ITC T-6240 Operating instructions

T-6240
ITC
Brand
ITC
Model
T-6240
Type
Operating instructions

Below you will find brief information for T-6240.This is an 8-channel pre-amplifier with individual treble and bass control for each input. It features a microphone input with automatic/manual calling switch, 8 line inputs, and 2 EMC inputs. The device allows for priority override of EMC signals and muting capabilities. It has separate controls for volume, treble, and bass and is designed with a 2U aluminum alloy panel. MIC input can cut off the EMC input signal.

Below you will find brief information for T-6240.This is an 8-channel pre-amplifier with individual treble and bass control for each input. It features a microphone input with automatic/manual calling switch, 8 line inputs, and 2 EMC inputs. The device allows for priority override of EMC signals and muting capabilities. It has separate controls for volume, treble, and bass and is designed with a 2U aluminum alloy panel. MIC input can cut off the EMC input signal.

8 Channel Pre-Amplifier (Each input with treble and
bass control)
www.itctech.com.cn
T-6240
info@itc-pa.com.cn
CH 1CH 2
CH 3
CH 4CH 5CH 6CH 7CH 8 EMC INPUT
OUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUT 2
INPUTINPUTINPUTINPUTINPUTINPUTINPUTINPUT 1
~230V 50Hz 10W
T1AL 250V
Specifications
Model
Input
Output
Frequency Response
S/N Ratio
THD
Crosstalk
Muting function
Controls
Indicators
Power Supply
Power Consumption
Weight
Dimensions
T-6240
MIC: 5mV/600Ω, unbalanced line/Mic inputs
CH1-CH8: 350mV/10KΩ, unbalanced line/Mic inputs
EMC: 775mV/10KΩ, unbalanced line/Mic inputs
1V, 600Ω
Line/EMC frequency response: 20Hz~20KHz (±2dB)
Mic frequency response: 50Hz~16KHz (±2dB)
MIC: 66dB, LINE: 80dB
0.01%
MIC: 80dB, LINE: 85dB
MIC has Muting function on EMC1-2;EMC has Muting function,
automatically on CH1-CH8
LINE, MIC separate volume control, treble and bass
adjustment, channel selectors, and power switch
Power LED, MIC channel LED
~110V-230V 50/60Hz
35W
4.44Kg
484 x 335 x 88mm
Rear Panel
Description
Standard case design, 2 U aluminum alloy panel; User-friendly handle
design, beautiful and practical. 1 group MIC input, with automatic and
manual calling switch for options. In the state of automatic mode, MIC
channel can adjust the volume and tone, with top priority. In the state of
manual mode, each channel can select it by themselves which has the
priority override EMC. When 24V DC signal cut in, it will recover
automatically to corresponding inputs; 2 groups of EMC have the second
priority . When there is an emergency signal , it will switch and broadcast the
emergency signal automatically; when the emergency signal stops, it will
automatically recover to their corresponding inputs.
Features
* 8 line inputs with independent volume control.
* MIC/line has independent treble and bass volume adjustment.
* 2 EMC input can switch 8 AUX signal.
* MIC input can cut off the EMC input signal.
* 8 unbalanced line/MIC outputs.
AC power socket
Line outputs 1-8
AC fuse Mic/Line Inputs 1-8 EMC input 1-2
  • Page 1 1

ITC T-6240 Operating instructions

T-6240
ITC
Brand
ITC
Model
T-6240
Type
Operating instructions

Below you will find brief information for T-6240.This is an 8-channel pre-amplifier with individual treble and bass control for each input. It features a microphone input with automatic/manual calling switch, 8 line inputs, and 2 EMC inputs. The device allows for priority override of EMC signals and muting capabilities. It has separate controls for volume, treble, and bass and is designed with a 2U aluminum alloy panel. MIC input can cut off the EMC input signal.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents