2. Standard Horizon
  3. QUANTUM GX2360S

Standard Horizon QUANTUM GX2360S, GX2360SQRG final Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Standard Horizon QUANTUM GX2360S Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I activate the distress signal?
    What is the purpose of the squelch function?
    How do I select a channel?
    How do I switch between channel 16 and channel 9?
    How do I activate NOAA weather channels?
    How do I program channels into memory for scanning?
    How do I lock the front panel keys and rotary knob?
    How do I activate the public address (PA) function?
    How do I select the DSC call functions?
    How should I position the microphone for optimal voice transmission?
QUICK REFERENCE
1
)
DSC DISTRESS (MMSI must be programmed)
a. LIFT DISTRESS COVER
b. PRESS ROUND DISTRESS KEY
c. PRESS AND HOLD DISTRESS KEY UNTIL ALARM SOUNDS.
2
)
VOLUME/POWER
a. Press and hold to turn power on or off.
b. Turn to adjust speaker volume when SQL off.
3
)
SQUELCH
Adjust to the point where random noise stops from the speaker.
Further adjustment will cause a loss in reception of wanted signals.
4
)
ROTARY CHANNEL KNOB
a. Used to select channels.
b. When in PA mode adjusts PA volume.
5
)
Channel 16/9
Press once to select CH16. For CH9 press and hold.
6
)
WX “NOAA WEATHER”
Press
[
WX
]
key to select NOAA weather channels.
For weather alert, select channel into scan memory.
7
)
A/B
a. To program press and hold
[
A/B
]
key and turn rotary knob to desired channel,
release
[
A/B
]
key. Repeat this procedure for other channel.
b. After step a. is performed, the
[
A/B
]
key will select the two programmed channels
and the last selected channel.
8
)
DW
(
IC
)
a. Select a channel to be dual watched to CH16 and press the
[
DW
]
key.
b. When connected to optional RAM mic, press and hold to select the intercom
function between Radio and the RAM mic.
9
)
H/L
(
NAV
)
a. Switches transmitter power from 1 to 25 watt output.
b. When connected to GPS, press and hold to show the NAV GPS Data, Time,
vessel’s SOG (Speed Over Ground), and COG (Course Over Ground).
10
)
SCAN
a. Starts and stops scanning on the programmed channels.
b. To show channels in scan memory hold
[
SCAN
]
key and turn rotary knob.
11
)
MEM
a. Add/remove channels into/from memory for scanning, select channel with rotary
knob, then press the
[
MEM
]
key. “MEM” will appear on LCD. Press the
[
MEM
]
key again to remove the channel from memory. “MEM” will disappear from LCD.
b. Press and hold to lock out the front panel keys and rotary knob.
Press and hold again to unlock the front panel keys and rotary knob.
12
)
PA/FOG
a. First press selects PA. Volume is adjusted with rotary knob.
Listen back volume is adjusted with VOL control.
b. Second press selects menu for FOG1 thru FOG4, HORN, SIREN, AGROUND,
and ANCHOR.
13
)
CALL/SET
(
MENU
)
a. Press to select DSC call functions. Individual Directory and All Ships Call.
b. Press and hold to select Radio Setup Menu or DSC Setup Menu.
14
)
CLEAR VOICE NOISE CANCELING MIC
Speak 1 inch away from the hole in the top front of mic.
QU ANTUM
/