Active Ventilation Products VPC-7 User manual

Type
User manual

This manual is also suitable for

3 1/8"
[7.94 cm]
5"
[12.70 cm]
1 1/4"
[3.18 cm]
10 1/4"
[26.03 cm]
7 1/4"
[18.41 cm]
Flashing Detail & InstructionsFlashing Detail & Instructions
Exhaust Pipe
FastenerFastener
Active Ventilation Products, Inc.
Website: roofvents.com Email: [email protected]
Installation Instructions
Vent Pipe Cap Model: VPC-7 Diameter: 7"
3/24/2022
1. Slide the Vent Pipe Cap over the existing pipe.
2. Observe the screws located on top of the vent. Use this
as a pattern to attach the vent to the pipe.
3. To secure the vent, attach the vent to the pipe using a
#8 self-tapping sheet metal screw.
4. Total number of screws needed = 3
5. Recommended installation screw:
#8 x 1/2" Sheet Metal Screw
6. Screws not included.
* All Aluminum Construction, Thickness = 0.025" [0.635 mm]
  • Page 1 1

Active Ventilation Products VPC-7 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI