Penclic B2 User manual

How to get started - B2

Step one – Insert the rechargeable battery and start charging

with the included micro-USB charging cable. When the battery

is fully charged the light of the LED will be steady green. The

mouse can be used while charging.

Step three – Make sure the Bluetooth connection on your

computer is active.

Step four – Search for Bluetooth device on your computer.

Step two – Set the power switch on the bottom of the mouse to ON.

Start working! Penclic Mouse makes hours of working and surng easy and efcient.

Penclic AB / contact@penclic.se / www.penclic.se / +46 8 544 98 995

Step ve – Press the button under the mouse to activate the

Bluetooth search and select Penclic B2 Bluetooth Mouse.

Step six – Lightly hold the pen shaft between your thumb and

index nger. Adjust the pen angel to suit your personal grip.

Step three and step four may differ depending on which operating system you use, easiest is to search how to ”connect Bluetooth” online.

1 Left click

2 Right click

3 Middle click

4 Backward click

5 Forward click

6 Scroll wheel

7 On-off button

8 Bluetooth button