Jabra Elite 75t Wireless Charging Earbuds User manual

Category
Bluetooth music receivers
Type
User manual

This manual is also suitable for

Jabra Elite 75t Wireless Charging - Titanium
Black
How do I manually reset my Jabra Elite/Elite Active 75t to the
default settings?
When you reset your Jabra true wireless earbuds, current earbud settings
and any previous pairings with mobile devices will be cleared.
Follow these steps to reset.
1. Take the earbuds out of the charging case and ensure they are turned
on.
2. Simultaneously press and hold (approximately 10 seconds) the Right
and Left buttons until the LEDs briefly flash purple (note that the LED
on the right earbud will flash blue repeatedly before it flashes purple).
The earbuds have now been reset. The LED on the right earbud will
automatically turn blue to indicate pairing mode.
Before you re-pair your earbuds with your mobile device, remember to
delete/forget the previous pairing of the Jabra Elite/Elite Active 75t in the
Bluetooth menu. Refer to the user manual of your mobile device for
instructions.
Note
You can repeat these steps if you are unsuccessful or to verify the results.
04/10/2022 19:21
https://www.jabra.in/supportpages/jabra-elite-75t/100-99092000-40/faq/295f0953-af1b-
4efc-a4ff-f4ad2174c2f4
Page 1 of 1
  • Page 1 1

Jabra Elite 75t Wireless Charging Earbuds User manual

Category
Bluetooth music receivers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI