DK Digital PU-500 Owner's manual

Brand: DK Digital

Model: PU-500

Type: Owner's manual

DK Digital PU-500

Below you will find brief product information for DK Digital PU-500. Please read the entire instruction manual for more detailed information and important safety notes.

The DK Digital PU-500 is a multifunctional device combining a precise clock with an alarm and stop watch functionalities. It is powered by two AAA batteries, one responsible for displaying the time and the other for powering the movement of the pendulum. The clock can display time in both 12-hour AM/PM and 24-hour formats, and the date including the day of the week is also shown on the display. The alarm function allows you to set an alarm time and choose whether you want to be woken up by an hourly chime or a beep at the selected time. The stop watch feature provides a 1/100 second precision and allows you to take intermediate times while the measurement is still running in the background.

DK Digital PU-500

Below you will find brief product information for DK Digital PU-500. Please read the entire instruction manual for more detailed information and important safety notes.

Battery replacement

The pendulum clock has two battery compartments.

The battery in the right compartment is responsible

for displaying the time, the one in the left

compartment for the movement of the pendulum. So

if the time display is not showing, replace the right

compartment battery or if the pendulum has stopped

moving, replace the left.

And this is how to do it:

Unscrew the screws fixing the battery

compartment cover using a small screw driver for

recessed-head screws.

Remove the battery compartment cover and take

out the battery.

Ø Insert a unused battery (1.5 V, size AAA, not

enclosed) according to the layout plan shown in

the battery compartment. When doing so, you

have to comply exactly with the correct polarity,

otherwise the clock will not function and may get

damaged.

To ensure a longer and more useful economic life,

you should use Alkaline batteries.

Close the battery compartment.

Batteries must not be disposed of in domestic

waste. Please hand in used batteries at the

proper collection point or at the place where

you have bought the new ones. Never throw

batteries into fire.

Setting the time and date

Press the SET key three times. When the seconds

flash you can reset them by pressing the UP key.

If you press the SHIFT key, the minutes start

flashing. Press the UP key repeatedly or keep it

pressed until the desired number of minutes is

displayed.

If you press the SHIFT key once again, the hours

start flashing. Press the UP key repeatedly until

the desired number of hours is displayed.

Initially the clock will display the time in the

English 12-hour AM/PM format. If you want to use

this format, make sure that the “A” (=AM) or “P”

(=PM) is shown under the hours.

If you want to display time in the 24-hour format,

continue pressing the UP key until “H” is shown

under the time. Now set the hours in 24-hour

mode.

Press the SHIFT key once again and the days start

flashing. Press the UP key until the desired day is

shown.

If you press the SHIFT key once again, the months

start flashing. Press the UP key until the desired

month is shown.

If you press the SHIFT key again, a frame will flash

that later marks the day of the week. Press the UP

key several times in order to select the suitable

frame for the day of the week.

In order to complete the setting, press the SET

key. Now, the time is shown in the display.

In order to show the date during normal time

display, press the UP key. If you release the key,

time is shown again.

Controlling the alarm function

Press the SET key twice. The alarm time hours will

flash and you can set them to the desired value by

pressing the UP key. The time format corresponds

to the format you have chosen when setting the

time.

If you press the SHIFT key, the alarm time minutes

will flash . Press the UP key until the desired

number of minutes in the alarm time is shown.

Press the SET key once again in order to save the

alarm time. In the display, the alarm symbol

appears. At the selected time, you will hear a

beep.

Press then the SHIFT key in order to stop the

alarm. Or press the UP key in order to discontinue

the alarm for 5 minutes.

In order to show the alarm time during normal

time display, press the SHIFT key. If you release

the key, the time is shown again.

In order to deactivate the alarm function, press

the SHIFT and the UP key simultaneously. The

alarm symbol disappears from the display.

Chime

The device can issue a short beep on the hour, every hour.

To activate or deactivate this function when

normal time is displayed, hold down the SHIFT key

and additionally press the SET key once.

If the days of the week are shown in a frame, the

function is active. If the frame is not shown, there

is no hourly beep.

Stop watch

You can also use this device as a stop watch with a

1/100 second precision.

Press the SET key once - 0:00 appears.

Press the UP key in order to start the time

measurement. If you press the UP key again, the

measurement is stopped. Press again in order to

continue.

If you press the SHIFT key during measurement,

the time you have reached will be shown. The time

measurement is, however, continuing in the

background. Using this function, you can

comfortably determine intermediate times.

Press the SHIFT key once again in order to return

to the current time measurement.

You can also press the SET key three times in order

to return to normal time display and the

measurement continues.

In order to reset the stop watch to 0:00, stop it with

the Up key and then press the STOP key.

Waste disposal

When the operating life of this

device has ended it must not be

disposed as domestic waste, but in

accordance with national

environmental guidelines.

We reserve the right to correct errors and make

technical alterations.

manual as a whole nor excerpts may be reproduced without

our prior written permission.

DK digital AG

40878 Ratingen

Germany

www.dk-digital.com

DK Digital PU-500 Owner's manual

Brand: DK Digital

Model: PU-500

Type: Owner's manual

DK Digital PU-500

Below you will find brief product information for DK Digital PU-500. Please read the entire instruction manual for more detailed information and important safety notes.

Download PDF

report

DK Digital PU-500 Owner's manual

DK Digital PU-500 Owner's manual

Related papers

Other documents