WaterWay 810-1025 User manual

  • Hello! I've reviewed the user manual for the Waterway Swim Spa. This document explains how to operate the swim pumps, adjust speed settings, and program swim workouts. I'm ready to answer your questions about using your Waterway Swim Spa based on the provided instructions.
  • How do I turn on the swim pumps?
    How do I select the speed for the swim pumps?
    How do I turn on the Swim Workout mode?
    How can I change the speed for one mode while in use during swim workout?
1. Touch the SWIM WORKOUT
icon to turn the pumps ON – the
SWIM WORKOUT icon on the LCD
screen will turn orange.
The Swim Workout cycle will run
progressing through each of up to 10
pre-programmed cycles until it is
complete, then it will turn OFF.
1. Touch the SWIM icon to
turn the Variable Speed Swim pumps
ON – the SWIM icon on the LCD
screen will turn yellow.
2. Touch the PERCENT
and swipe up or down to select
the speed you want. Then touch
SELECT. Select
3.Touch the SWIM icon again
to turn OFF the pump – the yellow
SWIM icon on the LCD screen will
turn OFF.
SWIM SPA / SWIM WORKOUT INSTRUCTIONS
2. To change the speed for just one
mode while in use touch the
PERCENT. Then swipe up
or down to select the speed you
want. Touch SELECT. That
speed will run for this preset only.
Select
3.Touch SWIM WORKOUT icon
again to turn OFF the pumps – the
SWIM WORKOUT icon on the LCD
screen will turn OFF.
30
%
30
%
SWIM SPA / SWIM INSTRUCTIONS
SWIM SPA / SWIM WORKOUT PROGRAMMING
2. Swipe up or down to select the
PRESET #, DURATION and SPEED.
3. Select SAVE to save your
settings.
1. To program SWIM WORKOUT, swipe
to the left.
Select the TIMER icon.
Swipe down.
Select SWIM WORKOUT.
4. Select HOME to return to the
HOME screen and start your workout.
Designed,
Engineered &
Manufactured
in the USA.
810-1025.0618 ©2018 Waterway Plastics
2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
[email protected] • www.waterwayplastics.com
/