos and DVDs
Watching Videos and DVDs
3
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment (p. 10 and p. 11)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Select the input mode connected to the equipment
Note
•
If the external equipment has an aspect adjustment function, set to “16:9”.
•
For details, see the manual of the equipment or ask your local dealer.
■
To return to TV
Displays the selected mode
1
Turn the TV on
■
When connecting with SCART as example 2 or 3 (p. 10 and p. 11)
Receives input signals automatically when playback starts
•
Input signals are automatically identifi ed by the SCART (pin 8)
terminal.
•
This function is also available for HDMI connections (p. 37).
■
If input mode is not switched automatically
Perform and
•
You can also select the input using the AV button on the remote
control or the front panel of the TV.
Press the button repeatedly until the desired input is selected.
•
You can label or skip each input modes “Input Labels” (p. 32)
•
Dependant on the setup of the equipment
4
View
Input Selection
AV1
AV2/AV2S
COMPONENT
HDMI
TV
2
Display the Input select menu
VCR DVD
VCR / DVD switch
∗
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
PROGRAMME
Programme Up / Down
Select programme
REC
Record
Start recording
Panasonic equipment connected to the TV can be directly operated with the remote control.
Note
•
Confi rm correct operation after the code changed.
•
The codes will be reset to default values if batteries are replaced.
•
“DVD” means DVD player, DVD recorders and Recorder home theatre.
•
Some operations may not be possible on some equipment models.
∗
Setting your remote control to operate Panasonic VCR, DVD, etc.
Select the VCR / DVD switch to the appropriate position
Press and hold during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
Press
“VCR” position
Equipment Code
VCR 10 (default)
DVD 11
“DVD” position
Equipment Code
DVD 70 (default)
Player home theatre
71
VCR DVD
select
watch
VCR
132
465
798
0
18
19
Viewing
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
17:51 28 Feb
PROGRAMME
REC
VCR DVD
ASPECT
OPTION
DIRECT TV REC
GUIDE
RETURN
EXIT
INPUT
MENU
OK
VCR
TEXT STTL INDEX HOLD
132
465
798
0
red
green
yellow
blue
VCR
132
465
798
0
TEXT
Viewing Teletext
Switch to Teletext
1
Select the page
or
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
or
■
To return to TV
TEXT
(Corresponds to the colour bar)
•
Displays Index
(content varies
depending on the
broadcasters)
•
Viewing Teletext
Time / date
Current
page
number
Sub page number
Colour bar
What is FLOF (FASTEXT) mode?
In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 19)
■
To change mode “Teletext” in Setup Menu (p. 23)
■
To adjust contrast
MENU
As the blue bar is displayed
Reveal
hidden
data
MENU
red
•
Re-hide
red
Reveal hidden words e.g. quiz page answers
■
Using teletext conveniently
FULL /
TOP /
BOTTOM
MENU
green
Normal (FULL)(BOTTOM)
(Expand the BOTTOM half)
INDEX
INDEX
Return to the main index page
HOLD
HOLD
If you wish to hold the current page without updating
Stop or resume automatic updating
■
To resume
HOLD
View sub
page
0 0 0
6
•
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
Enter the
4-digit number
example: P6
Appears at upper-left
corner of the screen
■
To view specifi c sub page
MENU
blue
View sub page (Only when teletext is more than one page)
Watch
TV while
waiting
for update
P108
MENU
yellow yellow
Appears
when
updating is
completed
(You cannot change the channel.)
Teletext automatically updates itself when new information becomes available.
•
The news page provides a function that indicates arrival of latest news (“News Flash”).
Changes to TV screen temporarily
View the
updated
page
View the TV picture while searching for a teletext page
2
What is TOP mode? (in case of TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in an easier search and effective guide.
•
Fast overview of the teletext information available
•
Easy to use step-by-step selection of the topical subject
•
Page status information at the bottom of the screen
Available page up / down
red
green
To select among subject blocks
blue
To select next subject within the subject block
(After the last subject, it moves to the next subject block.)
yellow
(TOP)
(Expand the TOP half)
Call up a
favourite
pages
STTL
•
Call up the page stored in “blue”.
•
Factory setting is “P103”.
(Analogue mode only)
View in
multi
window
MENU
Watch TV and Teletext in two windows at once
•
Operations can be made only in Teletext screen.
(Press twice)
•
Select Picture and text
On or Off
Store
frequently
viewed
pages
Store frequently viewed pages
in the colour bar
(List mode only)
As page is
displayed
The number changes to white.
Corresponding
colour button
■
To change stored pages
VCR
132
465
798
0
Enter new page number
Colour button you
want to change
press
and
hold
press
and
hold
up
down
Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
Picture Menu 1/2
Viewing Mode Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Warm
Colour Management Off
P-NR Off
1/2
Viewing Mode Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Warm
Colour Management Off
P-NR Off
Picture Menu
Colour Balance Normal
Sharpness
Tuning Menu Access
REC
VCR DVD
TEXT STTL INDEX HOLD
VCR
132
465
798
0
ASPECT
OPTION
DIRECT TV REC
GUIDE
INPUT
PROGRAMME
TV
RETURN
EXIT
MENU
OK
MENU
20
21
Q-Link Settings
Q-Link AV2
AV2 out DVB
Download Access
(p. 23)
Off
Tuning Menu
Auto Setup Access
Analogue Programme Edit
Access
DVB Manual Tuning
Analogue Manual Tuning
Access
Add New DVB Services Access
Access
New Service Message
DVB Signal Condition Access
On
(p. 28)
How to Use Menu Functions
•
How to Use Menu Functions
(picture, sound quality, etc.)
Display the menu
3
2
4
Various menus allow you to make settings for the picture, sound, and other functions.
•
Displays the functions that can be set
(varies according to the input signal)
Note
•
To initialize all settings
“Shipping Condition”
(p. 31)
■
To return to TV
at any time
EXIT
■
To return to the
previous screen
RETURN
Select the menu
Select the item
(example: Picture Menu)
Adjust or select
(example: Picture Menu)
(example: Picture Menu)
Changed
Number and positions
of alternatives
Moved
■
Choose from among alternatives
■
Adjust using the slide bar
1
Displays the next screen
■
Go to the next screen
■
To change menu pages
up
down
■
Overview
VIERA Link Control
Speaker Selection
VIERA Link Menu
Home Cinema
Recorder
(p. 37)
Main Menu
VIERA Link
Picture
Sound
Setup
The menu of the accessed
equipment
1/2
Viewing Mode Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Warm
Colour Management Off
P-NR Off
Picture Menu
2/2
3D-COMB Off
Reset to Default Set
MPEG NR Off
Picture Menu
(p. 22)
2/2
Reset to Default Set
Sound Menu
Mode Music
Bass
Treble
Balance
Surround
Volume Correction
Off
Preferred Multi Audio
Sound Menu
HDMI Input
Stereo
Auto
MPX
English
1/2
(p. 22)
•
Only available items can be selected.
1/3
AV Colour System
Auto
Q-Link Settings Access
Child Lock Access
Tuning Menu
Off Timer Off
Language
Teletext TOP
Access
Access
Setup Menu
DVB Profile Edit Access
DVB Service List
Access
2/3
Shipping Condition Access
3 seconds
Input Labels
VIERA Link
Time Zone
On
Access
Setup Menu
Banner Display Timeout
Auto
Common Interface Access
System Update Access
Power Save Off
Side Panel Off
(p. 23)
3/3
Refresh Rate
System Information Access
Software License Access
Setup Menu
100Hz
access
select
change
store or access
(Required by some
functions)
select
Advanced
Menu
Item Adjustments / Confi gurations (alternatives)
VIERA Link
VIERA Link Control
Controls the connected Panasonic equipment
“Easy control only with VIERA remote control” (p. 37)
“Speaker control” (p. 37)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
Speaker Selection
Picture
Viewing Mode
Basic picture mode (Dynamic / Normal / Cinema)
•
Set for each input signal
Contrast, Brightness,
Colour, Sharpness
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Tint
Adjusts tint of image
•
For NTSC signal reception only
Colour Balance
Chooses the colour balance of the entire image (Cool / Normal / Warm)
Colour Management
Automatically adjusts colours to vivid ones (Off / On)
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
•
Not valid on HDMI or DVB
MPEG NR
Automatically reduces noise for watching DTV, DVD and VCD (Off / Min / Mid / Max)
3D-COMB
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, components and HDMI
Reset to Default
Press the OK button to reset the present Picture Mode to the default settings
Sound
Mode
Basic sound mode (Music / Speech)
Bass
Adjusts the output level of deep bass
Treble
Adjusts the output level of high-pitch, shrill sound
Balance
Adjusts volume level of right and left speakers
Surround
Surround sound settings (Off / On)
Provides a dynamic enhancer to simulate improved spatial effects
Volume Correction
Adjusts volume of individual channel or input mode
Preferred Multi Audio
Selects the preferred language for DVB multi audio (depending on the broadcaster)
MPX
Select stereo / monaural (Mono / Stereo)
•
Normally: Stereo
•
Stereo signal cannot be received: Mono
•
M1 / M2: Available while mono signal is transmitted
•
Analogue mode only
HDMI Input
Select to fi t the input signal (Auto / Digital / Analogue) (p. 35)
Auto : Automatic detection of digital or analogue sound source
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
Reset to Default
Press the OK button to reset the present Sound Mode to the default settings
Menu
Item Adjustments / Confi gurations (alternatives)
Setup
AV Colour System
Selects optional colour system based on video signals in AV mode
(Auto / PAL / SECAM / M.NTSC / NTSC)
DVB Profi le Edit
Creates list of favourite programmes (p. 27)
DVB Service List
Skips the unwanted DVB channels (p. 27)
Q-Link Settings
Q-Link
Selects which AV terminal is to be used for data communication between this TV and a
compatible recording equipment (AV1 / AV2) (p. 34)
AV1 / AV2 out
Chooses the signal to be transmitted from the TV to Q-Link
(Analogue / DVB / AV1 / AV2 / Monitor)
•
Monitor: Image displayed on screen
•
Component and HDMI signals cannot be outputted
Download
Downloads analogue channel information to a Q-Link compatible equipment connected
to the TV
Child Lock
Locks a programme channel to prevent access to it (p. 27)
Tuning Menu
Auto Setup
Automatically sets the channels received in the area (p. 29)
Analogue
Programme Edit
Edits analogue channels (p. 29)
DVB Manual
Tuning
Sets the DVB channels manually (p. 30)
Analogue
Manual Tuning
Sets the analogue channels manually (p. 30)
Add New DVB
Services
Adds new DVB services (p. 30)
New Service
Message
Selects whether to give a notifi cation message when a new DVB service is found
(p. 30)
DVB Signal
Condition
Checks the DVB signal condition (p. 30)
Off Timer
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Language
OSD Language
Changes language for on-screen displays
Teletext
Language
Selects teletext language (West / East1 / East2)
•
West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
•
East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
•
East2: Czech, Hungarian, Lettish, Polish, Rumanian
Preferred Subtitles
Selects the preferred language for DVB subtitles (depending on the broadcaster)
•
To display subtitles p. 15
Teletext
Teletext display mode (TOP (FLOF) / List) (p. 18)
Shipping Condition
Resets all settings, for example, when moving house (p. 31)
Common Interface
Uses to watch pay-TV (p. 25)
System Update
Downloads new software to TV (p. 25)
Power Save
Reduces brightness of picture to economise on power consumption (Off / On)
Side Panel
Increases the brightness of the side panel (Off / Low / Mid / High)
•
The recommended setting is “High” to prevent panel “image retention”
Input Labels
Labels or skips each input terminals (p. 32)
Banner Display
Timeout
Sets how long the information banner (p. 15) stays on screen
•
0 (No display) to 10 sec. in 1-sec. increments
VIERA Link
Sets to use VIERA Link functions (Off / On) (p. 36)
Time Zone
Adjusts the time data (p. 25)
Refresh Rate
Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
•
Set to “100Hz” normally
Software License
Displays the software licence information
System Information
Displays the system information of this TV
22
23
■
Menu list
•
How to Use Menu Functions
(picture, sound quality, etc.)
How to Use Menu Functions
■
Menu list
•
Only available items can be selected.
Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
Off
Power Save
Side Panel Off
Off
2/3
Common Interface Access
System Update Access
Input Labels
Banner Display Timeout
3 seconds
VIERA Link
On
Setup Menu
Time Zone
Auto
Power Save Off
Side Panel Off
RETURN
GUIDE
123
456
789
0
VCR
REC
VCR DVD
PROGRAMME
TEXT STTL INDEX HOLD
ASPECT
OPTION
DIRECT TV REC
TV
EXIT
MENU
OK
INPUT
MENU
24
25
DVB Settings
Select “Setup”
Select “Common Interface”, “System Update”
or “Time Zone”
Set
■
To return to TV
EXIT
(DVB mode)
DVB Settings provide access to various advanced features.
•
DVB Settings (DVB)
(pay-TV, software update, time adjustment)
System
Update
Update
TV's
software
system
■
To update immediately
System Update
Auto Update Search in Standby
System Update Search Now
On
Select “Auto Update Search in Standby” and then set “On” or “Off”
•
On: Automatically performs
a search in standby and
downloads an update, if any
software updates are available
Download new software to TV.
•
For details (p. 41)
If System Update is performed, the software will be updated (it may change TV
functions). If you do not wish to do so, set “Auto Update Search in Standby” to Off.
The Common Interface Module menu provides access to software contained on Common
Interface (CI) Modules.
This TV receiver works only Pay TV modules complying with CI standard.
Off
2 of 2Common Interface
Slot 1:
Module inserted
Access “Common Interface”
select, go
Coloured characters
red
green
yellow
blue
Follow the on-screen instructions
example:
•
On-screen operation guide
may not correspond to the
remote control buttons.
Caution
•
Turn Off Mains power On / Off switch
whenever inserting or removing the CI
module.
•
If a view card and a card reader
come as a set, fi rst insert the card
reader, then insert the view
card into the card reader.
•
Do not insert the module up side down.
•
The features that appear on screen are dependent on the contents of the selected CI
module.
•
Normally pay-TV services will appear without and .
If pay-TV services does not appear, perform and .
•
For more details, see the manual of the CI module, or check with the broadcaster.
Insert the CI module (optional)
Pay-TV
Common
Interface
Select
“System Update Search Now”
Searches for an
update (for several
min.) and displays
a corresponding
message if any
Download
•
Download may take
for about 20 min.
Time Zone
Adjust the
time data
automatically
Auto
: The time data will be adjusted according to your
area automatically.
Others
: The time data will be corrected based on GMT.
Set the time
4
3
5
1
2
Display the menu
If in Analogue mode
Select DVB
access
access
select
access
select
set
select
set
select
access
select
CI slot
Insert or
remove
straightly
and
completely
CI module
Rear of the TV
Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
Off
1/3
Shipping Condition
DVB Profile Edit Access
DVB Service List
Q-Link Settings
Child Lock Access
Access
Tuning Menu
Off Timer Off
Language
Teletext TOP
Setup Menu
GUIDE
ASPECT
OPTION
DIRECT TV REC
PROGRAMME
REC
VCR DVD
TEXT STTL INDEX HOLD
TV
EXIT
MENU
OK
VCR
132
465
798
0
INPUT
RETURN
Wed 12/05/04 10:46Profile Editor
BBC One Wales
All DVB Services
1
BBC THREE7
E414
CBBC Channel70
Cartoon Nwk72
BBCi105
BBC Radio Wales719
BBC Radio Cymru720
BBC One Wales
Profile 1
1
Wed 12/05/04 10:46Profile Editor
BBC One Wales
All DVB Services
1
BBC THREE7
E414
CBBC Channel70
Cartoon Nwk72
BBCi105
BBC Radio Wales719
BBC Radio Cymru720
Profile 1
MENU
26
27
Editing Channels
Select “Setup”
Select “DVB Profi le Edit”,
“DVB Service List” or
“Child Lock”
Set
You can make your favourite channel lists, skip unwanted channels and control channel audience.
■
To return to TV
EXIT
•
Editing Channels
Control
channel
audience
Child Lock
1 of 2Child Lock-PIN Entry
Please enter new PIN
PIN
* * * *
Child Lock
Service List
Change PIN
Access
Wed 12/05/04 10:46Child Lock Service List
BBC One Wales
Service Name
1
BBC THREE7
E414
CBBC Channel70
Cartoon Nwk72
BBCi105
BBC Radio Wales719
BBC Radio Cymru720
Lock
DVB
DVB
DVB
DVB
DVB
DVB
DVB
DVB
Type
VCR
132
465
798
0
■
To change the PIN number
Select “Change PIN” in and enter a new PIN number twice.
You can lock specifi c channels and control who watches them.
(When a channel is selected, a message appears; by entering the PIN number, you can
watch the channel.)
Appears when the channel is locked
Enter the PIN number (4 digits)
Select “Service List”
•
To cancel
Select the locked channel
•
To lock all channels
yellow
•
To cancel all channel locks
blue
Select the channel to be locked
Note
•
Setting “Shipping Condition” (p. 31) erases the PIN number and all settings.
•
Enter the PIN number twice at fi rst
setting.
•
Make a note of the PIN number in
case you forget it.
Select DVB or Analogue
•
“DVB Profi le Edit” and “DVB Service List” are
available in DVB mode only.
green
•
To add all channels
to the list
yellow
Create your favourite channel list (Profi le) from various broadcasters (up to 4: Profi le 1 to 4).
The list is displayed in information banner (p. 15) and then easily accessed.
To display
another Profi le
blue
A channel is added
Select a channel and add it to the list
Store
■
To edit Profi le
Select the fi eld of Profi le to edit and:
•
To name the Profi le
red
Select the character
RETURN
•
To move the channel
green
Select the new position Confi rm
green
•
To delete the channel
yellow
•
To delete all channels
blue
List
favourite
channels
DVB
Profi le Edit
(DVB mode)
Skip
unwanted
channels
DVB
Service
List
(DVB mode)
You can hide unwanted services. The deleted services cannot be displayed except in this function.
Use this function to skip unwanted services.
Select a service and add / delete
CBBC Channel
DVB Service List
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
70
72
105
719
720
1
7
4
3
5
1
2
Display the menu
:add
:delete (skip)
access
select
access
select
select
add / delete
select
select
set
select
access
Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
1/3
Shipping Condition
DVB Profile Edit
DVB Service List
Q-Link Settings
Child Lock
Tuning Menu
Off Timer Off
Language
Teletext TOP
Access
Setup Menu
Off
Tuning Menu
Auto Setup Access
Analogue Programme Edit
Access
DVB Manual Tuning
Analogue Manual Tuning
Access
Add New DVB Services Access
Access
New Service Message
DVB Signal Condition Access
On
PROGRAMME
REC
VCR DVD
TEXT STTL INDEX HOLD
ASPECT
OPTION
DIRECT TV REC
GUIDE
TV
INPUT
EXIT
MENU
OK
VCR
132
465
798
0
RETURN
MENU
28
29
•
Tuning Channels
Set DVB and
Analogue
channels
automatically
Auto Setup
Set
6
Tuning Channels
Select “Setup”
Select “Tuning Menu”
Display the menu
Select a function
You can re-tune all TV channels when moving house or search for new services which may have recently
started broadcasting.
■
To return to TV
EXIT
Select DVB or Analogue
•
“DVB Manual Tuning”, “Add New DVB Services”, “New Service
Message” and “DVB Signal Condition” are available in DVB
mode only.
•
“Analogue Programme Edit” and “Analogue Manual Tuning” are
available in Analogue mode only.
Automatically set the DVB and Analogue channels received in the area.
If a Child Lock PIN number (p. 27) has been set, it must be entered.
EXIT
RETURN
Start Auto Setup
All tuning data will be erased
Auto Setup
Start Auto Setup
•
All previous settings are erased.
•
The analogue settings are downloaded to a Q-Link compatible equipment connected to the TV.
•
When the operation is completed, the digital broadcast of programme number “1” will appear.
If no DVB services are found, the analogue broadcast will appear.
•
If tuning has not done completely “DVB Manual Tuning”, “Analogue Manual Tuning”
Auto Setup - Digital and Analogue
This will take about 3 mins.
Analogue Scan 2 78 1 41
Digital Scan 5 69
62
Channel Service Name Type Quality
CBBC Channel DVB 10
62 BBC Radio Wales DVB 10
62
BBC Radio Cymru
DVB 10
62
E4
DVB 10
62
Cartoon Nwk
DVB 10
CH 29
Analogue
-
CH 33
BBC1
Analogue
-
Settings are made automatically
3
4
5
2
1
access
select
access
select
access
select
For Auto Setup, using the buttons on the front of the TV
Press repeatedly until “Auto Setup” appears
Access “Auto Setup”
Start “Auto Setup”
■
To return to TV
Edit
Analogue
channels
■
Delete
■
Add
■
Move
■
Change
name
■
Change
sound
system
■
Change
colour
system
Analogue
Programme
Edit
Analogue Programme Edit
1CH33
2CH21
3CH21
4CH60
5CH21
Prog. Chan. Name
1 2 3
X Y Z
F T P
4 5 6
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
Sound Sys.
Colour Sys.
■
To change sound system based on signals
Select the
“Sound Sys.” fi eld
Select
sound system
SC1 : PAL B, G, H / SECAM B, G
SC2 : PAL I
SC3 : PAL D, K / SECAM D, K
F : SECAM L / L’
Analogue Programme Edit
1CH33
2CH21
3CH21
4CH60
5CH21
Prog. Chan. Name
1 2 3
X Y Z
F T P
4 5 6
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
Sound Sys.
Colour Sys.
Analogue Programme Edit
1 CH33
2 CH21
3 CH21
4 CH60
5 CH21
Prog. Chan. Name
1 2 3
X Y Z
F T P
4 5 6
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
Sound Sys.
Colour Sys.
■
To change the name of the broadcaster displayed when selecting channels
Cursor
Select the channel to edit
Edit
■
To delete
red
After confi rming, press
red
■
To add
green
After confi rming, press
green
Edit the analogue programme position settings
Analogue Programme Edit
1CH33
2CH21
3CH21
4CH60
5CH21
Prog. Chan. Name
1 2 3
X Y Z
F T P
4 5 6
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
Sound Sys.
Colour Sys.
Select the “Colour Sys.” fi eld
Select colour system
■
To change colour system based on signal
•
Normally, select “Auto”
■
To move
yellow
Select new
position
yellow
3 FTP
23:35
Corontation Street
CH05 SC1 PAL
Change category
Profile 1
Channel
Name
Select the “Name” fi eld
red
Enter the “User input” mode
Select the character
Set ( Maximum: fi ve characters)
•
To change channel number
“Analogue Manual Tuning” (p. 30)
select
RETURN
Store
Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
1/3
Q-Link Settings
Child Lock
Tuning Menu
Off Timer Off
Language
Teletext
Shipping Condition Access
TOP
Setup Menu
DVB Profile Edit
DVB Service List
GUIDE
INPUT
RETURN
ASPECT
OPTION
DIRECT TV REC
VCR
132
465
798
0
REC
TEXT STTL INDEX HOLD
PROGRAMME
VCR DVD
EXIT
MENU
OK
MENU
30
31
Check the message and initialise
Follow the on-screen instructions
•
“Auto Setup” will automatically start. (p. 12)
■
To re-tune TV channels only, e.g. after moving house
“Auto Setup” (p. 29)
Tuning Channels
3
2
4
Select “Setup”
Select “Shipping Condition”
Display the menu
Set
■
To return to TV
EXIT
Restore Settings
Shipping
Condition
Restore
Settings
Resets the TV to its original condition, i.e. no channels tuned in.
All settings (channels, picture, sound quality, etc.) are reset.
1
All tuning data will be erased
Are you sure?
Are you sure?
EXIT
RETURN
Confirm
Shipping Condition
•
Restore Settings
•
Tuning Channels
Off
DVB Signal Condition
DVB Programme [70] CBBC Channel
0 5 10
Signal Quality
Signal Strength
Selects a channel and checks the DVB signal condition.
Use for adjusting the direction of the aerial.
Signal Quality:
•
Green bar Good
•
Yellow bar Poor
•
Red bar Bad (Check the aerial)
•
To change the programme during the menu appears
Check
DVB signal
DVB Signal
Condition
Display a
notifi cation
message
New Service
Message
New DVB service found!
Press OK to add new service.
Press EXIT to lgnore.
Selects whether to give a notifi cation message when a new DVB service is found. (Off / On)
set
Set DVB
channel
manually
Normally use “Auto Setup” or “Add New DVB Services” for the DVB channel setting.
If tuning has not done completely, use this function.
DVB Manual Tuning
Signal Quality
Stopped
0 10
Signal Strength 0 10
Frequency MHz
[
CH21
]
474,00
Prog. Channel Net ID. Quality
TS ID.Service Name
•
All services found will be added to the
DVB Service List (p. 27) automatically.
DVB Manual
Tuning
Add
DVB channel
automatically
Any new services found will be added to the DVB Service List (p. 27) automatically.
Add New DVB Services
Please wait!
This will take about 3 mins.
569
Prog. Channel Service Name Net ID. TS ID. Quality
ZDF
ARD
•
The new service is added with the current settings
saved as they are.
Add New
DVB Services
Set Analogue
channel
manually
Fine Tuning
Programme 1 [CH33]
Analogue Manual Tuning
Manual Tuning 2 78 411
■
Fine Tuning
Use to make small adjustments to the tuning of an individual channel (affected by weather
conditions, etc.)
■
Manual Tuning
Set Analogue channel manually after Auto Setup.
If a VCR is connected with only the RF cable, select programme position “0”.
Search and storeSelect the channelSelect the programme position
VCR
132
465
798
0
Analogue
Manual Tuning
adjust frequency
( set where the level of “Signal Quality”
becomes the maximum)
select channel
search
store
search
access
select
access
select
Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
2/3
Time Zone Auto
VIERA Link On
Common Interface
System Update
Input Labels
Banner Display Timeout
3 seconds
Access
Setup Menu
Power Save Off
Side Panel Off
Input Labels
AV1 DVD
AV2/AV2S AV2/AV2S
COMPONENT COMPONENT
HDMI HDMI
ASPECT
OPTION
DIRECT TV REC
VCR
132
465
798
0
TEXT STTL INDEX HOLD
PROGRAMME
REC
VCR DVD
GUIDE
INPUT
TV
EXIT
MENU
OK
RETURN
Input Labels
AV1 User input
AV2/AV2S AV2/AV2S
COMPONENT COMPONENT
HDMI HDMI
MENU
32
33
•
Input Labels
Input Labels
2
3
4
Select “Setup”
Select “Input Labels”
Display the menu
Select a input terminal and set
■
To return to TV
EXIT
For easier identifi cation and selection of the input mode, you can label each input terminals or skip
terminal that is not connected to any equipment.
(To select the input mode
p. 16)
1
The labels you set will be displayed in “Input Selection” menu (p. 16) or banner.
•
If “Skip” is selected, you cannot select the mode.
•
How to set “User input” p. 33
set
select
access
select
access
select
User input
Name
ABCDEFGH I JKLMN
UVWXYZ 0123456
abcdef gh i j k lmn
uvwxyz ( )+- . *_
OPQRST
789 ! : #
opqr s t
(maximum: ten characters)
RETURN
User input
Select “User input”
Set characters
You can name each input terminals freely.
Store
access
select
set
select
Advanced
Connection
Function
VIERA Link and Q-Link VIERA Link only Q-Link only
Easy playback
OOO
Power on link
OOO
Power off link
OOO
Speaker control
O
(not via SCART)
O
-
Easy control only with
VIERA remote control
O
(not via SCART)
O
-
Direct TV Recording
O
(not via HDMI)
-
O
Analogue channel download
O
(not via HDMI)
-
O
(HDMI) (SCART) (HDMI) (SCART)
34
35
•
HDMI Functions
•
Q-Link Functions
Q-Link Functions
Q-Link connects the TV and VCR / DVD recorder, enables easy recording and playback.
■
Condition
■
Features available
Some recording equipments are not applicable. Read the manuals of the equipment.
Information
/ Message
Recording information or if recording is not possible, a message is displayed.
(Only when the programme number is “0” or “AV mode” for some equipment.)
Power
on link
and Easy
playback
When VCR or DVD recorder starts playback or direct navigator / function menu
for the equipment are activated, the TV is turned on and input mode is switched
automatically so that you can view the content. (Only when TV is in Standby mode.)
Power off
link
When TV is set to Standby mode, the recording equipment is also automatically
set to Standby. (Only when the videocassette or DVD is not active.)
•
Use the VCR / DVD recorder with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic”, or “SMARTLINK”
•
Connect the equipment to this TV’s AV1 or AV2 terminal via a “fully-wired” SCART cable. (p. 38)
•
Q-Link terminal setup in Setup menu (Q-Link, AV1 / AV2 out). (p. 23)
• “DATA LOGIC” (a trademark of Metz Corporation) • “Megalogic” (a trademark of Grundig Corporation)
• “Easy Link” (a trademark of Philips Corporation) • “SMARTLINK” (a trademark of Sony Corporation)
Read the manuals of the equipment too.
■
Download analogue channel settings
•
Perform Auto Setup. (p. 29)
When fi rst using this TV, see “Auto Setup”. (p. 12)
•
Perform download to the equipment. (p. 23)
(
∗
1): The HDMI logo is displayed on HDMI-compliant equipment.
(
∗
2): Enquire at your local digital equipment retailer shop.
HDMI (high-defi nition multimedia interface) allows you to enjoy high-defi nition digital images and high-
quality sound by connecting the TV and the equipment.
HDMI-compatible equipment (
∗
1) with an HDMI or DVI output terminal, such as a set top box or a DVD
player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see “External Equipment” (p. 38).
Note
•
HDMI is the world’s fi rst complete digital consumer AV interface complying with a non-compression standard.
•
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (
∗
2).
•
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (use
COMPONENT-AUDIO terminals).
•
Audio settings can be made on the “HDMI Input” menu screen. (p. 22)
•
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
•
Use with a PC is not assumed.
•
If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
•
This HDMI connector is “type A”.
•
This HDMI connector is compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
•
An equipment having no digital output terminal may be connected to the input terminal of either “Component”,
“S-VIDEO”, or “Video” to receive analogue signals.
•
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
•
For details of the applicable HDMI signals, see p. 41.
HDMI Functions
■
Summary of Control functions
Connecting with an HDMI cable to Panasonic equipment with VIERA Link function, you can control the equipment
(p. 36). You can use VIERA Link and Q-Link functions together.
What you
see is
What you
record
Direct TV Recording:
Recording the current programme in VCR / DVD recorder
immediately.
■
To change DVB channel, stop recording
GUIDE
EXIT
•
When Direct TV Recording is performed, the
recording equipment is automatically turned on if it
is in Standby mode.
•
The recording equipment is recording from its own
tuner. You can turn the TV off during recording
(Analogue only).
•
If you turn the TV off during recording from an AV
source, the recording will be stopped.
•
When Direct TV Recording is performed while
watching DVB channel, the DVB programme
position is locked and no other DVB channel can
be selected. However you can watch analogue
channels.
INPUT
RETURN
MENU
OK
ASPECT
OPTION
VCR
132
465
798
0
EXIT
DIRECT TV REC
GUIDE
DIRECT TV REC
Advanced
•
HDMI Functions
Off
Off
Off
Setup Menu 2/3
VIERA Link
On
Banner Display Timeout
3 seconds
Input Labels
System Update
Time Zone Auto
Common Interface
Power Save Off
Side Panel Off
GUIDE
INPUT
ASPECT
DIRECT TV REC
VCR
132
465
798
0
TEXT STTL INDEX HOLD
PROGRAMME
REC
VCR DVD
RETURN
EXIT
MENU
OK
OPTION
MENU
36
37
Set to “On”
(default is On)
Select “Setup”
Select “VIERA Link”
2
1
3
Display the menu
∗
Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 2” function.
Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,
Amplifi er, etc.) with HDMI cables allow you to interface them automatically.
The equipment with “HDAVI Control” function enables the following operations:
•
Easy playback (p. 37)
•
Power on link (p. 37)
•
Power off link (p. 37)
•
Speaker control (p. 37)
In addition, the equipment with “HDAVI Control 2” function enables the following operation:
•
Easy control only with VIERA remote control (p. 37)
These features are limited to models incorporating Panasonic’s “HDAVI Control” and “VIERA Link”.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have
developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI
CEC cannot be guaranteed.
Refer to individual manuals for compatibility information. About applicable equipment, consult your local
Panasonic dealer.
VIERA Link “ Control
TM
”
∗
4
HDMI Functions
■
HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
•
RP-CDHG15 (1.5 m)
•
RP-CDHG30 (3.0 m)
•
RP-CDHG50 (5.0 m)
Easy
playback
Automatic Input switching-When the connected Panasonic equipment is operated, input
mode is switched automatically. When it is stopped operating, input mode is returned.
Power on
link
When the connected Panasonic equipment starts playback or direct navigator /
function menu for the equipment are activated, the TV is automatically turned on.
(Only when TV is in Standby mode.)
Power off
link
When TV is set to Standby mode, the connected Panasonic equipment is also
automatically set to Standby.
•
This function will work even if the TV enters standby mode automatically by Off Timer
function or auto power standby function.
■
Preparations
Setup the equipment to enable this function. Read the manuals of the equipment.
About connections, see “External Equipment” (p. 39). Read the manuals of the equipment too.
■
For the fi rst time / When adding new equipment, reconnecting equipment or changing setup
After connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI (p. 16), and make sure that an image is displayed correctly.
Main Menu
VIERA Link
Picture
Sound
Setup
Speaker
control
You can control the theatre speaker with TV’s remote control.
This function is available when Panasonic Amplifi er or Player theatre is connected.
•
If you cannot access the menu, check the
settings and the equipment (p. 36).
Display “VIERA Link Menu”
■
TV
TV speakers are active.
■
Home Cinema
Adjustment for equipment
(automatically turned on if it is in
Standby mode).
Volume up / down
Mute
Select “Speaker Selection”
Set to “Home Cinema” or
“TV”
•
The sound of TV speakers is mute.
•
When the equipment is turned off,
TV speakers will be active.
VIERA Link Control
Speaker Selection
VIERA Link Menu
Home Cinema
Recorder
Easy
control
only with
VIERA
remote
control
You can control some functions of the
connected Panasonic equipment with
this TV remote control (point the remote
control at the TV’s signal receiver).
•
If you cannot access the menu, check the
settings and the equipment (p. 36).
Access the menu of the equipment
Display “VIERA Link Menu”
•
Example:
•
About the operations for the equipment, read the manual of the equipment.
DVD Recorder DIGA HD Video Camera Player theatre
HDD
FUNCTION MENU
Playback
Recording
Delete
Copy
To Others
ALL
DATE/TIME
2006.12. 1 10:46
8 / 8
Listen
Start
Watch
Import/Record
Setup
Move the cursor / select the
menu
Move the cursor / access /
adjust
Store / Set / Access
RETURN
Return to the previous
menu
EXIT
Exit the menu
OPTION
The same functions with
the OPTION button of the
equipment
red
green
yellow
blue
Access when the key words
are displayed on colour bar
•
Available VIERA remote control buttons:
(depending on the connected equipment)
Operate the menu of the equipment
Select the
equipment you
want to access
VIERA Link Control
Speaker Selection
VIERA Link Menu
Home Cinema
Recorder
Select “VIERA Link Control”
set
access
select
select
access
select
select
select
set
Advanced
•
External Equipment
Connector
Recording / Playback
(equipment)
AV1 AV2
COMPONENT
Y
P
B
PR
L
R
AUDIO OUT
To record / playback videocassettes / DVDs
(VCR / DVD recorder)
To watch DVDs (DVD player)
To watch camcorder images (Video camera)
To watch satellite broadcasts (Set top box)
To play games (Game equipment)
To use amplifi er with speaker system
Q-Link
Direct TV Recording
VIERA Link
38
39
These diagrams show our recommendations for how to connect the TV to your various equipment.
For other connections, consult the instructions for each piece of equipment, the table below, and the
specifi cations (p. 43).
External Equipment
■
Easy playback, Easy control
only with VIERA remote control
■
Home Cinema
Panasonic DVD Recorder,
HD Video Camera, etc.
Panasonic
Amplifi er
Panasonic DVD Recorder
Speaker system
Panasonic
Player theatre
•
Use fully wired HDMI compliant cable.
•
Read the manuals of the equipment too.
VIERA Link (p. 36)
Speaker system
: Recommended Connection
■
Types of connectable equipment to each connector
Amplifi er with speaker system
To listen with speakers
DVD Recorder / VCR
SCART
cable
RF cable
To record / playback
To watch DVDs
DVD player
(Viewing)
(Listening)
or
This slot is for services
by the Panasonic dealer.
Fully wired HDMI
compliant cable
Set top box
To watch satellite broadcasts
SCART cable
DVD Recorder
HDMI equipment
Fully wired HDMI
compliant cable
SCART cable
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
Panasonic Viera TH-37PX7H Owner's manual
- Category
- LCD TVs
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI