Instruction Manual
5
CONTROLS/SETTINGS :
Before first use:
• Do not place this appliance near human body to avoid discomfort of human body
• Do not place this appliance near wooden furniture to prevent furniture become damp and damages
• Place this appliance evenly and keep distance from wall at least 30cm to keep it running normally.
Attention: before use, please check ultrasonic transducer first. When ultrasonic transducer is damaged, do
not use this appliance
USE
1. Be sure the humidifier is switched off (knob turned all the way to the left)
2. Separate the tank from the base of the unit
3. Turn over the tank and unscrew the Valve.
4. Fill the tank with tap or distilled water
5. Closed the valve tightly, then turn the water tank over and set on the humidifier base.
N.B.: Wait a few seconds before the base of the humidifier is filled with water
6. Plug your appliance into a wall outlet using the power cord.
7. Turn the unit on, and turn the Volume Control knob clockwise, and the LED indicator would turn to
green color. Turning the knob all the way to the right will produce the highest moisture. Turning to
the left will produce lower moisture with longer run time.
8. then point the vapor in the desired direction using the cover.
N.B.: ensure that the vapor is not directed toward a wall socket or other electrical device.
9. When the humidifier runs out of water, the LED indicator will turn to red, the transducer and fan
will automatically shut off. Once the tank is empty, turn the Power Off and unplug the unit.
10. There is an aroma box in the mist nozzle, you can open the nozzle and put few drops of essential oil
in the sponge, then fix the nozzle. When the humidifier is turn on, the aroma would come out
together with the mist.
Power indicator/Water
shortage indicator
Night light button
Power knob/Volume control
knob