woodsam
T H E P R E M I U M L E D B O A R D P R O V I D E R
Instruction Manual
Facebook.com/woodsamcom
Features
Unlike with the use of chalkboards or white boards,
letters and drawings are self-illuminated with the
LED Board. No need for an external source of light
Works well in both day or night; especially eye-
catching and fantastic in a dark environment
Energy efficient and environmentally friendly with
symmetrical lighting effect
An amazing and unique way to catch the attention of
friends, family, guests and potential customers
Display it on storefront windows, lobbies or host
stands! Also great for use in places such as
restaurants, bars, hotels, stores, stations,
supermarkets, parking lots, home, companies,
schools, churches, etc.
The LED Board is reusable! This means that you can
repeatedly advertise/promote/draw various goals
over time. Just clean it off with the included wiping
cloth or any drying cloth and then draw again
Verify the package contents for the following
accessories:
- AC Power Adapter
- USB Receiver
- Remote
- Hanging Chain
- Wiping Cloth
- Woodsam Liquid Chalk Markers (Optional)
Connect the USB receiver to the small cable port on
the LED Board. Then connect the AC power adapter to
its socket and plug it into an outlet
If desired, use the hanging chain to hang the board in
both a horizontal or vertical fashion. Located behind
the board are two metal loops for the hanging chain
Use the remote, and point it directly to the receiver,
when you wish to cycle through its various flashing
modes
Shake the liquid chalk markers before use and start
writing on the board! Wiping cloth can be used both wet
or dry
Installation
Turns up the brightness
Turns down the brightness
Flash Mode - 7 colors flash function
Strobe Mode - bursts of light
Fade Mode - gradual light
Smooth Mode - 0.5 second flash on
and off
Illustration
Remote
For first time use,
place the marker
tip upwards and
slightly press the
tip to release
pressure
With the cap on,
shake the marker
well and remove
the cap while
upright
Press the tip for 10-
30 seconds until it
fills with ink. Recap
tightly after use and
store in a horizontal
position
Liquid Chalk Marker Usage Security
Attentions
Avoid rough, direct contact
with the corners of the
board to prevent damage
To avoid possible internal
damage, avoid cleaning
with direct water
Do not attempt to fix the
power cord if it is damaged;
Plan for a replacement from
Woodsam instead
Do not place heavy objects on
top of the board to avoid any
cracks or other types of
damage
If the LEDs fail to light up, double check to see
if the red light is showing on the AC power
adapter. If not, verify that the outlet is working
If the remote does not seem to be working,
check to make sure that the remote is pointed
DIRECTLY to the receiver
Do Not connect any of the USB accessories into a
computer or any other non-compatible
electronic device
Avoid long-time sun, rain or water
exposure
Do not overuse any chemical substances
to clean the board
Avoid contact with hard objects on writing
area to prevent scratches
Do not attempt to open the board, AC
power adapter or remote
Safety Tips
FAQ
Display Method
Note: Stand is optional, may not included in the package
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
VTech DigiArt User manual
-
PyleHome PLWB6090 Owner's manual
-
Sea Ray 2007 55 SUNDANCER Owner's manual
-
-
Crayola Qwikflip Glow Easel User manual
-
Four winns Horizon Owner's manual
-
-
WARRIOR V1890 Owner's manual
-
-
