Printek 5102 Printers, FormsPro 5100 Installation guide

Hello! I've analyzed the provided installation guide for the PRINTEK 5102 front tractor. This document describes the process of installing the optional front tractor, including important notes about paper loading. I'm here to help answer any questions you might have about this process, so feel free to ask!
What should I do before installing the front tractor?

Which side should the gear be on when installing the tractor?

What should I do if I want to insert paper into tractor 1?

FormsPro 5102 Optional Front Tractor Installation Guide

Drivers, User Manuals, and SW Utilities available @ www.printek.com

Power off the printer before installing the optional front tractor.

Installing Tractor – Raise the front cover.

Remove the bottom cover.

Installation must be performed with the gear on the

tractor on the right side.

Insert the tractor with the rails on the left and right in

parallel to the stop in the guides provided on the printer

until they engage.

Note: Loading paper is described in chapter Loading

paper (operator’s manual).

Reinstall the bottom cover and close the front cover.

*Note: If you want to insert paper into

tractor 1, you have to remove tractor 2

first.

Preparing the Printer – Select the Tractor2 parameter with the paper path quick selection feature (see operator’s manual Changing the paper type), in the Setup menu of the printer (see