Dwyer Series PFG User manual

Type
User manual

Dwyer Series PFG is a versatile tool designed to simplify the monitoring of filter performance and differential pressure in various industrial and commercial applications. Here are some of its key capabilities and potential use cases:

  • Filter Monitoring: The PFG can be connected to an in-line filter to monitor its condition. Its differential pressure indicator provides a clear visual representation of the pressure drop across the filter, helping users determine when filter replacement is necessary. This can help prevent costly downtime and equipment damage caused by clogged filters.

  • Differential Pressure Measurement: The PFG can also be used to measure differential pressure in applications such as line loss, valve drop, and other situations where a simple and reliable pressure indicator is required. Its ability to measure pressure drops up to 300 psig makes it suitable for a wide range of industrial processes.

Dwyer Series PFG is a versatile tool designed to simplify the monitoring of filter performance and differential pressure in various industrial and commercial applications. Here are some of its key capabilities and potential use cases:

  • Filter Monitoring: The PFG can be connected to an in-line filter to monitor its condition. Its differential pressure indicator provides a clear visual representation of the pressure drop across the filter, helping users determine when filter replacement is necessary. This can help prevent costly downtime and equipment damage caused by clogged filters.

  • Differential Pressure Measurement: The PFG can also be used to measure differential pressure in applications such as line loss, valve drop, and other situations where a simple and reliable pressure indicator is required. Its ability to measure pressure drops up to 300 psig makes it suitable for a wide range of industrial processes.

Bulletin P-1-PFG
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: 219/872-9057 e-mail: info@dwyer-inst.com
Specifications - Installation and Operating Instructions
Series PFG Process Filter Gage
The Series PFG Process Filter Gage is designed for determining the
state of an in-line filter. The differential pressure indicator determines the
pressure drop on either side of a filter through its 1/4˝ female NPT pressure
connections, and relates the value to one of three zones: clean (green),
change (yellow), or dirty (red). The Series PFG is perfectly suited for filter
applications, line loss, valve drop, and many other differential pressure
applications where a simple indicator is needed.
MOUNTING
The Series PFG features two #10-32 UNF threaded holes in its mounting
block for easy mounting. The holes are 3/4˝ apart and located at the same
level as the end process connections. The direction of process flow is
indicated on the dial, with the arrow pointing to the low pressure port. In
order to change the high and low pressure connections, simply remove the
indicator from the mounting base and rotate 180°. Retighten the plastic
bolts to 20-25 inch pounds of torque.
MAINTENANCE
Upon final installation of the Series PFG Process Filter Gage, no routine
maintenance is required. A periodic check of system calibration is
recommended. The Series PFG is not field serviceable and should be
returned if repair is needed (field repair should not be attempted and may
void warranty). Be sure to include a brief description of the problem plus
any relevant application notes. Contact customer service to receive a
return goods authorization number before shipping.
SPECIFICATIONS
Service: Liquids/gases compatible with Stainless Steel, Ceramic, GFN,
and Aluminum.
Wetted Materials: Stainless Steel, Ceramic, Glass Filled Nylon,
Aluminum.
Accuracy: ±5% F.S.
Max. Temperature: 200°F (93°C).
Max. Pressure: 300 psig.
Materials: Body: Glass Filled Nylon
Mounting Block: Aluminum
Lens: Polyester.
Elastomers: Buna-N.
Process Connections: 1/4˝ female NPT.
Field Mounting: Any orientation with 10-32 threaded holes 3/4˝ apart.
Dimensions: 3.25” H x 3.25” W x 1.5” D.
Weight: 11.2 oz (317.5 g).
©Copyright 2008 Dwyer Instruments, Inc. Printed in U.S.A. 8/08 FR# R1-443662-00
2-9/32
[57.91]
1/2
[12.70]
1-1/4
[31.75]
3/4
[19.05]
3-1/4
[82.55]
2x #10-32 UNF
MOUNTING
HOLES
1-1/2
[38.10]
2X 1/4 NPT
CONNECTION
3-1/4
[82.55]
SERIES PFG
HIGH
PRESSURE
LOW
PRESSURE
IN-LINE
FILTER
FLOW
FLOW
Installation Diagram
P-1-PFG:TEMPLATE 8/18/08 10:46 AM Page 1
  • Page 1 1

Dwyer Series PFG User manual

Type
User manual

Dwyer Series PFG is a versatile tool designed to simplify the monitoring of filter performance and differential pressure in various industrial and commercial applications. Here are some of its key capabilities and potential use cases:

  • Filter Monitoring: The PFG can be connected to an in-line filter to monitor its condition. Its differential pressure indicator provides a clear visual representation of the pressure drop across the filter, helping users determine when filter replacement is necessary. This can help prevent costly downtime and equipment damage caused by clogged filters.

  • Differential Pressure Measurement: The PFG can also be used to measure differential pressure in applications such as line loss, valve drop, and other situations where a simple and reliable pressure indicator is required. Its ability to measure pressure drops up to 300 psig makes it suitable for a wide range of industrial processes.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI