Printek FormsPro 5100 Installation guide

Printek
Brand
Printek
Model
FormsPro 5100
Type
Installation guide

This manual is also suitable for

FormsPro 5102 Optional Front Tractor Installation Guide
Drivers, User Manuals, and SW Utilities available @ www.printek.com
Power off the printer before installing the optional front tractor.
Installing Tractor – Raise the front cover.
Remove the bottom cover.
Installation must be performed with the gear on the
tractor on the right side.
Insert the tractor with the rails on the left and right in
parallel to the stop in the guides provided on the printer
until they engage.
Note: Loading paper is described in chapter Loading
paper (operator’s manual).
Reinstall the bottom cover and close the front cover.
*Note: If you want to insert paper into
tractor 1, you have to remove tractor 2
first.
Preparing the Printer – Select the Tractor2 parameter with the paper path quick selection feature (see operator’s manual Changing the paper type), in the Setup menu of the printer (see
operator’s manual Setup mode) or via an application program.
Copyright © 2018 Printek, LLC
A Company
3515 Lakeshore Dr.
St. Joseph, MI 49085
Phone: 800-368-4636
www.printek.com
Part Number 7699 Rev. B
  • Page 1 1

Printek FormsPro 5100 Installation guide

Printek
Brand
Printek
Model
FormsPro 5100
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents