Angelcare AC-CAM-210 Owner's manual
- Category
- Baby video monitors
- Type
- Owner's manual
Angelcare AC-CAM-210
The Angelcare AC-CAM-210 Additional Camera Unit is compatible with the AC210 Baby Video Monitor. It allows you to add an extra camera to your monitoring system, giving you a view of your baby from multiple angles. The camera can be placed on a tabletop or mounted on a wall, and it features a magnetic mount for easy positioning. With its clear video and audio, the AC-CAM-210 helps you keep an eye on your little one, day or night.
Here are some of the key features of the Angelcare AC-CAM-210:
- High-quality video and audio for a clear view of your baby
- Magnetic mount for easy positioning on a tabletop or wall
Angelcare AC-CAM-210
The Angelcare AC-CAM-210 Additional Camera Unit is compatible with the AC210 Baby Video Monitor. It allows you to add an extra camera to your monitoring system, giving you a view of your baby from multiple angles. The camera can be placed on a tabletop or mounted on a wall, and it features a magnetic mount for easy positioning. With its clear video and audio, the AC-CAM-210 helps you keep an eye on your little one, day or night.
Here are some of the key features of the Angelcare AC-CAM-210:
- High-quality video and audio for a clear view of your baby
- Magnetic mount for easy positioning on a tabletop or wall
OWNER’S MANUAL
Additional Camera Unit AC-CAM-210
Compatible with AC210 Baby Video Monitor
TABLE OF CONTENTS
WARNINGS ......................................................................................................................................................................................................................2
SETUP REQUIREMENTS ............................................................................................................................................................................................................... 3
Setting up the Camera ............................................................................................................................................................................................................. 4
Limited warranty.........................................................................................................................................................................................................................7
Technical specifications ..........................................................................................................................................................................................................7
260AC_07_Manuel_AC-CAM-210_m2.indd 1 2018-09-21 8:50 AM
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY
BEFORE ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH OR DAMAGES TO
THE PRODUCT.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare
®
, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: Please contact us at:
info@angelcarebaby.com
Other countries: Please contact your local distributor:
international.angelcarebaby.com
WARNING
- Strangulation Hazard –
Children have STRANGLED in cords.
• KEEP the Camera and adaptor cords out of the reach of children more
than 3 feet or 1 metre away. • NEVER use extension cords with adaptors.
ONLY use adaptors provided. • is product is NOT a Toy. NEVER allow
children to play with it.
WARNINGS
Because of the serious strangulation risk to infant & toddlers, parents & caregivers should note the
following WARNINGS.
1. When an adapter is plugged into an electrical outlet, DO
NOT touch the exposed end.
2. ALWAYS be sure that both the transmitter and receiver
are working properly and are within range of each other. Test
the monitor before first use, periodically and when changing
location of the Camera.
3. DO NOT use monitor near water (such as bath tub, sink, etc.).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
4. Keep monitor AWAY from heat sources (such as stoves,
radiators, etc.).
5. ALWAYS place both the Camera and the Parent Unit on a flat
surface in an upright position and allow for proper ventilation.
DO NOT place on sofas, cushions, beds, etc. which may block
ventilation.
6. is monitor uses public airwaves to transmit signals. e
Parent Unit may pick up signals or interference from other
nursery monitors in your area. Your monitor may even be picked
up by other households. To protect your privacy, make sure
both units are turned OFF when not in use.
7. is product contains small parts. Adult assembly required.
Exercise care when unpacking and assembling the product
and keep small parts away from children.
8. When using the monitor, the room temperature should be
between 10°C and 40°C.
9. IMPORTANT SAFETY INSTRUCTIONS
9.1 Heed all warnings – All warnings on the product and in the
operating instructions should be adhered to.
9.2 Follow all instructions – All operating and use instructions
should be followed.
9.3 Water and moisture - DO NOT use this apparatus near
water. For example, near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet environment or near a swimming pool and
the like. Care should be taken so that objects DO NOT fall onto
units and that liquids are not spilled into either unit or Sensor
Pad through its openings.
9.4 Cleaning - Disconnect all units before cleaning. DO NOT
immerse in water any part of the monitor. Clean only with
dry cloth.
9.5 Ventilation - DO NOT block any ventilation openings. Allow
for proper ventilation when units are in use. DO NOT cover the
Camera or the Parent Unit with any object such as a blanket. DO
NOT place it in a drawer or in any location which would muffle
the sound or interfere with the normal flow of air.
9.6 Heat sources - DO NOT install near any heat sources such
as radiators, heat registers, stoves, TVs or other apparatus
(including amplifiers) that produce heat. Heat can damage
the case or electrical parts.
9.7 Power supply cord should be routed so that they are not
likely to be walked on or pinched by items upon or against them,
paying particular attention to cords and plugs, convenience
receptacle, and the point where they exit from the product.
To disconnect from mains, unplug the adapter.
9.8 Accessories - Only use attachments/accessories
specified by the manufacturer. DO NOT place this product on
an unstable cart, stand, tripod, bracket or table. e product
may fall, causing serious injury to a child or adult and serious
damage to the product. Use ONLY with a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold
with the product. Any mounting of the product should follow
the manufacturer’s instructions.
9.9 Unplug this appliance during lightning storms or when
not used for long periods of time.
9.10 Servicing - DO NOT attempt to service this product
yourself as opening or removing covers (except battery door)
may expose you to dangerous voltage or other hazards.
2
260AC_07_Manuel_AC-CAM-210_m2.indd 2 2018-09-21 8:50 AM
9.11 Replacement parts - When replacement parts are
required, be sure the replacement parts specified by the
manufacturer have the same characteristic as the original
part. Unauthorized substitution may result in fire, electric
shock or other hazards.
9.12 Overloading - DO NOT overload wall outlets, extension
cords or integral convenience receptacles as this can result
in a risk of fire or electric shock.
9.13 Object and Liquid Entry - NEVER push objects of any kind
into this product through casing slots as they may touch
dangerous voltage points or short out parts that could result
in a risk of fire or electric shock. NEVER spill liquid of any kind
on the product.
9.14 Power Lines - An outside antenna system should NOT be
located in the vicinity of overhead power lines or other electric
light or power circuit, or where it can fall into such power lines
or circuits as contact with them may be fatal.
AC-CAM-210
Additional Camera Unit compatible
with AC210 Baby Video Monitor
SETUP REQUIREMENTS
INCLUDED:
Wall-mount
with hardware
Camera Unit Tabletop stand
AC adapter
10. IMPORTANT SAFETY INSTRUCTIONS
RELATED TO USE OF BATTERIES
10.1 DO NOT use these adapters with any other equipment.
10.2 When unplugging the adapter from the Camera, be sure
it is switched to the OFF position.
3
E
N
260AC_07_Manuel_AC-CAM-210_m2.indd 3 2018-09-21 8:50 AM
SETTING UP THE CAMERA UNIT
1.1 SELECT A LOCATION FOR THE CAMERA UNIT
Camera can be installed on the wall (see included parts) or using the tabletop stand.
Both options include magnetic mount to get the best view of baby in cot.
Place the
Camera at least
1 metre from the
cot
WARNING
- Strangulation Hazard –
Children have STRANGLED in cords.
• KEEP the Camera and adaptor cords out of the reach of children more
than 3 feet or 1 metre away. • NEVER use extension cords with adaptors.
ONLY use adaptors provided. • is product is NOT a Toy. NEVER allow
children to play with it.
2
3
1) Place the Camera at a minimum
of 1 metre away from the cot.
2) Connect the adapter to the
Camera and into an electrical
outlet.
3) Adjust the Camera using the
magnetic mount to get the best
view of baby in the cot.
4
260AC_07_Manuel_AC-CAM-210_m2.indd 4 2018-09-21 8:50 AM
CAMERA
Power ON/OFF
indicator
Front Side
Speaker
Microphone
Camera
Micro USB
charging port
Rear
Magnet for
tabletop stand
POWER ON/OFF
Pairing button
1.2 PAIR THE CAMERA UNIT WITH THE PARENT UNIT
2
3
1) Turn the original Camera Unit OFF
(Camera Unit 1).
2) Turn the Parent Unit ON.
3) Press and hold the Zoom button
until the screen shows the Camera options.
4
5
4) Select the Camera Unit 2.
5) en select + sign.
e Parent Unit will display
a forward icon during the
reconnection procedure.
5
E
N
260AC_07_Manuel_AC-CAM-210_m2.indd 5 2018-09-21 8:50 AM
6
7
6) Turn your new Camera Unit (Camera 2) ON.
7) Press the Pairing button for 3 seconds
and release.
1.3 VIEWING MULTIPLE CAMERAS
With more than one camera you can view each camera individually or choose to scan every 10 seconds between
the paired cameras.
1
1) Press and hold the Zoom button until the screen
shows the Camera options.
2
2) With the left and right arrows, press Menu/Select
button to chose the Camera you wish to view or Scan
Mode (Parent Unit will scan between the Cameras
every 10 seconds).
Paired Camera will be
identify with a square.
IMPORTANT
• You will only be able to hear audio from one camera at a time.
6
260AC_07_Manuel_AC-CAM-210_m2.indd 6 2018-09-21 8:50 AM
TECHNICAL SPECIFICATIONS
Number of Channels:
USA/Canada: 19 channels.
Europe: 64 channels.
Power Supply:
100 - 240 VAC / 5 VDC adapter for the Camera Unit
Caution: To reduce the risk of electric shock, do not expose
this product to rain or moisture.
Transmission:
Data transmission between the Parent Unit and the Camera is
made on the 2.4 GHz frequency.
Maximum RF Power Transmitted = 20dBm (100mW)
Hereby, Angelcare Monitors Inc., declares that this Baby Monitor
is in compliance with Directive 2014/53/EU e full text of
the EU declaration of conformity is available at the following
internet address: international.angelcarebaby.com/
declaration-of-conformity.
ErP COMPLIANCE
USE ONLY THE FOLLOWING ANGELCARE
®
BRAND POWER SUPPLY MODEL
NUMBERS:
EUROPEAN UNION INCLUDING GERMANY K05S050060G
UK K05S050060B
PROTECT THE ENVIRONMENT
e wheelie bin symbols mean that according to local
laws and regulations your product and/or its battery
shall be disposed of separately from household waste.
When the product/battery reaches its end of life take it
to a collection point designated by local authorities. e
seperate disposal and recycling will help conserve natural
resources and protect human health and the environment.
Refer to User’s Guide for removal of batteries.
LIMITED WARRANTY
Angelcare
®
warrants to the original owner of this product that
Angelcare
®
monitor is free from any material and workmanship
defects for the term of the warranty period (see warranty
table below to determine the warranty for your country). If this
monitoring system fails to function properly when used as
directed under normal conditions and
during the warranty period, Angelcare
®
will either repair or
replace the product, at our discretion, free of charge. Please
contact your local distributor to validate warranty and warranty
period.
e product must be accompanied by a proof of purchase,
either a bill of sale or other proof that the monitoring system
is within the warranty period. Angelcare
®
will bear the cost of
repairing or replacing the product and shipping it back to you.
is warranty does not apply to a product which has
been damaged as a result of improper maintenance, an
accident, improper voltage supply or any other form of
misuse. e warranty is also void if the owner repairs
or modifies the product in any way. Angelcare
®
is not
liable for any incidental or consequential damages
with regard to this product. e warranty also excludes
any liability other than what is stated above. No other
warranty is given.
is warranty does not cover products and accessories which
are not Angelcare-branded, or
any problems that result from usage that is not in accordance
with product instructions, failure to follow the product
instructions, or problems caused by using accessories, parts or
components not supplied by Angelcare.
LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME
COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME
RESULTING FROM THE USE OF THIS PRODUCT.
IMPORTANT! is Angelcare
®
monitor monitor is a personal
care product. Please do not return this product to the store.
If you have questions or need help, please call your distributor
before returning
this product.
Please contact your local distributor for warranty
information. Find your local distributor by visiting our website:
international.angelcarebaby.com
See product for compliance marks specific to this device.
WARRANTY TERM PER COUNTRY
UK, South Africa, Russia 1 year
Other countries 2 years
7
E
N
260AC_07_Manuel_AC-CAM-210_m2.indd 7 2018-09-21 8:50 AM
IM1CAM210-ROW-170918
www.angelcarebaby.com
260AC_07_Manuel_AC-CAM-210_m2.indd 8 2018-09-21 8:50 AM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Angelcare AC-CAM-210 Owner's manual
- Category
- Baby video monitors
- Type
- Owner's manual
Angelcare AC-CAM-210
The Angelcare AC-CAM-210 Additional Camera Unit is compatible with the AC210 Baby Video Monitor. It allows you to add an extra camera to your monitoring system, giving you a view of your baby from multiple angles. The camera can be placed on a tabletop or mounted on a wall, and it features a magnetic mount for easy positioning. With its clear video and audio, the AC-CAM-210 helps you keep an eye on your little one, day or night.
Here are some of the key features of the Angelcare AC-CAM-210:
- High-quality video and audio for a clear view of your baby
- Magnetic mount for easy positioning on a tabletop or wall
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Angelcare AC6517 User manual
-
-
-
-
Angelcare AC517 Owner's manual
-
-
-
-
-
PABOB Angelcare AC327 User manual
