Samsung SV-7000W User manual

Category
Cassette players
Type
User manual
WORLDWIDE VIDEO
CASSETTE RECORDER
SV-7000W
Owner’s Instructions
VCR
POWER
EJECT
INDEX REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
1
2
3
4
5
6
7
8
9
0
CLR/RST
100
CH
R
E
W
P
L
A
Y
F
.
F
DISPLAY MONITOR A.DUB
REC
P/STILL
INPUT
SYSTEM
OUTPUT
SYSTEM
AUTO MENU
REV
FWD
STOP
STROBE AUDIO
OK
T
R
A
C
K
I
N
G
S
L
O
W
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 1
IMPORTANT SAFETY INSTRUCTIONS
To ensure proper warranty, please return your
registration card within two weeks. Record
the serial number from the back of the VCR
and the date of purchase in the space below.
Keep your purchase receipt with this manual
for easy reference.
Note to CATV system installer
: This reminder is provided to call CATV system installer's attention to
Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building as close to the point of cable entry as practical.
Caution: FCC regulations state that any unauthorized changes or modifications to this equipment
may void the user's authority to operate it.
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention: pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la
borne correspondante de la prise et pousser jusqu'au fond.
Important
: One Federal Court has held that unauthorized recording of copyrighted TV programs is
an infringement of U.S. copyright laws.
Certain Canadian programs may be copyrighted and any unauthorized recording in whole or in part
may be a violation of these rights.
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance
to rain or moisture.
1. Read Instructions-All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions-The safety and operating instructions should be retained for future reference.
3. Heed Warnings-All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions-All operating and use instructions should be followed.
Model Number
Serial Number
Date Purchased
Dealer
I
IMPORTANT SAFETY INSTRUCTIONS
This symbol indicates high voltage is present inside. It is
dangerous to make any kind of contact with any inside part
of this product.
This symbol alerts you that important literature concerning
operation and maintenance has been included with this
product.
CAUTION:TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED SER-
VICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
00407A)SV-7000W-GB-0_sea 7/24/01 10:53 AM Page 1
5. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. Water and Moisture-Do not use this product near water-for example near a bath tub, wash bowl, kitchen
sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories-Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury to a child or adult, and serious dam-
age to the product. Use only with a cart, stand, tripod, bracket, or table recommended
by the manufacturer or sold with the product. Any mounting of the product should fol-
low the manufacturer's instructions and should use a mounting accessory recommended
by the manufacturer.
9. Cart Usage-A product and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and cart combination to overturn.
10. Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper venti-
lation is provided or the manufacturer's instructions have been adhered to.
11. Power Sources-This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your product dealer
or local power company. For products intended to operate from battery power, or other sources, refer to
the operating instructions.
12. Grounding or Polarization-This product may be equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is
a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety pur-
pose of the polarized plug.
13. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14. Outdoor Antenna Grounding-If an outside antenna or cable
system is connected to the product, be sure the antenna or cable
system is grounded so as to provide some protection against
voltage surges and built-up static charges. Section 810 of the
National Electrical Code, ANSI/NFPA 70 provides information
with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes, and require-
ments for the grounding electrode.
15. Lightning-For added protection for this product during a lightning storm or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable sys-
tem. This will prevent damage to the product due to lightning and power-line surges.
16. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from touching such power lines or cir-
cuits as contact with them might be fatal.
17. Overloading-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
IMPORTANT SAFETY INSTRUCTIONS
II
Antenna Lead-in Wire
Ground Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Section 810-21)
Grounding Clamps
Electric Service Equipment
NEC-NATIONAL ELECTRICAL CODE
00407A)SV-7000W-GB-0_sea 7/24/01 10:53 AM Page 2
18. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
19 Servicing-Do not attempt to service this product yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20 Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a When the power-supply cord or plug is damaged.
b If liquid has been spilled or objects have fallen into the product.
c If the product has been exposed to rain or water.
d If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation.
e If the product has been dropped or damaged in any way.
f When the product exhibits a distinct change in performance-this indicates a need for service.
21. Replacement Parts-When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
22. Safety check-Upon completion of any service or repairs to this product, ask the service technician to per-
form safety checks to determine that the product is in proper operating condition.
23. Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
III
00407A)SV-7000W-GB-0_sea 7/24/01 10:53 AM Page 3
1
GB
EJECT
TRACKING
SPEED AUDIO OUT
RESET
NORMAL(VHS) SQPB ONLY
VIDEO
LINE 1 IN
AUDIO
LR
PLAY
STOP
F.F
REW
REC
PAUSE/STILL
TH
ROUG
H
NTSC
NTSC4.43
M
ESECA
M
PAL-M
SECA
M
PAL-N
AUTO
SECAM
PAL-M
PAL-N
POWER
PAL
NTSC
PA
L
CHANNEL
INPUT
OUTPUT
S
PEED CLK/COUNT PICTURE TIMER
ART INPUT
2
3
5
6
STROBE AUDIO
R
E
W
P
L
A
Y
F
.
F
DISPLAY MONITOR A.DUB
REC
P/
S
STOP
VCR
POWER
INDEX REC.SPEED CLK/COUNT PIC
T
ART
INPUT
6
9
CLR/RST
CH
P
L
A
Y
F
.
F
6
9
CLR/RST
CH
P
L
A
Y
F
.
F
R
E
W
F
.
F
DISPLAY MONITOR A.DUB
REC
P/
S
STOP
To record a Program now
To record a Program and
let it stop automatically
To record a Program when
you’re away
Insert the cassette.
Insert the cassette.
Select the channel by pressing the
CH buttons ( or ) on the
remote control.
Insert the cassette.
Press the TIMER button on the
remote control.
Select the channel by pressing the
CH buttons ( or ) on the
remote control.
Press REC for at least one second
to start recording.
Enter the Timer program data.
Then press the MENU button.
Press REC for at least one second
to start recording.
When you have finished recording,
press STOP ( ).
Press REC several times until the
required recording time is
displayed.
Result
: Recording stops automati-
cally at the end of the
required time.
Press VCR POWER to turn off the
VCR and to activate the timer.
Quick Look-Up Guide
CLOCK: 1/JAN WED 12:32
CH DAY START
®
STOP
¨
--- ---- --:--
®
--:--
¨¨
--- ---- --:--
®
--:--
¨¨
--- ---- --:--
®
--:--
¨¨
--- ---- --:--
®
--:--
¨¨
--- ---- --:--
®
--:--
¨¨
--- ---- --:--
®
--:--
¨¨
¹
SET:
¨
DELETE:CLR/RST MENU
00407A)SV-7000W-GB-0_sea 7/24/01 10:53 AM Page 4
2
GB
Contents
FOREWORD
Safety Instructions......................................................................................... 4
Getting Started .............................................................................................. 5
VCR OVERVIEWS
Front View of the VCR................................................................................... 6
Rear View of the VCR ................................................................................... 6
Display Indicators.......................................................................................... 7
Infrared Remote Control................................................................................ 7
CONNECTING YOUR VIDEO CASSETTE RECORDER
Worldwide VCR Background ........................................................................ 8
Worldwide TV Color System.......................................................................... 8
Multi-System VCR vs Worldwide VCR.......................................................... 9
System Conversion with the Worldwide VCR................................................ 10
Tape Conversion with the Worldwide VCR ................................................... 11
Deciding How to Connect Your VCR............................................................. 13
Connecting Your VCR to the TV.................................................................... 14
SETTING UP YOUR VIDEO CASSETTE RECORDER
Inserting the Batteries in the Remote Control................................................ 15
Plug and Initial Setting................................................................................... 15
User Set1 Setting .......................................................................................... 16
User Set2 Setting .......................................................................................... 16
Setting the Date and Time............................................................................. 17
To turn On-Screen Information on/off............................................................ 17
Setting the VCR RF out System.................................................................... 18
Setting the RF OUT CHANNEL..................................................................... 19
Presetting the Stations Automatically............................................................ 20
Presetting the Stations Manually................................................................... 21
RECORDING TELEVISION BROADCASTS
Selecting the Cassette Type.......................................................................... 22
Selecting the Recording Speed..................................................................... 22
Protecting a Recorded Cassette.................................................................... 22
Recording a Program .................................................................................... 23
Stopping a Recording Temporarily................................................................ 23
Recording a Program with Automatic Stop.................................................... 24
Using the Timer Programming Feature......................................................... 25
VCR Plus+ Recording (AMERICA only)........................................................ 26
VCR Plus+ Set up (AMERICA only).............................................................. 27
Checking a Preset Recording........................................................................ 28
Cancelling a Preset Recording...................................................................... 28
PLAYING BACK
Playing a Cassette......................................................................................... 29
Selecting the PLAY SYSTEM Mode.............................................................. 29
Receiving Stereo Broadcasts........................................................................ 30
Receiving SAP Broadcasts............................................................................ 30
SQPB (Super VHS Quasi PlayBack)............................................................. 31
Adjusting Picture Alignment Manually........................................................... 31
Adjusting Picture Sharpness ......................................................................... 32
Selecting the Audio Output Mode.................................................................. 32
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 2
3
GB
REWINDING AND FAST-FORWARDING
Rewinding and Fast-forwarding a Cassette................................................... 33
Playing a Cassette in Slow Motion................................................................ 33
Playing a Sequence Frame by Frame........................................................... 34
Playing a Sequence at Variable Speeds....................................................... 34
SPECIAL FUNCTION
STROBE........................................................................................................ 35
ART ............................................................................................................... 35
MONITOR...................................................................................................... 35
SEARCHING FOR A SEQUENCE
Searching for a Specific Sequence ............................................................... 36
Using the Tape Counter ................................................................................ 37
ADVANCED RECORDING FEATURES
Using the Assemble Edit Function................................................................. 38
Connecting Other Equipment to Your VCR................................................... 39
Recording from Another VCR or Camcorder................................................. 40
TV System Conversion.................................................................................. 41
Playback Conversion..................................................................................... 41
Conversion Recording................................................................................... 42
Hi-Fi Audio System........................................................................................ 43
Audio Dubbing a Pre-recorded Cassette....................................................... 44
Recording an FM Simulcast Program............................................................ 45
OTHER FUNCTIONS AND USEFUL RECOMMENDATIONS
Locking Your VCR......................................................................................... 46
Resetting Your VCR...................................................................................... 46
Technical Specifications................................................................................ 47
SOLVING PROBLEMS
Troubleshooting Guide.................................................................................. 48
GLOSSARY
Glossary of Terms......................................................................................... 49
WORLD BROADCAST SYSTEMS ................................................................................. 50
INTERNATIONAL SERVICE NETWORK ......................................................................... 51
NoteImportantHold downPress/push
Symbols
Contents (cont.)
1
1
1
= Step number
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 3
4
GB
The following illustrations represent the precautions to be taken when using this video cassette
recorder.
The lightning flash with arrowhead in the triangle is a warning sign alerting you to
dangerous voltage inside the product.
DO NOT OPEN THE VCR.
HH
5¡C
40¡C
10% 75%
THIS UNIT IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS.
Safety Instructions
Do NOT expose the VCR to
extreme temperature conditions
(below 5°C(41°F) and above
40°C(104°F) or to extreme
humidity conditions (less than
10% and more than 75%).
Do NOT expose the VCR to
direct sunlight.
Do NOT expose the VCR to
any liquids.
Do NOT place any objects on
the VCR or remote control.
During a storm and/or lightning,
unplug the VCR from the AC
outlet and antenna.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 4
(EUROPE...) (AMERICA...)
5
GB
Getting Started
Thank you for purchasing a SAMSUNG Video Cassette Recorder (VCR).
Together with your VCR, you will find the following accessories in the box.
Your Owner’s Instructions contain much valuable information on setting up and using your VCR.
Please take the time to read them as they will help you take full advantage of the VCR’s features.
The manual is organized as follows:
A series of step-by-step procedures for each function available forms the main body of the
manual.
You can consult the glossary on page 49, to obtain an explanation of the main technical terms
used throughout this manual.
On pages 6 and 7, you will find illustrations of the VCR (front and rear), the display and the
remote control unit to help you find the buttons and understand the symbols displayed.
Preparing Your Video Cassette Recorder
Before being able to play and record video cassettes, you must prepare and connect your VCR.
Insert batteries in the remote control.
Connect your VCR to the television.
Set the date and time used to display information on the television screen.
Preset the stations.
All these operations are essential, so you must follow the step-by-step instructions carefully.
REMOTE CONTROL
(AC59-00010D)
BATTERIES “AAA”
(AC43-12002H)
OWNER’S
INSTRUCTIONS
(AC68-00407A)
COAXIAL CABLE
(AC39-42001L)
COAXIAL CABLE
(AC39-42001J)
RF ADAPTORS
(M:3705-001095
F:3705-001096)
RCA CABLE(AUDIO)
(AC39-42001U)
RCA CABLE (VIDEO)
(AC39-22017Z)
V
C
R
P
O
W
E
R
EJECT
IN
D
E
X
R
E
C
.S
P
E
E
D
C
L
K
/C
O
U
N
T
P
IC
T
U
R
E
T
IM
E
R
A
R
T
IN
P
U
T
1
2
3
4
5
6
7
8
9
0
C
LR
/R
S
T
1
00
C
H
R
E
W
P
L
A
Y
F
.
F
D
IS
P
LA
Y
M
O
N
IT
O
R
A
.D
U
B
R
E
C
P
/S
T
ILL
IN
P
U
T
S
Y
S
T
E
M
O
U
T
P
U
T
S
Y
S
T
E
M
A
U
T
O
M
E
N
U
R
E
V
FWD
S
T
O
P
S
T
R
O
B
E
A
U
D
IO
O
K
T
R
A
C
K
I
N
G
S
L
O
W
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 5
6
GB
VIDEO
OUT
2
R
L
AUDIO
OUT
1
R - AUDIO - L VIDEO
LINE 2 IN
EURO AV
TV
VIDEO
OUTPUT 2
JACK
VIDEO
OUTPUT 1
JACK
RCA VIDEO
INPUT JACK
ANTENNA IN
RF CONNECTOR
Front View of the VCR
Rear View of the VCR
RCA AUDIO L, R
OUTPUT 2 JACKS
RCA AUDIO
L, R OUTPUT 1
JACKS
RCA AUDIO
L, R INPUT
JACKS
OUT TO TV
RF CONNECTOR
AUDIO/VIDEO IN/OUT
SCART (EURO-21) JACK
EJECT
TRACKING
SPEED AUDIO OUT
RESET
NORMAL(VHS) SQPB ONLY
VIDEO
LINE 1 IN
AUDIO
LR
PLAY
STOP
F.F
REW
REC
PAUSE/STILL
THROUGH
NTSC
NTSC4.43
MESECAM
PAL-M
SECAM
PAL-N
AUTO
SECAM
PAL-M
PAL-N
POWER
PAL
NTSC
PAL
CHANNEL
INPUT
OUTPUT
SQPB
SELECTION
SWITCH
RCA VIDEO
INPUT JACK
SYSTEM STANDARD
INPUT SELECTION
BUTTONS
SYSTEM
STANDARD
OUTPUT
SELECTION
BUTTONS
CHANNEL
BUTTONS
RECORD
BUTTON
REW
BUTTON
STOP
BUTTON
F.F
BUTTON
PAUSE/STILL
BUTTON
RESET
BUTTON
POWER
BUTTON
TRACKING
BUTTONS
EJECT
BUTTON
RECORDING
SPEED SELECTION
BUTTON
AUDIO OUT
BUTTON
RCA AUDIO
L, R INPUT
JACKS
PLAY
BUTTON
VIDEO CASSETTE
COMPARTMENT
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 6
7
GB
VCR
POWER
EJECT
INDEX REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
1
2
3
4
5
6
7
8
9
0
CLR/RST
100
CH
R
E
W
P
L
A
Y
F
.
F
DISPLAY MONITOR A.DUB
REC
P/STILL
INPUT
SYSTEM
OUTPUT
SYSTEM
AUTO MENU
REV
FWD
STOP
STROBE AUDIO
OK
T
R
A
C
K
I
N
G
S
L
O
W
VCR POWER BUTTON
REC.SPEED BUTTON
INDEX BUTTON
CLK/COUNT BUTTON
NUMERIC BUTTONS
100 BUTTON
PLAY BUTTON
REWIND/REVERSE PICTURE SEARCH
BUTTON
RECORD BUTTON
DISPLAY BUTTON
MONITOR BUTTON
INPUT SYSTEM BUTTON
OK BUTTON
MENU SELECTION SHIFT BUTTONS
AUTO TRACKING BUTTON
TRACKING BUTTONS
EJECT BUTTON
PICTURE BUTTON
TIMER PROGRAM BUTTON
STROBE BUTTON
AUDIO OUT SELECTION BUTTON
ART BUTTON
TUNER, SC, AV, LINE 1, LINE 2 SELECTION
BUTTON
CH UP/DOWN BUTTONS
STROBE, ART UP(+), DOWN(-) BUTTONS
CLR/RST BUTTON
FAST-FORWARD/FORWARD SEARCH BUTTON
STOP BUTTON
PAUSE/STILL BUTTON
AUDIO DUBBING BUTTON
OUTPUT SYSTEM BUTTON
MENU SELECTION UP/DOWN BUTTONS
MENU BUTTON
SLOW BUTTONS
JOG/SHUTTLE RING
1 2 4 5 6 7 8 10
3 9 11
Display Indicators
Infrared Remote Control
1 Timer indicator 5 Conversion indicator 9 Multi-function display
2 Recording speed indicator 6 Output select indicator 10 Hi-Fi indicator
3 Cassette in/out indicator 7 SQPB Indicator 11 Audio Level meter
4 Input select indicator 8 INDEX Indicator
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 7
Worldwide VCR Background
8
GB
Worldwide TV Color System
Many countries have different TV signal formats, with no exchangeability between them. This makes it
impossible to play back or record tapes with different signal formats. This worldwide common VCR
overcomes this problem by converting the signal format of any tape into the format you desire.
Comparison of TV color systems
Classification of TV color systems by country
NTSC : Korea, U.S., Canada, Japan, Taiwan, and Philippines
PAL : United Kingdom, Germany, Western Europe, China, and Singapore
SECAM : France, Eastern Europe, and CIS
PAL-M : Brazil
PAL-N : Argentina (The tape is the same as that of PAL)
NTSC4.43 : Pseudo NTSC signal which is made to use NTSC tape in the Middle East
(The tape is the same as that of NTSC3.58)
MESECAM : The name of a tape which uses the SECAM signal recording method.
The output signal during playback is SECAM signal.
Worldwide Broadcasting system is B/G, I, D/K, M, N, L.
Number of
scanning lines
Field
frequency
Line frequency
Color signal
modulation
system
Color signal
frequency
Burst signal
NTSC NTSC4.43 PAL-M PAL PAL-N SECAM
MESECAM
525
625
3.579545
MHz
Fixed phase Inverted by 1 H
DR.DB alternation
FM modulation
4.433619
MHz
3.575611
MHz
4.433619
MHz
3.582056
MHz
DB 4.25MHz
DR 4.40625MHz
60Hz 50Hz
15.734KHz
15.625KHz
Sub carrier suppression quadrature modulation
“Worldwide Communication through VCR”
Today, the Video Recorder is a major media and communication tool, used for both business and home
entertainment. Furthermore, the emergence of the camcorder has extended the versatility of video,
enabling home video making.
Video communication is increasingly becoming a global medium, but different TV broadcasting systems
around the world hinder the worldwide exchange of video tapes.
The Samsung SV-7000W overcomes the incompatibility of different TV broadcasting systems through
sophisticated digital technology, allowing any standard VHS tape to be played on any TV, anywhere in
the world (with free voltage).
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 8
9
GB
Multi-System VCR vs Worldwide VCR
The Worldwide VCR is similar to the Multi-System VCR in that it will play back tapes recorded in any
TV Broadcasting System. However, there are a few key differences:
NTSC
PAL
SECAM
NTSC PAL SECAM
Multi-System VCR
With a Multi-System VCR:
The TV must correspond to the system of the tape being
played, otherwise, a Multi-System TV is also required;
Tape duplication with system conversion (eg NTSC to PAL) is
not possible.
NTSC PAL SECAM
SV-7000W Worldwide VCR
ANY TV
With the Worldwide VCR:
Tapes can be played on any TV monitor;
Recordings can be made in any TV Broadcasting System,
even if the tape is of a different system;
Tape duplication with system conversion is possible.
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 9
System Conversion with the Worldwide VCR
10
GB
System conversion is the most complex digital process undertaken by the Worldwide VCR, converting
the “input” into a different “output”, eg from NTSC to PAL, or from PAL to SECAM.
INPUT OUTPUT
NTSC (3.58)
NTSC 4.43
PAL
PAL-M
PAL-N
SECAM
NTSC (3.58)
NTSC 4.43
PAL
PAL-M
PAL-N
SECAM
MESECAM (TAPE ONLY)
NTSC PAL PAL-M SECAM MESECAM
NTSC PAL PAL-M SECAM MESECAM
I
INPUT SELECTION
II
OUTPUT SELECTION
III
SYSTEM CONVERSION
VCR automatically selects the
correct TV broadcast system of
the input signal:
VCR digitally converts scanning
lines, frequency fields and color
signal into the desired system as
selected in step ll.
A. When RECORDING
The ‘input’ is the external TV
signal or the output from a
second VCR or LDP
B. During PLAYBACK
The ‘input’ comes from the
tape loaded for playback
The broadcast system of the
tape - on which the recording is
to be made - is selected on the
VCR ‘output’ panel
Recording in the desired
TV system
The broadcast system of the
TV - on which playback is to
be viewed - is selected on the
VCR ‘output’ panel
Playback can be viewed
on any monitor
A. TV RECORDING
B. PLAYBACK
ANY
TAPE
ANY TV
ANY
TAPE
Output:
Input signal converted to the
system of the tape loaded
Input Output
LINE IN
Input signal to be
recorded
EJECT
TRACKING
SPEED AUDIO OUT
RESET
NORMAL(VHS) SQPB ONLY
VIDEO
LINE 1 IN
AUDIO
LR
PLAY
STOP
F.F
REW
REC
PAUSE/STILL
THROUGH
NTSC
NTSC4.43
MESECAM
PAL-M
SECAM
PAL-N
AUTO
SECAM
PAL-M
PAL-N
POWER
PAL
NTSC
PAL
CHANNEL
INPUT
OUTPUT
PLAY
STOP
F.F
REW
“input”
select panel
“output”
select panel
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 10
11
GB
Tape Conversion with the Worldwide VCR
One of the most useful functions of the Worldwide VCR is the combination of tape duplication and
system conversion, more simply known as “Tape Conversion”. This allows the user to copy, for
example, a SECAM tape and simultaneously convert it to PAL or NTSC. This is particularly useful for
duplicating home video camcorder recordings and sending them to friends or relatives abroad.
NTSC
PAL
PAL-M
SECAM
MESECAM
NTSC
PAL
PAL-M
SECAM
MESECAM
NTSC
PAL
PAL-M
SECAM
MESECAM
NTSC
PAL
PAL-M
SECAM
MESECAM
NTSC
PAL
PAL-M
PAL-N
SECAM
MESECAM
NTSC
NT4.43
PAL
PAL-N
PAL-M
SECAM
Any VHS Tape
Any VHS Tape
SV-7000W
AS A PLAYBACK VCR
SAMSUNG
Worldwide VCR
2nd VCR
AS A RECORDING VCR
Any VCR
SV-7000W
AS A RECORDING VCR
SAMSUNG
Worldwide VCR
2nd VCR
AS A PLAYBACK VCR
Corresponding VCR
VHS Tape
Corresponding
Any VHS Tape
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 11
12
GB
NTSC
PAL
PAL-M
SECAM
MESECAM
NTSC
PAL
PAL-M
SECAM
MESECAM
PUSH
S-VIDEO
MIC
LOCK
STANDBY
PUSH
S-VIDEO
M
IC
L
O
C
K
S
T
A
N
D
B
Y
V HS-C
Any 8mm Tape
8mm CAMCORDER
AS A PLAYBACK VCR
Corresponding
Camcorder
Any VHS Tape
SV-7000W
AS A RECORDING VCR
SAMSUNG Worldwide VCR
SV-7000W
AS A RECORDING VCR
SAMSUNG
Worldwide VCR
Any VHS-C
Tape
VHS-C Tape
Adapter
2nd VCR
AS A PLAYBACK VCR
Corresponding VCR
Any VHS Tape
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 12
13
GB
Deciding How to Connect Your VCR
You must take into account various factors when deciding how to connect up your various audio
and/or video systems.
Types of connectors available on your systems.
Systems connected permanently to the VCR (satellite receiver for example) or from time to
time (camcorder for example).
Your VCR is equipped with the following connectors.
Connector Location Type Direction Recommended Use
AV Rear SCART In/Out Television
LINE Rear Audio/Video RCA Out Television
Other VCR
LINE 1 Front Audio/Video RCA In Audio system
Camcorder
Other VCR
LINE 2 Rear Audio/Video RCA In Audio system
Camcorder
Satellite receiver
Other VCR
OUT TO TV Rear 75 ½ Out Television
coaxial
IN FROM ANT. Rear 75 ½ In Antenna
coaxial Cable television network
Whenever you connect an audio or video system to your VCR, ensure that all units are
switched off
.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
TV
EURO AV
VIDEO
OUT 2
R
L
AUDIO
OUT 1
R - AU
VIDEO
LINE1 IN
AUDIO
LR
R - AUDIO - L VIDEO
LINE 2 IN
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 13
14
GB
Connecting Your VCR to the TV
To receive television programs from an over-the-air or cable
television network, a signal must be received from one of the
following sources.
An outdoor antenna.
An indoor antenna.
A cable television system.
Make sure that both the television and the VCR are
switched off
before connecting the cables.
1 Remove the 75½ coaxial cable from the television.
2 Connect this cable to the 75½ coaxial socket marked on the
rear of your VCR.
3 Plug the coaxial cable supplied into the socket on your VCR.
4 Plug the other end of the coaxial cable into the connector
previously used for the antenna on the television.
5 Connect one end of the RCA cable supplied to the output jacks
(OUT1 or OUT2) on the rear of the VCR.
Respect the color coding of the Audio and Video In/Out
cable.
6 Connect one end of the SCART cable to the EURO AV socket on
the rear of the VCR.
7 Plug the other end (of the RCA cable or SCART cable) into the
appropriate connector on the television.
Regardless of the type of connection chosen, you must
always connect the coaxial cable supplied. Otherwise, no
picture will be visible on the screen when the VCR is
switched off.
* NOTICE:
Use the supplied RF adaptors as needed when making RF
connections.
[NTSC/PAL-M Region]
TV
VIDEO
TV
VIDEO
V
TV
VIDEO
OUT 2
R
L
AUDIO
OUT 1
R - AUDIO - L VIDEO
LINE 2 IN
EURO AV
TV
TV
2
3
6
VIDEO
OUT 2
R
L
AUDIO
OUT 1
R - AUDIO - L VIDEO
LINE 2 IN
EURO AV
TV
5
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 14
15
GB
You must insert or replace the batteries in the remote control when
you:
purchase the video cassette recorder ; or
find that the remote control is no longer working
correctly.
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AAA or equivalent batteries (supplied), taking care to
respect the polarities.
+ on the battery with + on the remote control.
– on the battery with – on the remote control.
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
The VCR automatically displays the initial setting MENU when the
VCR is plugged into the AC outlet for first time.
1 Plug the VCR into the AC outlet.
Result
: The LANGUAGE SET is displayed.
2 Press the , and OK button to select your favorite language.
Result
: The COUNTRY SET is displayed.
3 Press the ,
,
button to select your country region.
Result
: The country list is displayed.
4 Press the ,
,
and OK button to select your country.
If your country does not appear in the country list, then
select OTHERS.
Inserting the Batteries in the Remote Control
Plug and Initial Setting
1
**
LANGUAGE SET
**
¨
ENGLISH
DEUTSCH
FRAN‚AIS
ITALIANO
ESPANOL
JAPANESE
¹
MEMORY:(OK)
**
COUNTRY SET
**
EUROPE
¨
AMERICA
ASIA/OCEANIA
MIDDLE EAST/AFRICA
¹
¨
**
AMERICA
**
¨
U.S.A. CANADA
MEXICO BRAZIL
ARGENTINA CHILE
COLOMBIA VENEZUELA
PERU PANAMA
OTHERS:M
¹
¨
MEMORY:(OK)
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 15
USER SET1 Setting
16
GB
The user set is initially set at the factory. If you want to make any
changes to the USER SET, please follow the instructions below.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the ,
,
button to select user set.
Result
: The USER SET1 is displayed.
3 Press ,
,
to select the USER SET1 item.
4 Check below to change the item.
* USER SET1
ITEM USAGE COMMENT
TAPE tape length select Select the recording tape type for
SELECT remain time.
CLOCK 12H/24H mode Select your favorite clock type.
TYPE
PLAY play tape system The VCR automatically selects the
SYSTEM selection play system. If an auto detection
error occurs, then select the play
system manually.
OSD OSD display on/off Initial setting is on.
USER SET2 USER SET2 select Select to go to USER SET2 page.
**
M E N U
**
TIMER PROGRAMMING
¨
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
¹
¨
END:(MENU)
**
USER SET1
**
¨
TAPE SELECT :E180/
T120
CLOCK TYPE :12H
PLAY SYSTEM :AUTO
OSD :ON
USER SET2
¹
¨
END:(MENU)
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the ,
,
button to select user set.
Result
: The USER SET1 is displayed.
3 Press ,
,
to select the USER SET2.
4 Press ,
,
to select the USER SET2 menu item.
5 Check below to change the item.
* USER SET2
USER SET2 Setting
ITEM USAGE COMMENT
SAP SAP on/off Initial mode is SAP OFF.
COLOR COLOR or B/W Initial mode is on. Color off mode is
select B/W. If color distortion occurs in
the play or conversion mode, then
select color off mode.
BLUE BLUE SCREEN Initial is blue screen on. If any
SCREEN on/off problem occurs with the blue
screen, then select blue screen off.
USER SET1 USER SET1 select Select to go to USER SET1 page.
**
M E N U
**
TIMER PROGRAMMING
¨
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
¹
¨
END:(MENU)
**
USER SET1
**
TAPE SELECT :E180/
T120
CLOCK TYPE :12H
PLAY SYSTEM :AUTO
OSD :ON
¨
USER SET2
¹
¨
END:(MENU)
**
USER SET2
**
¨
SAP :OFF
COLOR :ON
BLUE SCREEN :ON
USER SET1
¹
¨
END:(MENU)
00407A)SV-7000W-GB-1_sea 7/24/01 11:14 AM Page 16
1 / 1

Samsung SV-7000W User manual

Category
Cassette players
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document