TEAC LE49E5S1UHD User manual

Brand: TEAC

Model: LE49E5S1UHD

Category: LCD TVs

Type: User manual

This manual is also suitable for

USER MANUAL

WARRANTY INFORMATION INSIDE. PLEASE READ

www.teac.com.au

IMPORTANT !

Trademark of TEAC Corporation JAPAN

LE43E5S1UHD

LE49E5S1UHD

LE55E5S1UHD

LE65E5S1UHD

UHD LED/LCD TV

WARRANTY PROCEDURE

v 17.1: LED TV: July

2017

Please read the owner’s manual carefully and ensure that you have followed the correct installation and operating procedures.

1. Please read this warranty card.

2. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.

3. If you require Warranty Service, please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance. Please ensure

that you have the model number, serial number and purchase receipt ready when you call.

Please complete the section below and keep this information for your own records.

Owner’s Name

Owner’s Address

Postcode

Model Name/No. Serial No.

Dealer’s Name

Dealer’s Address

Postcode

Thank you for selecting a TEAC product.

If your TEAC product malfunctions, please call us directly for warranty support

between Monday to Friday at 8.30AM – 5PM AEST at the

TEAC Warranty Service Hotline

1300 553 315

For other enquiries, please contact us at:

www.teac.com.au

When calling to receive warranty service, please have:

1. Your model and serial number

2. Proof of purchase

3. And your product in front of you

NOTE:

- You are required to provide a copy of your proof of purchase in order to have your claim

processed.

- Please read the Terms and Conditions for details of your warranty entitlement.

TERMS AND CONDITIONS

v 17.1: LED: July 2017

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a

replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You

are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not

amount to a major failure.

1. TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill.

Maintenance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC warranty only applies to TEAC products purchased

NEW from a TEAC Authorised Retailer in Australia. This warranty only applies to the original purchaser and cannot be transferred.

2. The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to

goods or services to which the warranty relates, being the Australian Consumer Law.

3. Refund or replacement via your TEAC Authorised Retailer is available for a period of 14 days after purchase for goods that have been

inspected and determined to have a major failure. Refund and exchange is not applicable for change of mind.

4. Subject to the terms herein, this warranty effectively covers TEAC products, excluding products purchased for commercial purposes, as

specified in the Warranty Periods Table below from the date of purchase.

TEAC PRODUCT

excluding commercial use products

SIZE (TV)

WARRANTY PERIOD

from date of purchase

WARRANTY SERVICE TYPE

LED/LCD TV*

19” to 50”

36 months

Authorised Service Centre Service

51” and above

0 to12 months

In-home service**

13 to 36 months

Authorised Service Centre Service

5. *Applicable to TVs purchased from July 1st 2017.

Contact customer care on 1300 553 315 if you wish to confirm the warranty terms of your TV.

**In Home Service/Pick up Service

This service will only be provided as part of this warranty if all the following conditions are met;

a) The product is indicated in the Warranty Period Table.

b) The product is within the warranty period.

c) The product is located within the normal service area of the local TEAC Authorised Service Centre.

Proof of product purchase is required. If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking

the product to a TEAC Authorised Service Centre.

Authorised Service Centre Service

The purchaser is required to send the product at their own expense to the nearest TEAC Authorised Service Centre for repair. In this event,

proof of purchase is required to support a warranty claim. After the repair, the product will be available for collection by or return to the

purchaser at a fee upon request. TEAC in-home service can be made available at a fee upon request.

6. A 12-month replacement warranty is applicable to all Accessories such as Remotes, Power Adapters and Cables.

7. TEAC will ensure to the best of its abilities that all required parts are made available for any required service/repair.

8. TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable

period based on available resources and workload during the time when service is requested and performed.

9. Refurbished parts may be used to repair the product. In the case of a replacement, the product may be replaced, with a refurbished unit of the

same type or, if one is unavailable, a similar refurbished model with equal or better features and specifications.

10. Please be advised that if the product presented for repair is capable of retaining user-generated data, the data may be lost during servicing.

Customers are strongly encouraged to back up all important information/data before sending the product in for service/repair.

11. Service will be provided only during normal business hours and under safety conditions and circumstances. TEAC and its authorised service

agents can refuse any repair if safety, in relation to OH&S, becomes a concern to its staff or authorised service agents’ personnel.

12. The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if:

a) The product was not transported, installed, operated or maintained according to manufacturer instruction, or

b) The product was abused, damaged, tampered, altered or repaired by any unauthorised persons, or

c) Product failure is due to accidents during use, installation or transit, power surges, use of defective or incompatible external devices, exposure

to abnormal conditions such as excessive temperatures or humidity, or entry of liquids, objects or creatures into the product, cockroach

infestations, or

d) The customer is unable to provide proof of purchase of the product for verification, or

e) The serial number of the product is missing or has been tampered with.

13. Where any repairs or services required that are outside of the terms and conditions of this Warranty are requested by the customer, or where

a fault is determined to be outside of the terms and conditions of the Warranty, the customer shall be charged for the cost of the repair.

14. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment

other than as stated in this warranty and outlined above.

15. TEAC and/or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed

by customers/retailers.

16. LCD dead pixel policy, please contact TEAC at support@teac.com.au for assistance.

Contents

TOPIC PAGE

Safety Information ………………………………………………………………….……………2

Introduction ……..……………………………….……………………………………………….5

Unit Overview…...………………………………………………………………………………..6

Remote Control ………………………………………………………………………………….8

Initial Set Up ...…………………………………………………………………………………...9

Smart Features & Apps …..………………………………………….………………………...11

Watching TV …………..………………………………………………...……………………...14

PVR Recording …………………………………………………………….…………………...16

USB Media Playback……………..………………………………………………………..…...17

Menu System & Advanced Controls ..………………………………...……………………...19

Internet Connectivity ……………………………………………………………………….…...21

Troubleshooting ………………………………………………………………………….……...25

Specifications ………………………………………………………………….………………...26

Safety Information

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT - Please read these instructions fully before installing or operating

In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV

set from the mains. The mains plug is used to disconnect TV set from the mains and therefore it must

remain readily operable. If the TV set is not disconnected electrically from the mains, the device will

still draw power for all situations even if the TV is in standby or switched off.

Note: Follow the on screen instructions for operating the related features.

WARNING: Never let people (including children) with reduced physical, sensory or mental

capabilities or lack of experience and / or knowledge use electrical devices unsupervised.

• Use this TV set at an altitude of less than 2000 meters above the sea level, in dry locations

and in regions with moderate or tropical climates.

• The TV set is intended for household and similar general use but may also be used in public

places.

• For ventilation purposes, leave at least 5cm of free space around the TV.

• The ventilation should not be impeded by covering or blocking the ventilation openings with

items, such as newspapers, table-cloths, curtains, etc.

• The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the

power cord.

• Never touch the power cord/plug with wet hands as this could cause a short circuit or electric

shock. Never make a knot in the power cord or tie it with other cords. When damaged it must

be replaced, this should only be done by qualified personnel.

• Do not expose the TV to dripping or splashing of liquids and do not place objects filled with

liquids, such as vases, cups, etc. on or over the TV (e.g., on shelves above the unit).

• Do not expose the TV to direct sunlight, or open flames such as lit candles beside the TV.

• Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.

• Do not place the TV on the floor and inclined surfaces.

• To avoid danger of suffocation, keep plastic bags out of the reach of the babies, children and

domestic animals.

• Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws

firmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand

rubbers properly.

• Do not dispose of the batteries in fire or with hazardous or flammable materials.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

Caution

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Maintenance

Important maintenance component

Markings on the Product

The following symbols are used on the product as a marker for restrictions and precautions and safety

instructions. Each explanation shall be considered where the product bears related marking only. Note

such information for security reasons.

Class II Equipment: This appliance is designed in such a way that it does not require a safety

connection to electrical earth.

Class II Equipment With Functional Earthing: This appliance is designed in such a way that

it does not require a safety connection to electrical earth, the earth connection is used for

functional purposes.

Protective Earth Connection: The marked terminal is intended for connection of the protective

earthing conductor associated with the supply wiring.

Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal operating

conditions.

Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin

or button cell batteries.

Class 1 Laser Product: This product contains Class 1 laser source that is safe

under reasonably foreseeable conditions of operation.

WARNING

Do not ingest the battery: Chemical Burn Hazard

Never place a television set in unstable or inclined locations. A television set may fall, causing serious

personal injury or death. Many injuries, particularly to children, can be avoided by taking simple

precautions such as;

• Using cabinets or stands recommended by the manufacturer of the television set.

• Only using furniture that can safely support the television set.

• Ensuring the television set is not overhanging the edge of the supporting furniture.

• Not placing the television set on tall furniture (for example, cupboards or bookcases) without

anchoring both the furniture and the television set to a suitable support.

• Not standing the television set on cloth or other materials placed between the television and

supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television set or its

controls. If your existing television set is being retained and relocated, the same

considerations as above should be applied.

• Read the instructions before mounting your TV on the wall.

• The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your

TV.

• Do not install the TV on a ceiling or on an inclined wall.

• Use the specified wall mounting screws and other accessories.

• Tighten the wall mounting screws firmly to prevent the TV from fall. Do not over-tighten the

screws.

Apparatus connected to the protective earthing of the building installation through the MAINS

connection or through other apparatus with a connection to protective earthing – and to a television

distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection

to a television distribution system has therefore to be provided through a device providing electrical

isolation below a certain frequency range (galvanic isolator).

WARNING

Large TVs are fall hazards. You should

use furniture straps to fix the TV to the

wall and/or the entertainment cabinet,

to avoid risk of injury or death due to a

falling TV. (Anti-tip TV/furniture straps

sold separately)

Environmental Information

When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also

reduce energy consumption.

TRADEMARK ACKNOWLEDGMENT

The terms HDMI and High-Definition Multimedia Interface, and the HDMI Logo

are trademarks or registered trademarks of HDMI Licensing Administrator, inc. in

the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D

symbol are trademarks of Dolby Laboratories.

YouTube and the YouTube logo are trademarks of Google Inc.

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of

this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property,

including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content

and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content

owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation

should not affect unprotected content or content protected by other content access technologies. Content owners

may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to

access content that requires the upgrade.

Introduction

What’s In The Box

1. TV set

2. Remote control and batteries

3. User manual

4. Quick Start Guide

5. Stand

6. Screws for the stand

7. Power cable

Installing Remote Control Batteries

1. Open the battery cover.

2. Insert two AAA size batteries. Place the batteries with their terminals corresponding

to the (+) and (-) indications in the battery compartment.

3. Replace the cover.

If the remote control’s signal becomes weak or stops working, replace the batteries in the

remote control.

WARNING: Batteries are a health hazard – keep away from children. If batteries are

swallowed, seek medical attention immediately.

Using the TV Stand and Wall Mounting

The TV is provided with mounting holes for a VESA approved wall mounting bracket. Please

see the Specifications section for the VESA mounting bracket size and screw sizes

(mounting bracket and screws sold separately, not included).

Remove the screws holding the base to the base bracket and lift the base away (do not

remove the base mounting brackets). Mount the VESA bracket using screws. Do not use

screw s longer than required, otherwise you may cause damage to the internal components.

CAUTION: Your new TV is heavy; please consult a professional wall mount installer to

perform this installation.

WARNING: If you use the TV on its stand, use anti-tip furniture straps to fix it to the wall

and/or the entertainment cabinet, to prevent pets and children from causing it to fall over.

Unit Overview

Cable Connections

1. DIGITAL AUDIO out – high quality digital audio. Connect to compatible sound systems

2. USB2.0 – connect to USB hard drives/flash drives for recording and media playback

3. LAN – for wired network connection

4. HDMI 3 – high quality video/audio input

5. AV IN – RCA audio/video input – connect to a set top box/DVD player

6. HDMI 2 – high quality video/audio input

7. HDMI 1 – high quality video/audio input

8. AUDIO out – stereo (left/right) audio output. Connect to compatible sound systems

9. ANTENNA – connect to your antenna point with an antenna cable to receive TV

10. USB3.0 – connect to USB hard drives/flash drives for recording and media playback

11. EARPHONE – connect earphones/headphones for private listening

Control Panel Buttons

VOL+ : Volume up / navigate right

VOL- : Volume down / navigate left

CH+: Next TV channel / navigate up

CH - : Previous TV channel / navigate down

/ MENU: Press to turn the TV on / enter menu / return

While the TV is on, press / MENU to bring up the menu shown below.

▪ Use the VOL+/- and CH+/- buttons as directional buttons for navigation, and highlight

the desired item.

▪ Press / MENU to confirm your selection.

▪ Press and hold / MENU to return to the previous screen/menu.

Menu Item

Function

HOME

Access smart features and applications

OPTIONS

Access Wireless Display, Enjoy Music, Sleep Timer, PVR, Soundbar

Ready, and Sports Mode

Enter the on-screen menu (TV, PICTURE, SOUND, TIME, SYSTEM,

LOCK)

STANDBY

Turn the TV off into Standby Mode

RETURN

Return to the previous screen/menu

Remote Control Buttons

(POWER) Turns the TV on or standby

Access TV Mode

SOURCE

Bring up the SOURCE menu for changing input

0 – 9

(Numeric buttons) Enters channel numbers

SUBTITLE

Select from available subtitle languages

Go to the YouTube homepage

VOL +/-

(VOLUME UP/DOWN) Adjust the TV's volume

(MUTE) Turn the volume off or on

(HOME) Go to the smart TV homepage.

CH +/-

(CHANNEL UP/DOWN) Navigate the channel list

Go to the Netflix homepage

Go to the browser homepage

(SETTING) Brings up the main menu or press to

return to the previous menu.

ZOOM +/-

Press to select the desired screen format.

Note: This function is not available in USB mode

 

(UP/DOWN/LEFT/RIGHT) Highlight different items

in the menu system and adjust the menu controls

Confirm selection or change settings in the menu

(BACK) In Menu Mode, goes back to the previous

menu or interface; in TV Mode, goes back to the

most recently viewed channel

EXIT

Exits the menu system

INFO

Displays information on the current program/source

USB

Enters USB Mode to view multimedia files

(OPTION) Shortcut to Wireless Display, Enjoy

Music, Sleep Timer, PVR, Soundbar ready,

Sports Mode

SLEEP

Repeatedly press to set the TV to turn off after a

given amount of time. To cancel the sleep timer,

press until Off appears

GUIDE

Toggles the Electronic Programme Guide.

Note: Only available in DTV mode

FAV

Brings up your Favourite Channel List.

Note: See Program Edit in “Menu Systems”

CH LIST

Displays the channel list menu.

Coloured

buttons

(RED/GREEN/YELLOW/BLUE) Performs the

corresponding function indicated at the bottom of

the screen

PICTURE

Press to cycle through available Picture Modes

SOUND

Press to cycle through available Sound Modes

TEXT

Teletext (Teletext service depends on your region)

LANG

Select an available sound type for analogue TV, or

select an audio language available for the current

digital TV program

(PREVIOUS) Skip to the previous chapter

(STOP) Stops media playback

(PLAY/PAUSE) Starts/pauses playback

(NEXT) Skip to the next chapter

Fast rewind

Fast forward

Note: The above six buttons can be used for playing music,

pictures and videos in USB Mode

Initial Set Up

CAUTION: Ensure that the power to the TV is turned off while making or changing

connections.

Power Connection

To connect the TV to power:

1. Connect the power cord to its socket at back of the TV and then plug into a suitable

power outlet.

2. Turn on the power at the outlet.

Antenna Connection for TV Reception

1. Use a compatible antenna cable.

2. Connect the RF jack at the back of the TV to your antenna point on the wall.

Initial Set Up

When you switch on the TV for the first time, the Initial Setup menu will be

displayed on the screen.

Setup navigation

▪ Press the ▲ / ▼/  /  buttons to select different sub-menus.

▪ Press the OK button to confirm settings.

▪ Press the  button to go back to the previous step.

Step One: Language

Use the ▲/▼ buttons to select your On-Screen Display (OSD) language and then press the

OK button to go to the next step.

Step Two: Location (Usage Mode)

Use the ▲/▼ buttons to select “Home Mode” as the usage mode of your new TV and then

press the OK button to go to the next step. Press the  button if you need to return to the

previous step.

NOTE: Home Mode is tuned for best energy efficiency. Store Mode is suited only for shop displays

and settings may reset periodically. Please use Home Mode when you set the TV for personal use.

Step Three: Disclaimer

Use the ▲/▼ buttons to read the complete disclaimer. Then select ‘I agree’ and press OK to

go to the next step.

Step Four: Network Type

NOTE: Make sure your Cable/DSL modem/router is turned on.

▪ Select Set-up and press the OK button on the remote control to continue and display

the Network Settings menu.

▪ To skip the network setup process and move to the next step, select ‘Skip’ and press

the OK button, then skip to Step Five. You can set up the network later via the user

menu.

▪ If you choose to set up the network now, press OK to choose between Wired and

Wireless.

WIRED:

1. First ensure that your Ethernet cable is connected to the LAN jack of the TV.

2. Press OK to select “Configuration”, then press ▼ to select OK.

WIRELESS:

1. Press  to turn Wireless to On, then select “Wireless Access Point” and

press OK.

2. A list of available networks will be displayed on the screen. Highlight the

desired network by using ▲ / ▼, then press OK to proceed.

3. Highlight “Password” and press OK to display the password prompt “Please

enter password”.

4. Press OK once again to show the on-screen keyboard. Use the ▲ / ▼/  / 

buttons to select characters and press OK to enter them.

5. When finished, choose “return” on the on-screen keyboard close the

keyboard. Then press  to submit your password and connect to the network.

6. If your password entry was unsuccessful, you can press the  button to go

back to the previous screen and try again.

Once you are successfully connected, press OK/RETURN to go to the next step.

Step Five: Time Zone

▪ Use the ▲ / ▼ buttons to select your Time Zone and then press the OK button to go

to the next step.

Step Six: Channel Scan

▪ Use the ▲ / ▼ buttons to select Scan and press the OK button to begin scanning for

digital TV stations. Scanning will take a few minutes. If you need to exit channel

tuning, press the EXIT button. You will be asked to confirm “Yes/No”. (You can

always rescan later from the TV Menu “Auto Tuning”.)

▪ When channel scanning is complete, your TV will show the first channel on the

channel list.

Smart Features & Apps

Homepage

Press the button on the remote control. Here you can run the installed apps and access

input sources and menu options. Press the  /  buttons to select these functions.

To hide the Homepage, press the EXIT button.

Smart TV Applications

▪ App Store

▪ Netflix

▪ YouTube

▪ GoLIVE

▪ Web browser

▪ Twitter

▪ Facebook

▪ nScreen

▪ Wireless display

Netflix

▪ Netflix is a streaming service that offers unlimited viewing of a wide variety of award-

winning TV shows, movies and documentaries.

▪ A paid subscription is required.

▪ This TV can play Netflix content in Ultra HD 4K resolution, however the playback

resolution may be lower depending on your subscription level and your network

speed.

▪ Streaming Netflix content will count towards the data usage of your broadband plan.

APP Store

You can find more applications and media from the APP Store.

▪ Select an app and press OK to see a description of the app. Then, select OPEN and

press OK to load the app.

▪ Press BACK to go back to the previous page.

▪ Press EXIT anytime to go back to the Homepage.

nScreen

You can control your TV on your Android or Apple smartphone by using the My nScreen

app.

1. Download and install the app by scanning the QR code shown on the TV screen.

(QR code scanning requires a third party app – you can find and install one you’re

your smartphone from your Apple/Android app store.)

2. Open the My nScreen app and the app will automatically connect with the TV. If not,

click on Settings to set up the connection.

3. Select ‘Remote Control’ to control your TV.

4. Slide the screen to the left to access various control buttons.

NOTE: Make sure your smartphone and the TV are on the same network for the app to work.

Wireless Display

The Wireless Display feature enables you to mirror the display of a compatible device (such

as a smart phone, tablet or PC) on the TV screen by connecting your device to the TV

wirelessly. In order to use this feature, your device must support Wi-Fi Display technology.

NOTE: Make sure your devices support the correct Wireless Display technology.

1. To start using the Wireless Display feature, press OPTIONS , highlight Wireless

Display and press OK.

2. Turn on the Wireless Display (a.k.a. Wi-Fi Display, Wi-Fi Direct, Cast Screen)

function on your smart phone or tablet. (Please refer to your device’s user manual for

information on how to turn on wireless display.)

3. Your device will display a list of available devices. Choose ‘Smart TV’.

4. Your mobile device will connect to the TV and the TV then will display whatever is on

the screen of your device.

5. Use your device to disconnect.

Watching TV

Switching to DTV

If you are not in DTV Mode, switch to DTV by pressing the TV button on the remote control.

Alternatively, press the SOURCE button and select DTV, then press the OK button.

If you are in USB Mode, press the EXIT button to return to DTV Mode.

NOTE: ATV = Analogue TV. Analogue TV broadcasts may be available in some, but not all regions.

Choose ATV if you need to watch analogue TV channels.

Changing and Choosing Channels

To show a list of all available TV channels, press the CH LIST button. Use the ▲ / ▼

buttons to navigate the list and press OK to choose a channel.

To change channels according to their sequence in the channel list, press the CH+ or CH-

buttons to move to the next or previous channel.

If you have set some channels as “Favourites”, press the FAV button to show your shortlist

of Favourite channels. Use the ▲ / ▼ buttons to navigate the list and press OK to view.

(See “Program Edit” in the Menu Systems chapter for Favourites set up instructions.)

Program Info

Press the INFO button to display detailed program information on the screen. Press EXIT to

hide it again, or wait a few seconds for it to auto-hide.

Electronic Program Guide (EPG)

The EPG provides a detailed program schedule up to 7 days ahead for every digital TV

channel, provided by the broadcaster.

Press the GUIDE button to display the EPG. Use the ▲ / ▼/  /  buttons to navigate. The

schedule loads only after you have tuned into the corresponding frequency. If the schedule

looks empty for a particular channel after you scroll through the EPG’s channel list, press the

OK button to tune into the channel and the schedule should load at once.

To see more information on a program on the list, highlight it and press INFO. If the

description runs into multiple pages, use the ▲ / ▼ buttons to navigate the pages.

To skip forward 24 hours on the schedule display, press the GREEN button.

To skip backward 24 hours on the schedule display, press the YELLOW button.

Time-Shift Recording and Playback (in DTV mode only)

The time-shift function allows you to pause the live TV signal, then resume playback at your

convenience.

1. First, insert your USB memory device into the USB port.

2. When watching a programme in DTV Mode, press the button on the remote

control to initiate time-shift mode and pause the programme; the control bar pictured

below will appear on the screen and will disappear after a few seconds.

3. Press the button again on the remote control to resume playback. (Or press the

OK button to display the on-screen control bar and choose Play.) The TV is still

recording in time-shift mode.

4. To stop time-shift and return the the actual live broadcast, press the STOP button on

the remote control or the on-screen bar. Press the OK button to finish.

NOTE: The USB storage device will not retain time-shift data after exiting time-shift.

CAUTION: Do not disconnect the USB storage device while time-shift is in progress.

PVR

Instant recording

First, insert your USB memory device into the USB port. A USB flash drive or a hard disk

drive with an external power source is recommended.

CAUTION: Do not disconnect the USB storage device while recording is in progress. TEAC does not

take responsibility for lost data.

1. Tune in to the desired program on Digital TV.

2. Press the button on the remote control, then select PVR.

3. Press OK to start recording the program. The on-screen control bar will disappear

after a few seconds. It can be displayed with the OK button.

4. Choose Stop on the screen and then press the OK button. You will see the message

“Do you want to stop PVR?” Then select YES with the  button to stop PVR.

USB Media Playback

Note: To use these features, a compatible data storage unit (like a flash drive or hard disk

drive in FAT32 format) must be connected and running. NOT all USB devices, such as

phones, MP3 players, cameras, and the like, are compatible. We recommend using USB

Flash Drives, or external HDDs with a separate power supply.

Switching to USB Mode

1. Connect a USB device containing photo, music and/or movie files to the USB port on the

back or side panel of the TV.

2. Press , press ▲/▼/◄/► to select SOURCE > Media and then press OK. Or press

USB on the remote control.

Media File Playback

The Multimedia menu contains four submenus: My Movie, My Music, My Picture, and My

Browser.

My Movie

1. Select Multimedia > My Movie and press OK to confirm. Press ▲/▼/◄/► to select a

disk and press OK.

2. Press ▲/▼/◄ /► to highlight a video file and press OK to play it.

3. When the video is playing, you can:

• Press the VOL+/- button to adjust the volume, or press ▲/▼ to go to the

previous or next video.

• Press ◄ /► to fast forward/rewind. Press repeatedly to change the speed (2x

to 32x). After 32x, it returns to normal playback. You can also quite fast

forward/rewind by pressing the (PLAY/PAUSE) button.

• Press to show or hide the on-screen control menu at the bottom of the

screen. Press ◄/► to select buttons on the control menu, and press OK to

confirm. The control menu includes Play/Pause, FB., FF., Previous, Next,

Mode, Picture, Zoom, Info, Volume, Sound, and Stop.

4. To exit the current video and return to the video file list, press .

Page is loading ...

TEAC LE49E5S1UHD User manual

Brand: TEAC

Model: LE49E5S1UHD

Category: LCD TVs

Type: User manual

This manual is also suitable for

Download PDF

report

TEAC LE49E5S1UHD User manual

This manual is also suitable for

TEAC LE49E5S1UHD User manual

Related papers

Other documents