Jabra Elite 75t User guide

Jabra Elite 75t - Black

How do I manually reset my Jabra Elite/Elite Active 75t to the

default settings?

When you reset your Jabra true wireless earbuds, current earbud settings

and any previous pairings with mobile devices will be cleared.

Follow these steps to reset.

1. Take the earbuds out of the charging case and ensure they are turned

on.

2. Simultaneously press and hold (approximately 10 seconds) the Right

and Left buttons until the LEDs briefly flash purple (note that the LED

on the right earbud will flash blue repeatedly before it flashes purple).

The earbuds have now been reset. The LED on the right earbud will

automatically turn blue to indicate pairing mode.

Before you re-pair your earbuds with your mobile device, remember to

delete/forget the previous pairing of the Jabra Elite/Elite Active 75t in the

Bluetooth menu. Refer to the user manual of your mobile device for

instructions.

Note

You can repeat these steps if you are unsuccessful or to verify the results.

15/10/2022 08:05

https://www.jabra.com.au/supportpages/jabra-elite-75t/100-99090001-40/faq/295f0953-

af1b-4efc-a4ff-f4ad2174c2f4

Page 1 of 1

Download PDF