Sennheiser E840-E840S Dynamic Microphone Operating instructions

Sennheiser
Brand
Sennheiser
Model
E840-E840S Dynamic Microphone
Category
Microphones
Type
Operating instructions
Bedienungsanleitung
Instructions for use
Notice d‘emploi
Istruzioni per l‘uso
Instrucciones para el uso
Gebruiksaanwijzing
840 840 S
e 840_511659_0106_Sp6.book Seite 1 Mittwoch, 8. Februar 2006 10:43 10
Deutsch
English
Français
Italian
Español
Nederlands
e 840_511659_0106_Sp6.book Seite 183 Mittwoch, 8. Februar 2006 10:43 10
3
840 / 840 S
The 840 has been engineered for the vocalist that
needs the vocals to cut through the band. Due to its
excellent acoustic properties, the 840 delivers a high
signal output to cut through high on-stage sound levels
with ease. A gentle presence boost to even tonal
response ensures vocal clarity and projection.
The balanced frequency response maintains signal
quality when moving on and off axis during performance.
The minimal proximity effect provides for consistently
clear bass-end performance when singing closer to, or
further from the microphone.
The cardioid pick-up pattern provides excellent feedback
rejection and good isolation from incidental rear noise.
The rugged metal construction and internal damping
isolates handling noise.
The 840 S variant features a silent
ON/OFF switch
.
e 840_511659_0106_Sp6.book Seite 3 Mittwoch, 8. Februar 2006 10:43 10
4
Features
yRugged metal body
yShock-mounted capsule
yFrequency-independent directivity
yExceptional feedback rejection
yExcellent vocal projection
yHumbucking coil
Delivery includes
y840 / 840 S microphone
yMZQ 800 microphone clamp
yPouch
yInstructions for use
yWarranty Certificate
ON/OFF switch ( 840 S only)
Use the screw to lock the switch in the ON position. With
the switch set in the ON position, gently turn the screw
head 90° to lock the switch in position.
e 840_511659_0106_Sp6.book Seite 4 Mittwoch, 8. Februar 2006 10:43 10
5
Pin assignment of XLR-3 connector
Removing the sound inlet basket
12 3
12
3
++
12
3
XLR 6,3 mm
+
+
12 3
XLR
+
XLR
12
3
6,3 mm
+
+
symmetrisch
XLR
XLR
+
balanced
e 840_511659_0106_Sp6.book Seite 5 Mittwoch, 8. Februar 2006 10:43 10
6
Positioning the microphone
If sibilance or “popping” occurs, position the microphone
not directly in front of the mouth but slightly to the side.
In order to prevent feedback, position monitor loud-
speakers so that they are located in the angle area of the
highest cancellation of the microphone.
In order to prevent interference due to crosstalk between
adjacent sound sources, try to position the microphone
so that the interfering sound source is located in the
angle area of the highest cancellation of the microphone
(approx. 150°; see polar diagram).
Position Resulting sound Commentary
High proximity effect
(much bass/
fundamental)
Powerful, direct sound
Very little crosstalk
from other sound
sources
Less proximity effect
(less bass/fundamental)
Some room ambience,
natural, balanced sound
More crosstalk from
other sound sources
Very little proximity
effect (little bass/
fundamental)
More room ambience,
indirect sound
Much crosstalk from
other sound sources
e 840_511659_0106_Sp6.book Seite 6 Mittwoch, 8. Februar 2006 10:43 10
7
Polar diagram
Frequency response curve
°
5
1
0
1
5
20
2
5
dB
30
°
60
°
°
30
°
60
°
°
12
0
°
1
50
°
1
80
°
1
50
°
12
0
°
2
000
H
z
4
000
H
z
8000
H
z
1
6000
H
z
12
5
H
z
2
50
H
z
500
H
z
1
000
Hz
-
50
-
60
- 7
0
-
80
-
90
2
0
50
1
00
2
00
500
1
000
2
000
5000
1
0000
2
0000
Hz
0
°
,
1
m
- 4
0
d
B
v
e 840_511659_0106_Sp6.book Seite 7 Mittwoch, 8. Februar 2006 10:43 10
8
Specifications
Transducer principle dynamic
Frequency response 40.....18,000 Hz
Pick-up pattern cardioid
Sensitivity
(free field, no load at 1 kHz) 2 mV/Pa ± 3 dB
Nominal impedance 350 Ω
Min. terminating impedance 1 kΩ
Connector XLR-3
Weight 330 g
Dimensions Ø 47 x L 181 mm
e 840_511659_0106_Sp6.book Seite 8 Mittwoch, 8. Februar 2006 10:43 10
9
Overview of microphone applications
Variant
Application
e602
e604
e606
e608
e614
e815
e825
e835
e840
e845
e865
Vocals xxxxxx
Choirs x
Studio,
acoustic instruments
x
Orchestra x
Brass / Saxophone xx x
Acoustic guitar x
Acoustic bass x
Guitar amplifiers x
Bass amplifiers x
Leslie xxx
Piano, grand piano x
Kick drums x
Snare drums xxx
Rack toms xxx
Floor toms xxx
Congas xxx
Cymbals x
Percussion xxxx
Overheads x
e 840_511659_0106_Sp6.book Seite 9 Mittwoch, 8. Februar 2006 10:43 10
10
Manufacturer declarations
Approval
Sennheiser electronic GmbH & Co. KG declare that this device
is in compliance with the applicable CE standards and regula-
tions.
Batteries or rechargeable batteries
Please dispose of batteries or rechargeable batteries as special
waste or return them to your specialist dealer.
WEEE Declaration
Please dispose of this product at the end of its operational li-
fetime by bringing it to your local collection point or recycling
centre for such equipment.
e 840_511659_0106_Sp6.book Seite 10 Mittwoch, 8. Februar 2006 10:43 10
Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany
Phone +49 (5130) 600 0
Fax +49 (5130) 600 300
www.sennheiser.com
Printed in Germany Publ. 01/06 511659/A02
e 840_511659_0106_Sp6.book Seite 52 Mittwoch, 8. Februar 2006 10:43 10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Sennheiser E840-E840S Dynamic Microphone Operating instructions

Sennheiser
Brand
Sennheiser
Model
E840-E840S Dynamic Microphone
Category
Microphones
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents