2. Deagostini
  3. HMS Victory Cross-Section

Deagostini HMS Victory Cross-Section Template

  • I have reviewed the instructions for the Rib assembly plan. This document provides guidance on how to construct the ribs of the HMS Victory using a full-sized plan. I am ready to assist with any questions you may have about the assembly process.
  • What is this plan for?
    What should I do before assembling the ribs?
    Why are some ribs split?
HMS Victory
rib aSSeMbly plan
shown full size
Use this plan to assemble the ribs for HMS Victory’s cross-section.
As shown in the instructions, tape this plan to a board or other at
surface and cover with a plastic lm to prevent the glue from sticking.
Then carefully assemble the separate pieces so that they t exactly
over the plan. This will ensure that all your ribs are the correct shape
and give you the perfect basis for assembling the hull.
Note that (as explained in the instructions) some ribs do not form
one continuous section, as they are split by the gun and entry ports.
HMSV_121_Rib_assembly_plan.indd 1 19/07/2012 13:14
/