11
Accessing the Network Settings
The Network Tab allows access to configuring network settings such as TCP/IP, IPP, FTP,
SNMP, SMB, LDAP Email, SSL/TLS, authentication etc…
Description Action
Access the Network settings. Click the “Network” Tab.
Click on TCP/IP This screen is used to set a summary of
the image controller interface. When TCP/IP
is disabled, you still need to set parameters.
if set to disable, end users will not have
access to web connection. this can be
used if there are security concerns.
Click on IP Filtering This screen is used to specify the host
address and restrict access permission.
You can also use this screen to enable or
disable access permission, access refusal,
and their ranges of TCP/IP filtering. For
example, a company wants to allow a
specific segment access to Web Connection
but another segment cannot have access.
Click on Netware (Novell) This screen is used to enter and confirm
various settings concerning NetWare
IPP This screen is used to enter and confirm
settings concerning IPP. When IPP Print
is set to disable, you still need to set
parameters.
FTP FTP CLient - This screen is used to enter and
confirm various settings concerning the FTP
client, such as proxy and timeout settings.
FTP Server This screen is used to enter and confirm
various settings concerning the FTP server.
Enable or disable.
SNMP Enable or disable SNMP
SMB Enable or disable SMB scans
SMB Print Enable or Disable SMB Printing. If set
to disable, parameters still have to be set.
Apple Talk Enable or Disable
bizhub C450 Web Connection Job Shop