2. Bertazzoni
  3. HK36HERFDBXV
HK36HERFDBXV

Bertazzoni HK36HERFDBXV Operating instructions

  • Hello! I've reviewed the provided document regarding the installation of handle inserts for Bertazzoni custom cabinets. The document details the use of M5 brass inserts and the recommended manual installation process to avoid panel damage. I'm ready to assist you with any specific questions you have about the installation procedure or the parts listed in the document.
  • What type of inserts are recommended for handle installation?
    What is the recommended drill bit size for the pilot hole?
    Can I use a power tool to mount the inserts?
A x4
B x4
C x1
A
B
C
3070992-revA
HANDLE INSTALLATION ON CUSTOM CABINETS
In case a custom cabinet panel is to be mounted on any of the models listed below with Bertazzoni handles,it will be necessary to install brass tapping inserts in order to
secure the handle properly on the custom panel.
SUGGESTED HANDLE INSERT FOR PANELS - M5 x 0.8 MM BRASS TAPPING INSERTS
Recommended drill bit size to drill the pilot hole is 3/8"
Suitable inserts can be ordered at www.encompassparts.com
Part Number: 95631A100, contains n°4 M5 brass hardwood inserts and 1 M5 installation bit
Do not use a power tool to mount the inserts. Installation of the inserts with improperly calibrated power tools risk damaging the panels.
/