Buffalo AFCHAIR Owner's manual

Type
Owner's manual

Buffalo AFCHAIR is a sturdy and versatile folding chair designed for both indoor and outdoor use. With a maximum weight capacity of 300 pounds, it offers a stable seating option for people of all sizes. The chair's durable construction and easy-to-follow assembly instructions make it a great choice for anyone looking for a reliable and portable seating solution. Whether you're using it for camping, picnics, or simply relaxing in your backyard, the Buffalo AFCHAIR is sure to provide years of comfortable use.

Buffalo AFCHAIR is a sturdy and versatile folding chair designed for both indoor and outdoor use. With a maximum weight capacity of 300 pounds, it offers a stable seating option for people of all sizes. The chair's durable construction and easy-to-follow assembly instructions make it a great choice for anyone looking for a reliable and portable seating solution. Whether you're using it for camping, picnics, or simply relaxing in your backyard, the Buffalo AFCHAIR is sure to provide years of comfortable use.

AFCHAIR
Adirondack Folding Chair
Assembly Instructions
Max Weight Capacity 300 Lb
!
!
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time, or email : info@amerihomebrand.com. A copy of the sales receipt is required.
KEEP MANUAL, SALES RECEIPT & WARRANTY FOR FUTURE REFERENCE!
HARDWARE
!
!
!
(E) Carriage Bolt 6 pcs
(A) Lag Bolt 4 pcs
(B) Square Driver Screw 4 pcs
(NOTE: The slant on arm rest is
positioned to the outside of the chair.)
(C) Locking Nut 6 pcs
(D) Washer 6 pcs
C. On the outside of the chair, secure Carriage
Bolt (E) with Washer (D) and Locking Nut (C)
with 11mm or 7/16 socket.
**NOTE: Washer (D) and Locking Nut (C) are to be used with
Carriage Bolt (E). Washer (D) and Locking Nut (C) will be on
opposite side of the wood as the head of the Carriage Bolt (E).
1
. Attach front legs and arm rest to chair back
A. You will need 2 Carriage Bolts (E), 2 Washers (D),
and 2 Locking Nuts (C).
A. B. Place leg on the inside of the arm rest. Run the
Carriage Bolt (E) from inside to the outside of the chair
through leg and arm rest.
TOOLS YOU WILL NEED
11mm or 7/16 socket
R-2 Square Bit
Seat
Hinge Block
Front Chair Support
Front Legs
D. Secure back of arm rest using 1 Lag
Bolt (A) and 11mm or 7/16 socket.
2
. Attach back of chair and seat of chair.
A. You need 2 Lag Bolts (A), 2 Carriage Bolts (E),
2 Washers (D), and 2 Locking Nuts (C).
B. Slide the box the product was shipped in under
the chair back. Allow front legs to support the
chair. Slide seat between the chair legs.
E. Repeat Steps B through D on the opposite side.
F. At this point, the product should resemble this photo.
Box
Chair Seat
Carriage
Bolt
Lag Bolt
Chair Back Support
C. Line up Hinge Block and attach using
Lag Bolt (A) on the chair back support and
Carriage Bolt (E) on seat. Be sure the
tapered edges of the Hinge Block are
positioned on the outside.
Tapered
Edge of
Hinge
Block
Attach Front Chair Support with
(B) Square Drive Screws
(B)
8 ½
From
Ground
3.
Attach Front Chair Support.
A. You will need front support stop and
4 pcs of Square Drive Screws (B).
B. Adjust front support stop to desired height
(Usually around 8 ½ from the floor)
C. Fasten front support stop to the front legs using
square drive screws (B) and R-2 bit.
!
G. Be sure to rotate the Hinge Block once the
Block is attached on both sides. Once rotated,
tighten all bolts using an 11mm or 7/16 socket.
D. Secure Lag Bolt (A) with Washer (D) and
Locking Nut (C) using 11mm or 7/16
socket.
D. Repeat steps 2a-d on opposite side
H. After rotating Hinge Block, product
should be in position as shown.
F. Rotate
towards bottom
of seat while
pulling the back
of seat back.
E. Pull the chair back
the opposite direction
of hinge block.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Buffalo AFCHAIR Owner's manual

Type
Owner's manual

Buffalo AFCHAIR is a sturdy and versatile folding chair designed for both indoor and outdoor use. With a maximum weight capacity of 300 pounds, it offers a stable seating option for people of all sizes. The chair's durable construction and easy-to-follow assembly instructions make it a great choice for anyone looking for a reliable and portable seating solution. Whether you're using it for camping, picnics, or simply relaxing in your backyard, the Buffalo AFCHAIR is sure to provide years of comfortable use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI