1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
12' Vega Video Camera Jib Crane for Video makers
& Filmmakers (JB-VG12-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Vega Jib Front Secon
Assembly Manual
Vega Jib Middle Secon
Vega Jib End Secon
Handle
3/16mm
Allen Key
1/4 to 3/8
Converter
2 x Allen Bolts
With Washers
2
• Aer opening the end secon, loosen the
boom and side knobs of the Central Fork.
• The end secon is properly open, now.
Feature: Central Fork mechanism facilitates
ultra-smooth pan-lt movements while
absorbing unwanted vibraons for cleaner
shots.
• Mount the end secon of the Vega Jib on
the Jib Stand (Not Included).
End Secon Assembly
Vega Jib Setup
• Completely stretch and open the end
secon of Vega Jib, as shown in the image.
• Aer mounng the end secon, ghten the
knob while aligning the holes with each
other.
• Loosen and remove the top knob of the end
secon.
3
• The central part has connecng bars
aached at both the ends, slide the middle
secon into the slots of the end secon.
• Aer sliding the middle secon into the slot
of the end secon, insert the locking knob
in the threads present on top and boom of
the secon.
• Tighten the knobs to completely secure the
secon.
Middle Secon Assembly
• Loose and remove the Center knob of end
secon.
• Now, loosen and remove the top knob of
middle secon.
• The front secon has connecng bars
aached at both ends, slide the front
secon into the slots of the middle secon.
Front Secon Assembly
4
• To detach the handles from one another,
loosen them by turning them in circular mo-
on
Feature: The Camera Crane can be controlled
and moved with the help of a handle.
• Remove the washer from the handle.
• Insert the handle into the hole at the end
secon of the Vega Jib, as shown in the im-
age.
• Aer inserng the handle, aach the han-
dle to the jib from the other side.
Handle Assembly
• Tighten the locking knobs to secure the Jib
secons.
• Aach the handle with each other.
• Mount the Quick Release Plate
(Not Included) on the Camera mounng
plate of the Vega Jib.
• Aer mounng the Quick Release Plate
(Not Included), insert the bolts from the
boom side of the Camera mounng plate.
5
• Now, the Gimbal (Not Included) is complete-
ly secured, as shown in the image.
Camera Mounng Plate
• Insert a 1/4" bolt from the boom of the
extension Camera plate to secure the Quick
Release Plate (Not Included) and ghten
with the Allen key.
• Unlock the lever lock of the quick release
plate.
• Insert the weight (Not Included) inside the
weight Rod.
NOTE: Use the weights according to your cam-
era weight set up requirements.
• Slide the Gimbal (Not Included) onto the
Quick Release Plate and lock it using the
locking lever.
• Monitor (Not Included) each frame by
aaching a monitor to the Jib using the
oponal Universal Clamp with
13"arculang double arms and 3/8"-16
Threaded Stud.
6
YOUR PROAIM 12' VEGA VIDEO CAMERA JIB CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
/
