The Balance 695159 is a multifunctional weather station that provides accurate indoor and outdoor temperature and humidity readings, as well as barometric pressure and weather forecasting. It features a large, easy-to-read LCD display with various weather icons, moon phase, air pressure history, and comfort level indicators. The device also includes an alarm with snooze function, dual time zones, and a calendar with weekday display in multiple languages.
The Balance 695159 is a multifunctional weather station that provides accurate indoor and outdoor temperature and humidity readings, as well as barometric pressure and weather forecasting. It features a large, easy-to-read LCD display with various weather icons, moon phase, air pressure history, and comfort level indicators. The device also includes an alarm with snooze function, dual time zones, and a calendar with weekday display in multiple languages.
695159 Instruction Manual
Function Description ( Receiver )
Automatic and manual receive the radio signal (DCF)
Max/Min display for indoor / outdoor temperature and humidity
Time Zone select:-12~+12 Hour differences
Dual time zone selection
Continuous calendar up to year 2099
Calendar display ( Date / Month / weekday )
Auto adjust to Winter / Summer time ( DST)
Moon of phase
/ selection
Indoor temperature trend displays
Low-battery indication for wireless remote sensor
Air press trend indication display
12HR air pressure history
12/24 hour format selectable
Alarm and Snooze
Backlight for 5 seconds
5 weather icons: sunny/party sunny/cloudy/rainy/storm rain
3 comfort icons display ( DRY / COMFORT / WET )
Weekday display in 7 languages ( English-German-French-Italian-Dutch-Spanish-Danish )
Outdoor temperature measuring range -50~+70
Indoor temperature measuring range 0~+50
Outdoor / indoor humidity measuring range : 20-95%RH
Receiver (Clock ) can receive 3 wireless remote sensors ( channel 1/2/3 )
Battery: DC 1.5V AA size X 3 PCS
Wireless Remoter Sensor ( Transmitter )
Transmitter frequency :433 MHz
3 channels by option
Range of transmitter is up to 30m
Battery : DC 1.5V AAA size X 2 PCS
Receiver Unit Appearance:
Front View
Front View
Part A-LCD
A1: Max-Min memory A2: Indoor temperature and humidity
A3: Channel A4: Outdoor temperature and humidity
A5: RF icon A6: Transmitter Low battery power display
A7: Alarm icon A8: Dual time ( DCF )
A9: Calendar A10: Radio controlled time
A11: Radio controlled icon A12: 12HR air pressure history
A13 Moon of phase A14: Barometric air pressure
A15: comfort icons A16: Air pressure trend indication
A17: Weather forecast icon
Part B-Buttons
B1: “ DOWN –WAVE ” button B2: “- ( UP / MEM )” button
B3: “ CHANNEL “ button B4: “ SNOOZE / LIGHT ” button
B5: “ALM-SET” button B6: “ SET ” button
B7: “ RESET ” button
Part C-Structure
C1: Insert DC adapter jack C2: Stand
C3: Battery door C4: Wall mount hole
Wireless Remote Sensor Appearance:
Back View
Front
View
Back View Back View
Top View
Front View
Part D-LCD
D1: Outdoor temperature / humidity display D2: RF icon
D3: Low battery display D4: Channel
Part E- Buttons
E1: “ Reset “ button E2: “Channel select switch “ button
E3: “/” button
Part F-Structure
F1: Transmitter Lens F2: Transmitter indication LED
F3: Gases hole F4: Wall mount hole
F5: Battery door F6: Battery compartment
Manual Time Setting :
The setting sequence is shown as follow: Year-Month-Date- Time Zone - 24 HR -Hour-Minute-Weekday Languages
In time mode, press and hold down the ” SET(B6) ” button for 3 seconds, the year display 2011 starts to flash,
now use ”+(B1) or ”-(B2)” buttons to set the correct year.
Press” B6” to confirm your setting, the month display starts to flash, Now use “+(B2)” or “–(B1)“ buttons to set
the correct month.
Press ” B6 ” to confirm your setting, the date display starts to flash, Now use “+(B2)” or “–(B1)“ buttons to set the
correct date.
Press “B6” to confirm your setting, the “00” display starts to flash. Now use “+(B2)” or “–(B1)“ buttons to set correct
time zone.
Press “B6” to confirm your setting, the12/24 HR display starts to flash. Now use “+(B2) ”or “–(B1)“ buttons to set
correct time format.
Press “B6” to confirm your setting, the hour display starts to flash. Now use “+(B2)” or “–(B1)“ buttons to set
correct hour.
Press “B6” to confirm your setting, the minute display starts to flash. Now use “+(B2)” or “–(B1)“ buttons to set
correct minute.
Press “B6” to confirm your setting ,the language selection for the weekday displays states to flash, Now use
“+(B2)” or “–(B1)“ buttons to select a language..
Press “B6” to confirm your setting and to end the setting procedures.
After 10 seconds without pressing any button the receiver switches automatically from setting mode to Normal
clock mode.
Setting The Daily Alarms :
In time mode, press ”ALM SET (B5)” button one time, and the “
”icon appears, again press and hold down the
“B2” button for 3 seconds until “AL” hour icon starts to flash, now use ”+(B2)” or "-(B1) “ buttons to set your want
time, and press “B5” to confirm your setting, ” AL “ minute display start to flash, press ”+(B2)” or “–(B1)” buttons to
set you want time. And press “B5” to confirm your setting.
If you want cancel the alarm, please change the alarm mode and press “B5 “ button one time to cancel the alarm,
and the “
”icon disappears .
To Use Snooze Alarm:
When time reaches your set alarm time ,your clock will give beep sound to wake up, the “
”icon will flash..
Press” SNOOZE/LIGHT(B4) ” button once to stop the alarm temporarily, the “
” icon keeps flashing ,the alarm
will beep again in 5 minutes.
To stop the alarm , press anything button once ,the alarm beep will stop and the “ ” icon become static ,alarm will
beep again same time next day.
Alarm Duration : 2 minutes.
Snooze Duration: 5 minutes
Reception Of The Radio Signal :
When you insert the batteries, all the icons on the LCD display will briefly up for 3 seconds, and you will hear a
beep tone.
The Receiver (clock ) will now start to make a connection to the wireless remote sensor, this operation takes
about 3 minutes and is displayed by flashing reception RF symbol “
“ on the LCD display .
After receiver has created a connection to the wireless remote sensor ( after 3 minutes ), it will then begin the
automatic reception of the DCF radio signal , this operation takes up to 7 minutes and is display by flashing radio
mast symbol “ ” on the LCD display.
If reception is successful, then the radio controlled icon ”
“ will appear continuously on the LCD display.
The Receive automatically must scan the DCF signal at 1:00 a.m.2:00 a.m.3:00 a.m .everyday, if it receiver DCF
signal at 3:00 a.m. it will stop receiving until 1:00 a.m. next day .but if it fail reception at 3:00 a.m,it will repeat again
at 4:00 a.m.5:00 a.m. This procedure is repeated automatically up to 5 times.
If this automatic process is unsuccessful, then use a sharp object to press the “ RESET (B6) “button on the
Receiver.
Remarks :
A flashing radio mast symbol indicates that the DCF signal reception has started.
A continuously displayed radio mast symbol indicates that the DCF was received successfully.
We recommend a minimum distance of 2.5 meters (8.2 Feet) to all sources of interference such as televisions or
computer monitors.
Radio reception is weaker in rooms with concrete walls (e.g. in cellars) and in offices. In extreme cases, place the
system at a window.
As there is less atmospheric interference at night, radio reception is normally possible at this time. A single
synchronization each day is sufficient to keep the time display accurate to one second.
Manual Receive Signal :
To start DCF reception manually, press ” WAVE (B1) ” button for 2 seconds, The radio controlled icon “
” starts to
flash. if reception is successful the radio controlled icon ” “on the LCD display. If you want to stop DCF
reception , press and hold down “ WAVE (B1) ” for 2 seconds. If no signal is received within seven minutes, then
the DCF signal search stops ( the radio controlled icon “
” disappears ) and starts again the next full hour .
DCF Signal Reception And Signal Indicator
Weak or no DCF signal ( only
icon flashing)
Receiving strong DCF signal ( icon flashing )
Successful Reception (
icon becomes static)
Failed Reception (
icon disappear)
Remark: when your clock is receiving radio controlled time signal ,all buttons except the snooze/light button do not
function.
/ Temperature Display
The temperature is displayed either in ,briefly pressing the “DOWN (B1)“ button allows you to switch between
individual mode.
Moon Phase and Tide Indication
Moon phase will be displayed automatically according to current calendar. There are 8 different moon
Phases (Moon phase iconWaning crescent; New moon; Waxing crescent; Waxing gibbous; First quarter; Waning
gibbous; Full moon; Last quarter) ranging from New Moon to full Moon. Moonphase display is controlled by the
current calendar.
WET / COMFORT / DRY Icons
DRY Humidity below 40%
COMFORT Temperature 20-28 ( 68-82 ) ,humidity in 40-70% range
WET Humidity over 70%
NO Display When temperature isn’t in 20-28 range , Humidity in 40-70% range
Weather Forecaster Icon And Pressure Trend Indicator
The Receiver (Clock ) has a built-in barometric sensor which measures the change of the air pressure over time ,it
takes around 24 hour go gather and average air-pressure reading to provide a weather forecast for next 12-24
hour.
Weather Forecast Icons :
There are four possible types of weather icons that will be displayed
SUNNY PARTLY SUNNY CLOUDY RAIN RAINSTORM
Air Pressure Tendency Indicators
When the arrow upward appears , the air pressure is increasing , the weather is expected to improve
When the arrow downward appears , the air pressure is decreasing , the weather is expected to become worse
When the arrow horizontal appears , the air pressure change is stable
Air Pressure History Bar Chart
The bar chart indicates the air pressure history trend over the last 12 hours in 6 steps :0h,-1h,-2h,-3h,-6h and -12h
The “oh” represent the current full hour air pressure recording
The columns represent the “hPa” at specific time
If the bars are raising it means that the weather is getting better due to the increase of air pressure
If the bars go down , it means the air pressure has dropped and the weather is expected to get worse from the
present time “0h”
Remarks :
Moving your weather from one floor of a building to another floor will affect the accuracy of your Receiver, which
should operate at the same altitude all the time , if you move it to a new location , it will take 12-24 hour to get
stable and accurate again.
As you go higher in the air , the atmospheric pressure decreases, the exact pressure at a particular altitude
depends of weather conditions , but a couple of approximations and a formula can give you a general idea of how
pressure decreases with altitude, a rule of thumb for the altimeter correction is that the pressure drops about 1
hPa for each 8 meters of altitude gain , these rules work quite well for elevations or altitudes of less than two or
three thousand feet.
Our Receiver provides next 12-24 hours weather forecast , it may not match with the current weather condition
outside.
TO Read Maximum-Minimum Indoor /Outdoor Temperature And Humidity:
Press the ” UP/MEM (B2) ” button to show the maximum indoor /outdoor temperature and humidity with “MAX”
icons appearing on the display.
Press the “ UP/MEM (B2)”button again to show the maximum indoor / outdoor temperature and humidity with
“MIN” icons appearing on the display.
In “MAX/MIN” mode ,hold ” UP/MEM ( B2) ” button for 3 seconds to clear the recorder max/min reading.
Press ” DOWM (B1) ” button to select indoor/outdoor temperature in Celsius( )mode or Fahrenheit ( )
mode.
Display Outdoor Temperature :
Press “ CHANNEL(B5)” button to show the 3 channel temperature, the sequence is shown as follow:
If only one sensor is registered , press “ CHANNEL (B3) “ button will has no function
Hold “CHANNEL(B3)” button for 3 seconds to cancel unused channel manually, it will automatically search
and register a new channel again if a new channel is received , if there no temperature display in existing
channel (“--- ---“ is display on the LCD), hold “ CHANNEL (B3)” button for 3 seconds to cancel that channel
and receive the channel again.
Wireless Remote Sensor Registration Procedure :
The wireless remote sensor will automatically transmit temperature to the receive (clock ) after batteries
inserted .
For having more than one external transmitter ,select the channel (CH1-CH2-CH3) to ensure each wireless
remote sensor is transmitting different channel before inserting batteries, the channel selecting switch (E2)
button is at the back of the wireless remoter sensor.
Press “/ “ (E3) button on the wireless remote sensor , to select displayed in Celsius mode or
Fahrenheit mode
Press
“
CHANNEL
”
(B3
)
Press
“CHANNEL”(B3)
Press
“CHANNEL”(B3)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
The Balance 695159 is a multifunctional weather station that provides accurate indoor and outdoor temperature and humidity readings, as well as barometric pressure and weather forecasting. It features a large, easy-to-read LCD display with various weather icons, moon phase, air pressure history, and comfort level indicators. The device also includes an alarm with snooze function, dual time zones, and a calendar with weekday display in multiple languages.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Technoline Model User manual
-
-
SkyScan 81690 User Instructions
-
Technoline WS 8001 User manual
-
Sencor SWS 165 User manual
-
TFA 98.1019 User manual
-
Conrad TE 857 Operating instructions
-
Irox HBR623I Owner's manual
-
-
National Geographic Weather Expert Owner's manual
