Product : Gamepad
Model Name : Max Fire G08XU
Model Number : G08XU
Version Number : 01
Service Guide
All manuals and user guides at all-guides.com
all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
2
Service Guide
Contents
1. Revision record --------------------------------------------------3
2. Maintain Guide --------------------------------------------------4
2.1 Introduction --------------------------------------------------4
2.2 Necessary tools ----------------------------------------------4
2.3 Safety attention ----------------------------------------------4
3. How to handle defective returns -----------------------------5
3.1 Procedure -----------------------------------------------------5
3.2 Problem description -----------------------------------------6
3.3 Problem solve ------------------------------------------------7
4. Assemble & Disassemble --------------------------------------9
4.1 How to Assemble and Disassemble the pad surface
--------------------------------------------------------------------9
4.2 How to Assemble and Disassemble the PCB -----------10
4.3 How to Replace the Resonator
---------------------------11
5. Appendix 1. Part list ------------------------------------------12
6. Appendix 2. Disassemble drawing -------------------------13
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
3
Service Guide
1. Revision Record
Date Version Name Approve
2003/5/6 1.0 Bam Niky
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
4
Service Guide
2. Maintain Guide
2.1 Introduction
Please pay attention to this guide, and follow the information to
prevent resulting damage.
This maintain-guide is against hardware problems of this pad.
2.2 Necessary tools
2.3 Safety attention
When staying for long time, please check electric and power circuit.
Place it in flat surface and prevent it from vibration.
Don’t drop and jolt this pad.
Don’t remove this pad from your PC when it is using.
Keep this pad away wet and high temperature.
Screwdriver
Tweezers
Solder
Solder torch
Tin-Sucker
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
5
Service Guide
3. How to handle defective returns
3.1 Procedure
Analyze possible
malfunction causes
Frame the solutions
and methods
Replace necessary
defective parts
Test all function to
check the pad is ok.
Return the pad to
customers
Received
Defective Pad
Test &Check
problem
Function NG
Function OK
Function OK
Function NG
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
6
Service Guide
3.2 Problem Description
Item Problem Description
3.2.1 No any work 1) The pad’s inner cable isn’t connected.
2) The pad’s electronic circuit is ok but still
no any work.
3.2.2 Some buttons
function wrong
1) The cords linked to PCB are
unconnected.
All manuals and user guides at all-guides.com
all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
7
Service Guide
3.3 Problem solve
3.3.1
No any work
Problem
Analyze the
problem
Judge the problem
causes
Solution
No any work
Resonator
Cable
1. Heavy dropped cause the
resonator broken.
2. Out of life
3. The cord is unconnected
1. Heavy dropped cause
the cable disconnected.
2. Wet causes the short
circuit.
1. Replace the resonator
2. Re-solder the cord
Re-solder the
cable
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
8
Service Guide
3.3.2 Some buttons’ function wrong
Problem
Analyze the
problem
Judge the problem
causes
Solution
Button’s function wrong
Cord
Button
1. The cord is broken.
1. The button is
loosened.
Re-solder the
cord
Re-set the button
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
9
Service Guide
4. Assemble & Disassemble
4.1 How to Assemble and Disassemble the pad surface
Procedure Graphics
1. Disassemble
1) Turn over the pad
2) Put the pad on a flat
3) Rotate screws
4) Separate pad’s covers
2. Assemble
1) Compose all parts according to
disassemble drawing
2) Lock all screws firmly
Attention:
When assembling the pad
surface, please put a cloth to
prevent it from rub.
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
10
Service Guide
4.2 How to Assemble and Disassemble the PCB
Procedure Graphics
1. Disassemble
1) Rotate the screws on the PCB
2. Assemble
1) Lock the screws
Attention:
When rotating PCB’s screws,
please take care other parts
connected PCB.
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
11
Service Guide
4.3 How to Replace the Resonator
Procedure Graphics
1. Remove
1) Suck the point of weld of the
Resonator by Tin-Sucker
2) Remove the defective Resonator
by Tweezers
2. Replace
1) Insert the same spec, complete
Resonator on the right hole
3. Solder
1) Solder the Resonator
2) Check all points of sold is ok
All manuals and user guides at all-guides.com
all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
12
Service Guide
5. Appendix 1. Part List
Item Part No. Name Quantity Station Spec.
1 14960040 Resonator 1 Y1 6MHz
2 22503603 Cord 2 SW5/SW6/SW7/SW8 3PIN,60mm,2MM
All manuals and user guides at all-guides.com
------------------------------------------------------ KYE SYSTEMS CORP.
13
Service Guide
6. Appendix 2. Disassemble Drawing
214G0821
241G0821
214G0811
24153012
414G084D1
217G081B
412G081D1
427G081D1
401G081D2
241G0811
414G082D1
414G083D1
401G082D2
All manuals and user guides at all-guides.com
/