Tranberg TEF 2500 030/50 User manual

Brand
Tranberg
Model
TEF 2500 030/50
Type
User manual

Tranberg TEF 2500 030/50 is a halogen floodlight with a maximum power of 500W, designed for use in various applications such as ships, yachts, fishing vessels, offshore and industrial installations, and public areas. It features a stainless steel housing, glass-holding frame, latches, and bracket, along with a powder-coated casing (RAL 9018) and a hard glass pane that is resistant to temperature changes. The floodlight operates on an input voltage of 230V AC 50/60Hz and utilizes an R7s lamp holder.

Tranberg TEF 2500 030/50 is a halogen floodlight with a maximum power of 500W, designed for use in various applications such as ships, yachts, fishing vessels, offshore and industrial installations, and public areas. It features a stainless steel housing, glass-holding frame, latches, and bracket, along with a powder-coated casing (RAL 9018) and a hard glass pane that is resistant to temperature changes. The floodlight operates on an input voltage of 230V AC 50/60Hz and utilizes an R7s lamp holder.

R. Stahl Tranberg AS
E [email protected] | stahl-tranberg.com
Main office: Strandsvingen 6 | N-4032 Stavanger | Norway | T +47 51 57 89 00 | F +47 51 57 89 50
Office Oslo: Luhrtoppen 2 | N-1470 Lørenskog | Norway | T +47 24 08 44 10
IMPORTANT
Read this instruction carefully before installing the
product
LIGHTING
TEF 2500 030/50 FLOODLIGHT
HALOGEN MAX. 500W
SAFE AREA
USER MANUAL
Subject to change without prior notice TUM1014 REV. C 14.07.2017
TEF 2500 030/50 HALOGEN FLOODLIGHT MAX. 500W USER MANUAL
INTRODUCTION
Thank you for purchasing this product!
For installation, maintenance and assurance of a long life
of this product, please follow this manual.
CONTENT IN BOX
The product is fully assembled, and ready for installation.
SAFETY PRECAUTIONS
Note that changes made to the product and/or installation
of components which do not conform to the approval,
may be a safety violation. The manufacturer will in no
circumstance be held responsible for such activity.
For your health and safety, always use safety gear suited
for the task. Be certain to follow codes, regulations and/or
specific procedures that are related to the installation.
TOOLS REQUIRED
Regular tools required for installation:
• Flat small screwdriver
• PH 1 screwdriver
• Wrench or similar for fastening the lamp
MAINTENANCE INSTRUCTIONS
The light should be inspected according to Company
routines. The manufacturer suggests regular check for
water intrusion/condensation which should be removed
immediately. Check the drain plug / drain hole function.
When cleaning, use only mild detergents. Alcohol or
petroleum based products may damage lens, paint or
plastic components.
APPLICATIONS
• Ships
• Yachts
• Fishing vessels
• Offshore and industrial installations
• Public areas
APPROVALS
NA
TEF 2500 030/50 HALOGEN FLOODLIGHT MAX. 500W USER MANUAL
INSTALLATION INSTRUCTIONS
SPARE PARTS
Description Part No.
Stainless steel glass-holding frame complete with U-profile silicone gasket 5045 0024
Hard glass pane 200 x 325 x 4mm 5045 0018
U-profile silicone gasket 209 x 338mm 5045 0025
Pair of lamp holder R7s 5045 0023
Mounting arrangement
230 VAC (2500 020)
24 VAC (2500 022)
LAMP
LAMP 230 VAC
Cable glands
The installated cable gland is suited for cables with
diameters ranging from 8,5 to 13,5mm.
A replacement kit is supplied and should be used for cable
diameters ranging from 13 to 17mm.
Be sure to install the cable in a way wich prevents water
to penetrate into the enclosure through the cable gland
R. Stahl Tranberg AS
E [email protected] | stahl-tranberg.com
Main office: Strandsvingen 6 | N-4032 Stavanger | Norway | T +47 51 57 89 00 | F +47 51 57 89 50
Office Oslo: Luhrtoppen 2 | N-1470 Lørenskog | Norway | T +47 24 08 44 10
TEF 2500 030/50 HALOGEN FLOODLIGHT MAX. 500W USER MANUAL
TECHNICAL DATA
Housing: Glass-holding frame, latches and bracket made out of stainless steel,
Powercoated (RAL 9018) casing. Hard glass pane, resistant against
temperature changes
Input voltage: 230V AC 50/60Hz
Lamp: Halogen 300-500W (Option: Narrow beam)
Lamp holder: R7s
Mounting: One mounting hole, Ø13mm
IP-rating: IP67 ( According to EN60529)
Standard cable entries: Brass M24 cable glands
Cable: 8,9 - 10,4mm
Weight: 4,8 kg.
DESCRIPTION
Part No.
Halogen floodlight 300W, 230V AC 50/60Hz Wide beam 2500 030
Halogen floodlight 300W, 230V AC 50/60Hz Wide beam 2500 050
*Narrow beam on request
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Tranberg TEF 2500 030/50 User manual

Brand
Tranberg
Model
TEF 2500 030/50
Type
User manual

Tranberg TEF 2500 030/50 is a halogen floodlight with a maximum power of 500W, designed for use in various applications such as ships, yachts, fishing vessels, offshore and industrial installations, and public areas. It features a stainless steel housing, glass-holding frame, latches, and bracket, along with a powder-coated casing (RAL 9018) and a hard glass pane that is resistant to temperature changes. The floodlight operates on an input voltage of 230V AC 50/60Hz and utilizes an R7s lamp holder.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents