Auscrown CK801NG Installation & Operating Instructions Manual

Brand: Auscrown

Model: CK801NG

Category: Barbecues & grills

Type: Installation & Operating Instructions Manual

This manual is also suitable for

Auscrown CK801NG is a single burner wok cooker designed for use with natural gas. It features an electronic ignition system for easy and safe lighting, and high-energy, high-efficiency burners that reduce gas consumption. The removable control knob incorporates the burner ignition, and a large trivet provides greater cooking flexibility. The stainless steel top and control panel are easy to clean, and the unit is suitable for use with all types of cooking, from simmering to stir-frying.

Here are some possible use cases for the Auscrown CK801NG:

Quick and easy weeknight meals: The high-powered burner can quickly heat food, making it ideal for cooking stir-fries, pasta dishes, and other quick meals.

Here are some possible use cases for the Auscrown CK801NG:

Quick and easy weeknight meals: The high-powered burner can quickly heat food, making it ideal for cooking stir-fries, pasta dishes, and other quick meals.

Wok Burner Cooker Installation & Operating Instructions

INSTALLATION & OPERATING INSTRUCTIONS

WOK BURNER COOKERS

FOR INSTALLATION AND USE INDOORS ONLY

- NOT FOR PORTABLE USE -

AGA APPROVAL NO.: 7092G

Rambo®

Models for use with Natural Gas:

RB18NG - Single Burner Wok Cooker

RB28NG - Double Burner Wok Cooker CK801NG – Single Burner Wok Cooker

CK802NG – Double Burner Wok Cooker

Models for use with Propane Gas:

CK801PG – Single Burner Wok Cooker

CK802PG – Double Burner Wok Cooker

FEATURES

 Electronic ignition system incorporating piezo-electric elements.

 Wok burner suitable for all types of cooking from simmering to stir-frying.

 High-energy, high-efficiency burner reduces gas consumption.

 Removable control knob incorporating burner ignition.

 Large trivet for greater cooking flexibility.

 Easy to clean stainless steel top and control panel.

IMPORTANT

 The appliance must be installed only by an authorised person such as a licensed gas fitter or plumber.

 Read this manual carefully and retain for future reference.

THE APPLIANCE MUST BE INSTALLED IN COMPLIANCE WITH THE FOLLOWING:

 AS5601 – Australian Standard for Gas Installations;

 Manufacturer’s installation instructions;

 Local gas fitting regulations;

 Municipal building codes; and

 Any other relevant statutory regulation(s).

GAS PRESSURE REGULATOR DETAILS

 FOR NG MODELS

A natural gas regulator is included with the appliance – Maxitrol RV20LM, AGA Approval No. 3088

 FOR PG MODELS

A gas regulator and hose assembly is included with the appliance.

THE CORRECT FITTINGS MUST BE USED AT ALL TIMES - DO NOT USE ADAPTORS

Important: Read these instructions carefully before use. Familiarize yourself with the appliance

before connecting it to its gas supply. Keep these instructions for future reference.

SAFETY WARNINGS

 This appliance must be used in a well ventilated area only

 DO NOT USE IN MARINE CRAFT, CARAVAN OR MOBILE HOMES.

 Failure to follow instructions in this manual could result in physical injury and/or property

damage.

 Hazardous fire or explosion may result if instructions are ignored

 Leak-test all connections before use

 Never check for leaks with a match or open flame

 Do not store or use petroleum products or other flammable vapours and liquids in the vicinity of

this appliance

 Do not use or store flammable materials in the appliance storage drawer or near this appliance.

 Carbon monoxide hazard – this appliance can produce carbon monoxide which has no odour.

Using the appliance in an enclosed space may cause death. This appliance is not for

installation inside a caravan, tent, car, mobile home.

 Do not spray aerosols in the vicinity of this appliance while it is in operation.

 Do not use this appliance as a space heater under any circumstance.

 Any LP cylinder not connected for use with this appliance shall not be stored near this

appliance.

 This cooker is suitable for use with the specified gas type only. The cooker is only to be

connected to the gas type specified on the label/data plate.

 Do not modify this appliance or changed in any way.

 Do not use this cooker where petroleum products or other liquids having flammable vapours

are stored or used.

 Children and adults should be alerted to the high temperatures of the cooker and its effect on

surrounding surfaces, clothing and skin

 Children or the elderly should be supervised when near this appliance

 Do not hang clothing or other flammable material on or near this appliance

 Do not cover or blow out the flames. This could cause gas leaking.

 Always keep flammable materials away from the cooker.

 Do not store things close to the cooker.

 Install and use the cooker in a well-ventilated area.

 Make sure that you use cooking woks, pots or pans that sit firmly on the trivet. Do not use pots

that are too small/large for the burner size, as they could be unstable on the trivet.

 If abnormal combustion is observed when in use, turn off the main gas valve and examine the

cooker (refer to trouble-shooting guide)

 A SPIDER’S WEB CAN INTERFERE WITH THE FLOW OF GAS / AIR INTO THE BURNER, THE

OPENING INTO THE BURNER DIRECTLY IN FRONT OF THE GAS VALVE SHOULD BE CHECKED

REGULARLY AND CLEARED WITH A PIPE CLEANER OR SIMILAR LENGTH DEVICE. (SEE

MAINTENANCE)

FOR YOUR SAFETY – WHAT TO DO IF YOU SMELL GAS

The strong and distinctive odour of gas may make you aware of a gas leak. If you suspect a gas

leak:

 Extinguish all naked flames

 Immediately turn off all appliances and pilot lights.

 Do not allow gas to build up in the area. Open all doors and windows to both disperse the gas

and provide ventilation of fresh air.

 Allow sufficient time for any accumulated gas to disperse

 Ensure all persons are evacuated

 Turn off the gas supply at the source (gas meter, gas bottle etc.) and contact an authorised gas

fitter immediately.

 It must be serviced and repaired by a licensed plumber or gas fitter.

NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF

INSTALLATION – NOTES TO THE INSTALLER

APPLIANCE MUST BE INSTALLED ONLY BY A LICENSED GASFITTER OR

PLUMBER.

INSTALLATION

Position of Wok Cooker outlet pipe at the rear of the unit:

RB18 / CK801 RB28 / CK802

SAFETY PRECAUTIONS

MAKE SURE YOU AND YOUR LICENSED GAS FITTER/PLUMBER CAREFULLY READ ALL OF THESE

INSTRUCTIONS BEFORE INSTALLING THE COOKER. FOLLOW ALL WARNINGS AND

INSTRUCTIONS MARKED ON THE COOKER.

 Do not install a damaged cooker. Contact your service agent or supplier if the cooker is

damaged.

 Check the gas type of the cooker and make sure it is suited for the type of gas supplied.

 Make sure the gas inlet pipe is clean and not blocked before connecting the gas.

 Selecting a suitable position for the cooker is important to ensure maximum performance,

economy and safety of operation.

 Always ensure that adequate fresh air is provided for ventilation.

 The cooker must only be operated on a level, firm non-combustible surface.

 This cooker shall not be installed in a position where it could create a fire hazard and the

minimum clearances to combustible materials must be observed, as described below.

SERVICE INSTRUCTIONS FOR LISCENSE GAS FITTER OR PLUMBER.

(a) Remove all covers and other parts for access to all components.

(b) Remove all components for services.

CLEARANCES

 This cooker must be installed so that a vertical clearance of at least 1200mm is maintained

between its burners and any combustible material. Where it is not practical, the underside of

any combustible material with a vertical clearance of less than 600mm above a burner should

be protected by mill-board at least 6mm thick which is covered with sheet metal not less than

0.4mm thick, or protected by an equivalent material extending at least 225mm beyond the

sides of the cooker. In either case, the vertical clearance above the cooker burner should not

be less than 450mm.

 The minimum clearance from the cooker to rear or sides of combustible surfaces must be no

less than 250mm. When the cooker is installed abutting a side or rear wall, the wall must be of

non-combustible material, e.g. ceramic tiles. If surrounding walls are constructed with a

combustible material, contact your local Gas Authority for information on clearances required.

Combustible material Range hood

1. Remove all the packing materials from the cooker before

connecting the gas.

2. The piping should not be assembled beneath the cooker,

under direct sunlight and close to other sources of heat.

3. Unit Gas inlet fitting located at the rear of the cooker: ¼ ”

BSPM 60o coned

4. Ensure that the gas supply connection point is accessible

when the cooker is installed.

5. Connecting the gas pressure regulator:

 For Natural Gas (NG) Models:

- Screw the ¼” threaded female end of the NG Regulator onto the inlet connection at the

rear of the cooker and tighten with a suitable spanner. Make sure that the direction

arrow on the regulator points towards the cooker.

- The gas pressure regulator inlet fitting is of ½” BSP female. The connection of piping

must be made suitable to connect to the regulator inlet to provide a secure connection

free of gas leakage.

 For Propane Gas (PG) Models:

- The connection fitting required is ¼” BSP female threaded swivel nut with 60o inverted flare.

Connection to piping must be made suitable to connect to the regulator inlet to provide a

secure connection free of gas leakage.

Fix the cooker onto the bench by drilling holes into the bench top to the position of the fixing

brackets. Place brackets into position on the cooker over the burner support beam and screw into

position using the supplied screws. Screw the brackets securely to the bench top using the

appropriate nut and screws

7. Check for gas leakage at all joints with soapy water or other approved methods.

SAFETY INSTALLATION OF THE REULATOR AND HOSE ASSEMBLY

8. The installation of the regulator and hose assembly must follow the Australian Standard

AS5601.

9. The regulator and hose must be AGA approved.

10. The hose and regulator should not be assembled beneath the cooker, under direct sunlight and

close to other sources of heat.

11. Make sure the hose is not strained or twisted.

12. The hose must not exceed 1.8 metres in length.

13. Use a spanner to connect the hose and regulator, all connections must be gas tight

14. Check for gas leakage at all joints with soapy water or other approved methods.

. UNDER NO CIRCUMSTANCES SHOULD A NAKED FLAME BE USED IN CHECKING

FOR GAS LEAKS.

ALTERNATIVE INSTALLATIONS

There are no alternative methods of installations and connections

GAS REGULATOR (LOW PRESSURE) DETAILS

Natural Gas (NG) Models

 Maxitrol RV20LM Appliance Regulator AGA Approval No. 3088 (SUPPLIED)

- Pressure: 1.0 kPa

- Inlet: 1/4" BSP Female

- Outlet: 1/4" BSP Female

Or an equivalent AGA approved natural gas regulator with the same fitting.

PRESSURE ADJUSTMENT OF THE REGULATORS

 Never adjust the pressure of the regulators. The natural gas regulator is already adjusted to the

right pressure of 1kPa and the LP gas regulator to 2.8 kPa plus/minus 0.05

 If you suspect the pressure of the regulator is abnormal, please contact Austcrown Pty Ltd for

assistance.

CORRECT ASSEMBLY OF BURNER HEAD

FOR CK801NG/PG and CK802 NG/PG Models Only

TO GAS FITTERS - BEFORE LEAVING AFTER INSTALLATION

1. Make sure all connections are gas tight and have no gas leakage.

2. Check that the aeration control is adjusted to the right position to enable the burner to achieve

a blue and vigorous flame to reach complete combustion.

3. Make sure the flame is normal when adjusted to low flame; there should be no yellow flames at

anytime.

4. Check there is no backfire when the appliances is turned down to low or turned off.

5. The main gas supply valve is off

6. The gas control on the appliance is off

7. The consumer fully understands the safety precautions, operation and maintenance

8. The operation of the ignition system is satisfactory.

9. If a normal flame cannot be achieved after adjusting the aeration control plate, please contact

Austcrown Pty Ltd for assistance.

APPLIANCE DIMENSIONS

RB18/CK801 RB28/CK802

COMPONENTS AND PARTS

RB18NG RB28NG

PARTS INDEX

1. Trivet 3. Inner Ring Burner 5. Ignition/Control Knob 7. Rubber Leg

2. Outer Ring Burner 4. Body 6. Tray

CK801NG & CK801PG CK802NG & CK802PG

PARTS INDEX – NG AND PG MODELS

1. Body 3. Outer Ring Brass Cap 5. Tray 7. Rubber Leg

2. Trivet 4. Inner Ring Brass Cap 6. Burner Head 8. Knob

OPERATING INSTRUCTIONS

USING THE COOKER

Follow these steps when operating the cooker:

LIGHTING THE COOKER

1. Make sure the ignition knob set to the ‘OFF’ position.

2. Push in and turn the ignition knob anti-clockwise until a “click”

sound is heard. Make sure the burner has been lit properly.

ADJUSTING THE FLAME

1. Turn the ignition knob to the required flame setting position as shown below.

Lighting the cooker

OFF

TURNING OFF THE COOKER

1. Turn the ignition knob fully back to the OFF position until a

“click” sound is heard. Make sure there is no flow of gas

through the burner.

CAUTION - CORRECT PLACEMENT OF UTENSILS

MAINTENANCE

 Keep the cooker clean regularly by wiping with a damp cloth.

 Before checking and maintaining the cooker, make sure the main gas valve is turned off.

 Make sure the burner head(s) is/are clean before using the cooker. Use a steel wire brush to

clean the burner if it is heavily clogged. If the burner is heavily clogged, do not use the unit.

Contact your authorised plumber or gas fitter to carry out cleaning and maintenance. Do not

attempt to remove the burner unit(s) yourself.

 Check the gas pipes regularly for wear or leaks. If any wear or leaks are presents, please

contact an authorised plumber / gasfitter for repair.

 Do not touch the burner, trivet, tray etc. immediately after use or when in use. This could burn

your hand.

 Clean the trivet and tray after each use. Always wipe off spills, do not leave spills to dry on the

surface of the trivet, tray or burner.

 Inspect the electrodes carefully after you have removed the tray receptacle and if soiled, clean

with a dry cloth.

 For model CK801/802 only - Wash the burner head and burner cap with a moist and soaped

sponge or cloth. Do not put them in cold water immediately after use as thermal shocks could

cause cracking.

CLEANING VENTURI OR INJECTOR BLOCKAGE (FOR LICENCED GAS FITTER ONLY)

1. Turn off main gas supply.

2. Disconnect regulator or hose from gas supply.

3. Remove all trivet/s, tray/s and Burner Caps (CK801/802 only).

4. Turn over the cooker.

5. Remove the clip that hold on the burner head.

6. Remove the burner head from the cooker.

7. Check venturi (inlet) of the burner. Clean venturi with a long narrow screwdriver.

8. Check injector at the gas valve. Clean the injector with pipe cleaner or thin metal wire.

9. Replace burner head back to the cooker. Ensure the injectors are inserted correctly into the

centre of the air flow adjusting plate (a circular cut out).

10. Ensure to insert the clip to lock on the burner head.

Turning off the cooker

OFF

Do not place

anything e.g.

Flame tamer,

asbestos mat

etc. Between pan

and pan support

as serious

damage to the

appliance may

result.

Do not remove

the pan support

and enclose the

burner with a

wok stand as this

will concentrate

and deflect heat

onto the hotplate.

Do not use large

pots or heavy

weights which

can bend the pan

support or deflect

flame onto the

hotplate.

Locate pan

centrally over the

burner so that it

is stable and

does not

overhang the

appliance.

Use only wok

support supplied

or recommended

by the

manufacturer of

the appliance

11. Turn over the cooker, ensure it seat secure.

12. Replace Burner Caps (CK801/802 only)

13. Ensure the gas valve is a OFF position.

14. Connect the regulator or hose to the main gas supply.

15. Turn on gas supply.

16. Check gas leak. (See section “How to check for gas leaks”)

17. Ignite the burner. (See section “Lighting the Cooker”)

TROUBLESHOOTING

Problem Possible Cause Solution

No Ignition

Main Gas Valve is not turned

on.

Air trapped in the gas hose.

Electronic ignition is wet or

dirty.

The safety valve is not open.

Turn off the gas valve once and then turn it on fully.

Repeat the ignition process until all air in the hose is purged

completely.

Clean and wipe the electrode with a dry cloth.

Push in the ignition knob and turn it anti-clockwise until a click

sound is heard. Ensure the burner has been lit. Press the ignition

knob for 3-4 seconds and release the knob.

Gas Leaking

Failure of the gas valve.

Contact your dealer for a service/repair.

DO NOT ATTEMPT TO REPAIR IT YOURSELF.

Incomplete

Combustion

(Yellow

Flame)

Aeration shutters are not

properly adjusted.

Burner is not properly

assembled.

Flame holes of the burner

are clogged.

Nozzle is clogged.

Contact a gas fitter to adjust the aeration shutters to achieve the

optimum air/gas intake ratio.

Position the burner body properly.

Clean the burner head and the burner cap.

Contact your dealer for a service/repair.

DO NOT ATTEMPT TO REPAIR IT YOURSELF.

CONVERSION

This cooker is suitable for use with propane gas only and may not be converted for use on any other type of

gas, for further advice, contact place of purchase or their authorised agent for advice.

SERVICE INSTRUCTIONS FOR LISCENSE GAS FITTER OR PLUMBER.

(a) Remove all covers and other parts for access to all components.

(b) Remove all components for services.

TECHNICAL SPECIFICATION

Model Number RB18NG CK801NG RB28NG CK802NG CK801PG CK802PG

Heat Capacity (MJ/hr) 14.20 15.8 28.40 31.6 13.50 27.00

Dimensions (mm) (H)145x(W)292x(D)382 (H)145 x (W)720x(D)382 (H)145x(W)292x(D)382 (H)145x(W)720x(D)382

Net Weight (kg) 3.7 6.6 3.7 6.6

Outer burner 1.65 1.65 0.95

Inner burner 0.70 0.70 0.45

Injector

size (mm) pilot 0.90 0.90 0.50

Gas Type NATURAL PROPANE

Gas Pressure (kPa) 1.00 2.75

Gas Fitting ¼” BSPM 600 coned

Ignition System Piezo-electric

Country of Origin China

AGA Approval No. 7092G

Austcrown Pty. Ltd and their appointed agents will not be liable in respect of any misuse, which is not in accordance with the

instructions and precautions specified in this booklet.

AUSTCROWN PTY LTD

Website: www.auscrown.com.au

SERVICE AGENTS

For services and repairs, contact our service agent or any other authorised gas fitter and plumber.

Progress Plumbing and Gas Maintenance

16 Raymond Street, BLACKBURN VIC 3130

Ph: 9878 5845 Mobile: 0418 379 252

AUSCROWN

www.auscrown.com.au

- Natural Gas or LP gas - Stainless Steel Body

- Piezo Ignition - Pans & Pots Compatible

- Indoor or Outdoor Use - BBQ Side Burner

- Alfresco Cooking - Adjustable Double Ring Flame

AUSCROWN

WITH

BEEHIVE

BURNER

CK107LP/RB18NG CK203LP/RB28NG

CK801NG RB18NG CK801PG CK107LP CK802NG RB28NG CK802PG CK203LP

15.8MJ/hr 14.2MJ/hr 13.5MJ/hr 12.5MJ/hr 2 x 15.8MJ/hr 2 x 14.2MJ/hr 2 x 13.5MJ/hr 2 x 12.5MJ/hr

Outer Ring Ø0.95mm Ø0.90mm Ø0.95mm Ø0.90mm

Inner Ring Ø0.45mm Ø0.40mm Ø0.45mm Ø0.40mm

Pilot

Indoor Outdoor Indoor Outdoor

2.75kPa 1.0kPa 2.75kPa

Ø0.90mm Ø0.50mm Ø0.90mm Ø0.50mm

Ø1.65mm

Ø0.7mm

W720mmxD382mmxH145mm

6.53kg

Piezo-Electric

1/4" BSPM 60º Coned

Propane Gas Propane Gas

1.0kPa Natural Gas

Ø0.7mm

Ø1.65mm

Inlet Fitting

Country Of Origin

Dimensions

Natural Gas

W292mmxD382mmxH145mm

3.41kg

7092

China

Model

Heat Capacity

AGA Approval No

Net Weight

Ignition System

Gas Type

Gas Pressure

Injector Size

Operating Location

CK801PG/NG CK802PG/NG

Outer Ring High

Inner Ring High Outer Ring Low

Inner Ring Low Outer Ring Off

Inner Ring High Outer Ring Off

Inner Ring Low

WITH

BRASS CAP

BURNER

Ideal for Everyday Use

DUST CAP FOR GAS CYLINDER VALVE

STEP 1 STEP 2

STEP 3 FINISH

Cap with

POL Male Thread

Cap with

Female Thread

Cap with

No Thread

AUSCROWN

STAINLESS STEEL TABLE FOR COOKERSTAINLESS STEEL TABLE FOR COOKER

Max Load 50kg

Model SB602

Gross Weight

Dimensions (Overall) 6.7kg

W720mmxD520mmxH812mm

Can be used with

- Handy Range

- Single Wok Burner

- Double Wok Burner

- Rice Cooker

- High Pressurer Wok

Burner

- Portable Cast Iron

Burner

SB602

DISPOSABLE POL SEAL

Install

Remove

AUSCROWN Butane Gas HANDY RANGE

Features:

Portable / Piezo Ignition / Indoor or Outdoor / Light Weight / Easy to Use / Compact

Model AD90

Injector Size Ø0.55mm

Dimensions W343mm x D256mm x H111mm

AGA Approval No 5240

Gas Type Butane Gas

Gas Pressure Cartridge Pressure

Heat Capacity 7.0MJ/hr

Gas Consumption 150g/hr

Net Weight 1.7kg

Ignition System Piezo-Electric

238GM

BUTANE GAS CARTRIDGE

GP33 KOREAN BBQ GRILL PLATE

AD90

Features:

- 33cm diameter.

- Removable non-stick grill plate.

- Steam function.

- Enameled pan.

- Grill plate lifter included. Grill plate lifter included.

For convenient and safe

handling.

How it works

Steam action.

Keeps food moist & succulent when cooking.

Enamelled pan.

Collects excessive grease

and reduces smoke

* Handy Range Not Included. Removable non-stick

grill plate. Makes cooking

and cleaning easy.

KW707 BUTANE GAS BLOW TORCH

Product name Butane gas blow torch

Model KW707

Heat Capacity 1,325 Kcal/hr (1.54KW/hr)

Gas Consumption 125gm/hr

Jet Size 0.27mm Diameter

Burner Diameter 22.5mm

Dimensions (mm) 165 x 55 x 32

Net Weight 130gm

Gas Type AUSCROWN butane gas

Gas Pressure 2-3kg/cm2

Inlet Fitting AUSCROWN Butane gas canister nozzle type

AUSCROWN BRUSHED STAINLESS STEEL

CANOPY RANGE HOODS

Features:

Strong Suction / Brushed Stainless Steel Body / 3 Speed Control /

Micromesh Filters /Optional Charcoal Filter / Ducted or Re-circulated Exhaust

CS900 900MM CS600 600MM

CI900G 900MM ISLAND TYPE

WITH TEMPERED GLASSCI900 900MM ISLAND TYPE

C900GH 900MM CANOPY

WITH TEMPERED GLASS

X: Heigh when duct cover fully extended.

Model C900GH CS900 CS600 CI900 CI900G

Dimensions

W900mm

D475mm

H560mm

X950mm

W900mm

D480mm

H520mm

X910mm

W600mm

D480mm

H520mm

X910mm

W895mm

D600mm

H637mm

X1204mm

W895mm

D600mm

H613mm

X1180mm

Net Weight 21kg 22kg 17kg 27kg 29kg

Lamp Power

Flow Rate

Load of Motor

Duct Size

C tick Approval

AS Approval

Power

No. of Motor 240V 60Hz

V06076/0

N2788

1000m³/hr

2 x 2W

Ø150mm

4 x 2W

250W

PORTABLE FOR OUTDOOR USE WITH LP GAS BOTTLE

RamboRambo

Model HPA100LPB RH31LT HP200LPB

Dimensions W320mm x L520mm x H160mm W330mm x L490mm x H180mm W415mm x L690mm x H220mm

Net Weight 6.6kg 7.7kg 14.9kg

Injector Size Burner :Ø0.90mm

Pilot: Ø0.45mm Burner: Ø0.90mm

Pilot: Ø0.25mm

Outer Ring: Ø0.1.2mm

Inner Ring: Ø0.55mm

Pilot: Ø0.25mm

Ignition System Piezo Electric Manual with Pilot Manual with Pilot

Gas Pressure 61kPa

Heat Capacity 64MJ/hr

Gas Consumption 1.6kg/hr

Gas Type

Inlet Fitting 1/4" BSPM 60º Coned

Propane

55MJ/hr

100kPa

1.0kg/hr

COMPLETE WITH HOSE & REGULATOR COMPLETE WITH HOSE & REGULATOR

WITH AUTOMATIC IGNITION

Low PressureLow Pressure

COMPLETE WITH HOSE & REGULATOR COMPLETE WITH HOSE & REGULATOR

RBC176LP RBC225LP

20MJ/hr 32MJ/hr

0.42kg/hr 0.64kg/hr

Inner Ring Ø0.65mm Ø0.90mm

Outer Ring Ø1.20mm Ø1.30mm

Pilot Ø0.60mm Ø0.6mm

W290mm x D540mm x H130mm W350mm x D600mm x H140mm

5.16kg 6.6kg

Approval No. IAPMO R&T OCEANA GMK10042

Net Weight

Inlet Fitting 1/4" BSPM 60º Coned

Country of Origin

ULP gas

2.75kPa

Piezo Electric

China

Injector

Size

Gas Consumption

Model

Gas Pressure

Heat Capacity

Gas Type

Ignition System

Dimensions

RH31LT with pilotRH31LT with pilot HP200LPB 2 ring high with pilotHP200LPB 2 ring high with pilot HPA100LPB with auto ignitionHPA100LPB with auto ignition

Powerful Heat CapacityPowerful Heat Capacity

RH31LT & HP200LPB

for overseas only

not for Australia

FOR OVERSEAS MARKET ONLY FOR OVERSEAS MARKET ONLY

PORTABLE

FOR OUTDOOR USE

WITH LP GAS BOTTLE

PORTABLE

FOR OUTDOOR USE

WITH LP GAS BOTTLE

DUAL RING CONTROLDUAL RING CONTROL

AUSCROWN LOW PRESSURE

CAST IRON RING BURNER

Features:

High Heat Capacity / Portable / Ideal for Outdoor Cooking / Individual Ring Control

*Burners Not Included

FRAME FOR CAST IRON RING BURNER

Features: Portable / Ideal for Stockpot Cooking

C20LP C30LP C40LP C50LP

Model C20LP C30LP C40LP C50LP

Number of Rings 1 2 3 4

Heat Capacity 12MJ/hr 20MJ/hr 30MJ/hr 52MJ/hr

Gas Consumption 0.26kg/hr 0.44kg/hr 0.65kg/hr 1.28kg/hr

Injector Size Ø1.0mm 1st Ring: Ø0.7mm

2nd Ring: Ø1.1mm

1st Ring: Ø0.50mm

2nd Ring: Ø0.90mm

3rd Ring: Ø1.20mm

1st Ring: Ø0.50mm

2nd Ring: Ø0.80mm

3rd Ring: Ø1.05mm

4th Ring: Ø1.50mm

Dimensions W190mm

L370mm

H85mm

W185mm

L420mm

H85mm

W250mm

L470mm

H95mm

W360mm

L635mm

H110mm

Net Weight 1.82kg 3.2kg 6.2kg 12.8kg

Gas Type

Gas Pressure

Ignition System

Inlet Fitting

AGA Approval No 6429

Propane Gas

2.75kPa

Manual

1/4" BSPM 60º Coned

Supplied with

AGA approved

regulator & 1.2 meter hose

FF30 FF40 FF50

C30LP C40LP C50LP

W378mm x D378mm x H175mm W430mm x D430mm x H175mm W530mm x D530mm x H175mm

5.6kg 6.6kg 8.8kg

Ø458mm Ø510mm Ø610mm

Ø378mm Ø430mm Ø530mm

Model

Dimensions

Net Weight

Minimum Pot Size

Maximum Pot Size

Suit for

FF30

C30LP

FF30

Rings can be operated individually

AUSCROWN

GAS LIGHTERS / PIEZO IGNITOR

SL160

PIEZO ELECTRIC

IGNITOR

BBQL CAST IRON BBQ LONG BURNER

Overall Length: 40.5cm

Burner Length: 35cm

Burner Width: 7.8cm

Inlet Size: Ø1.3cm

N.W.: 1.9kg

GM28

BUTANE GAS MATCH

WITH CHILD SAFETY LOCK

Ideal for Manual Ignition Gas Appliances

CAST IRON LOW PRESSURE COUNTRY COOKER

GB01LP 1 burner GB02LP 2 burners GB03LP 3 burners

FOR OUTDOOR USE ONLY

Features: Portable / Ideal for Outdoor Cooking / Double Ring Burner

Supplied with Hose and Regulator

Ring Burner Country Cooker

JZDD17

PIEZO ELECTRIC

IGNITOR

Model GB01LP GB02LP GB03LP

Heat Capacity 12MJ/hr 2 x 12MJ/hr 3 x 12MJ/hr

Gas Consumption 0.26kg/hr 2 x 0.26kg/hr 3 x 0.26kg/hr

Dimensions (mm) W270 x D350x H140 W520 x D350 x H140 W770 x D350 x H140

Net Weight 3.20kg 5.5kg 8.7kg

Gas Type

Gas Pressure

Injector Size

Ignition System

Gas Inlet Fitting

AGA Approval No

Country of Origin China

Ø1.0mm

Manual

1/4" BSPM 60º Coned

Propane Gas

2.75kPa

6327

Page is loading ...

Auscrown CK801NG Installation & Operating Instructions Manual

Brand: Auscrown

Model: CK801NG

Category: Barbecues & grills

Type: Installation & Operating Instructions Manual

This manual is also suitable for

Here are some possible use cases for the Auscrown CK801NG:

Quick and easy weeknight meals: The high-powered burner can quickly heat food, making it ideal for cooking stir-fries, pasta dishes, and other quick meals.

Download PDF

report

Auscrown CK801NG Installation & Operating Instructions Manual

This manual is also suitable for

Auscrown CK801NG Installation & Operating Instructions Manual

Related papers

Other documents