Electrical Group Eaton Industries Pty Ltd
ABN 66 103 014 571
10 Kent Road
Mascot, NSW Australia 2020
www.eaton.com/powerquality
1300 UPS UPS (1300 877 877)
© 2013 Eaton, All Rights Reserved Enclosure Baying Kit Page 1 of 2
Enclosure Baying Kit
Use Baying Kit to join two or more Racks together.
Features
Bays two or more racks together
Bays at front and rear frame
Lines up the rack
Improves rack stability
RoHS compliant
Conforms to ASTM D160-01 and ASTM B117 (500 hours salt spray test)
Material / Finish
High grade cold rolled steel 2.00 mm thickness
Powder coat finish preceded by 5 stage iron phosphate pre-treatment
Standard colour is low gloss black.
Part List
1. Baying Bracket
2. Screws
Part Number
Part Description
ERA010
Enclosure Baying Kit (set of 4)
© 2013 Eaton, All Rights Reserved Enclosure Baying Kit Page 2 of 2
Dimensions (in mm.)
Installation
1. Level racks so that baying bracket holes are aligned.
2. Using T-3 Torque wrench or screw driver, fit the screw as shown.
3. Repeat for all four brackets.
Note: Torque 25-30 inch lbs
/