2. Motorola
  3. Q14
Q14

Motorola Q14 User guide

  • Hello! I am an AI chatbot trained to assist you with the Motorola Q14 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the Motorola Q14?
    How do I set up the Motorola Q14?
    What is the range of the Motorola Q14?
    Can I connect wired devices to the Motorola Q14?
    How do I reset the Motorola Q14 to factory defaults?
    What is the warranty period for the Motorola Q14?
FRONT LIGHT
During power up, the light will blink for about a minute.
HELLO THERE
Set up your device with the motosync app:
motorolanetwork.com/sync
NEED HELP?
Web motorolanetwork.com/support Email support@motorolanetwork.com Phone 1-800-753-0797
LIMITED WARRANTY
MTRLC LLC warrants this product against defects in material and workmanship
for a warranty period of 2 years. To read the full warranty, please visit:
motorolanetwork.com/warranty.
SAFETY NOTICES
• Device is intended to be placed indoors in an environment that’s between
32° and 104° F (0-40° C)
• Avoid water and spills
• Leave room for airflow around the device, do not block the vents on the
top or bottom
• Marking information is located on the bottom of the product
• The power adapter plug is used as the disconnect device. The connected DC
power outlet must be located near the equipment and be easily accessible
LABEL SYMBOLS
Symbol Indicates
DC voltage
AC voltage
For indoor use only
Class II equipment
Energy ecient marking
FCC STATEMENT
This device complies with Class B Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. Additional FCC and Regulatory Compliance
information can be found at motorolanetwork.com/Q14.
© Motorola Mobility LLC 2022. MOTOROLA, the Stylized Motorola Logo, and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license. Minim is a registered trademark
of Minim, Inc. All other trademarks are the property of their respective owners. All rights reserved. Produced by MTRLC
LLC, ocial licensee for this product.
Q14
Light color + behavior Description
Solid white
Router: device is connected to the internet
Extender: device is connected to the router
Solid amber Extender has a poor connection to the router
Blinking white Device is powering up
Blinking cyan
Router: device is attempting to connect to the internet
Extender: device is attempting to connect to the router
or the router has no internet access
Rapidly blinking cyan
Updating firmware OR factory reset
Blinking blue
WPS is in discovery mode
27834-EL-A
PLACEMENT TIPSIN THIS PACKAGE Q14 BUTTONS AND PORTS
WPS button
Press to automatically connect
wireless devices, without needing to
enter the network password
WAN/LAN port
•
Router: connect the Ethernet cable
from this port to your internet device
(e.g. modem)
•
Extender: second LAN port to connect
wired devices
LAN port
Connect wired devices
Power port
Connect to the supplied power adapter
Reset button
Using a paperclip or similar object,
press for 10 seconds to reset the Q14
device to factory defaults
LET’S GET STARTED
Download the free
motosync app
for
iOS or Andriod
On your mobile phone,
download the motosync
app, available on the
Apple App Store and
Google Play.
Step 1
Step 3
Step 2
Set up your
Motorola device
Create or sign into your
motosync account
and follow the guided
instructions to set up
your
router and extenders,
if applicable.
Manage, personalize,
and secure your
home WiFi
With motosync, you can
easily run a speed test,
protect all connected
devices, set parental
controls, share WiFi with
guests, and much more!
We recommend placing your extender
midway between the router and the
desired WiFi coverage area. If you
have multiple extenders, evenly space
them throughout your home. See the
example below.
Avoid placement near
large electronics like
TVs and microwaves
Choose an elevated,
uncovered location
Q14 router
/
extender
1st device set up will be the router
Power adapter
1 per device
Ethernet cable
1 per package
Low
signal
device
Router
Add
extender
here
Low
signal
device
/