Pittsburgh Automotive Item 61176 Owner's manual

Category
Power tools
Type
Owner's manual

This manual is also suitable for

Page2 For technical questions, please call 1-800-444-3353. Item61176
SAFETY OPERATION MAINTENANCESETUP
Table of Contents
Safety.................................................2
Specifications.....................................6
Setup..................................................7
Operation............................................7
Maintenance.......................................9
PartsListandDiagram......................10
Warranty............................................12
WARNING SYMBOLS AND DEFINITIONS
Thisisthesafetyalertsymbol.Itisusedtoalertyouto
potentialpersonalinjuryhazards.Obeyallsafetymessages
thatfollowthissymboltoavoidpossibleinjuryordeath.
Indicatesahazardoussituationwhich,ifnotavoided,
willresultindeathorseriousinjury.
Indicatesahazardoussituationwhich,ifnotavoided,
couldresultindeathorseriousinjury.
Indicatesahazardoussituationwhich,ifnotavoided,
couldresultinminorormoderateinjury.
Addressespracticesnotrelatedtopersonalinjury.
IMPORTANT SAFETY INFORMATION
General Power Tool Safety Warnings
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term ″power tool″ in the warnings refers to your mains-operated (corded) power tool.
Work area safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
3. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
4. NEVER use this Vacuum Pump to vent
refrigerants into the air. It is illegal and
harmful to the environment to do so.
Page3For technical questions, please call 1-800-444-3353.Item61176
SAFETYOPERATIONMAINTENANCE SETUP
Electrical safety
1. Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs
with grounded power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
2. Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
3. Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
4. When operating a power tool outdoors,
use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
5. If operating a power tool in a damp
location is unavoidable, use a Ground
Fault Circuit Interrupter (GFCI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
Personal safety
1. Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may
result in serious personal injury.
2. Use personal protective equipment.
Always wear eye protection.
Safetyequipment such as dust mask,
non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
3. Only use safety equipment
that has been approved by an
appropriate standards agency.
Unapproved safety equipment may
not provide adequate protection.
Eye protection must be ANSI-approved
and breathing protection must be
NIOSH-approved for the specific
hazards in the work area.
Power tool use and care
1. Use the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
2. Do not use the power tool if the Switch
does not turn it on and off.
Any power tool that cannot be
controlled with the Switch is
dangerous and must be repaired.
3. Disconnect the plug from the power
source before making any adjustments,
changing accessories, or storing
power tools.Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power tool
or these instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.
Page4 For technical questions, please call 1-800-444-3353. Item61176
SAFETY OPERATION MAINTENANCESETUP
5. Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Vacuum Pump Specific Safety Warnings
1. Avoidoverfilling.Donotserviceair
conditioningsystemsimproperly.
2. WearANSI-approvedsafetygoggles
duringsetupand/oruse.
3. Certificationisrequiredbylawfor
techniciansopeningrefrigerationcircuit.
4. Useindrylocationsonly.
5. Donotcoverthisunit.ThisVacuum
Pumpgetsveryhotwheninuse.Do
notusenearcombustiblesandallowthe
unittocooldowncompletelyafterusing,
and/orbeforemovingorstorage.
6. Maintainlabelsandnameplatesonthetool.
Thesecarryimportantsafetyinformation.
Ifunreadableormissing,contact
HarborFreightToolsforareplacement.
7. Donotleavethetoolunattendedwhen
itispluggedintoanelectricaloutlet.
Turnoffthetool,andunplugitfrom
itselectricaloutletbeforeleaving.
8. Thisproductisnotatoy.
Keepitoutofreachofchildren.
9. WARNING:Thebrasscomponentsofthis
productcontainlead,achemicalknownto
theStateofCaliforniatocausebirthdefects
(orotherreproductiveharm).
(CaliforniaHealth&SafetyCode
§25249.5,et seq.)
10.WARNING:Handlingthecordonthisproduct
willexposeyoutolead,achemicalknown
totheStateofCaliforniatocausecancer,
andbirthdefectsorotherreproductiveharm.
Washhandsafterhandling.
(CaliforniaHealth&SafetyCode
§25249.5,et seq.)
11.Peoplewithpacemakersshould
consulttheirphysician(s)beforeuse.
Electromagneticfieldsincloseproximityto
heartpacemakercouldcausepacemaker
interferenceorpacemakerfailure.
Inaddition,peoplewithpacemakersshould:
•Avoidoperatingalone.
•Properlymaintainandinspecttoavoid
electricalshock.
•Properlygroundpowercord.
GroundFaultCircuitInterrupter(GFCI)
shouldalsobeimplemented–itprevents
sustainedelectricalshock.
12.Thewarnings,precautions,andinstructions
discussedinthisinstructionmanualcannot
coverallpossibleconditionsandsituations
thatmayoccur.Itmustbeunderstoodbythe
operatorthatcommonsenseandcautionare
factorswhichcannotbebuiltintothisproduct,
butmustbesuppliedbytheoperator.
SAVE THESE INSTRUCTIONS.
Page5For technical questions, please call 1-800-444-3353.Item61176
SAFETYOPERATIONMAINTENANCE SETUP
Grounding
TO PREVENT ELECTRIC SHOCK AND DEATH
FROM INCORRECT GROUNDING WIRE CONNECTION:
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the power cord or
plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will
not fit the outlet, have a proper outlet installed by a qualified electrician.
Grounded Tools: Tools with Three Prong Plugs
3-Prong Plug and Outlet
1. Toolsmarkedwith“GroundingRequired”
haveathreewirecordandthreeprong
groundingplug.Theplugmustbeconnected
toaproperlygroundedoutlet.Ifthetool
shouldelectricallymalfunctionorbreak
down,groundingprovidesalowresistance
pathtocarryelectricityawayfromtheuser,
reducingtheriskofelectricshock.
2. Thegroundingprongintheplugis
connectedthroughthegreenwireinside
thecordtothegroundingsysteminthetool.
Thegreenwireinthecordmustbe
theonlywireconnectedtothetool’s
groundingsystemandmustneverbe
attachedtoanelectrically“live”terminal.
3. Thetoolmustbepluggedintoanappropriate
outlet,properlyinstalledandgroundedin
accordancewithallcodesandordinances.
Theplugandoutletshouldlooklikethosein
theprecedingillustration.
(See 3-Prong Plug and Outlet.)
Extension Cords
1. Groundedtoolsrequirea
threewireextensioncord.
Double Insulatedtoolscanuseeither
atwoorthreewireextensioncord.
2. Asthedistancefromthesupplyoutlet
increases,youmustuseaheaviergauge
extensioncord.Usingextensioncordswith
inadequatelysizedwirecausesaserious
dropinvoltage,resultinginlossofpower
andpossibletooldamage.(See Table A.)
3. Thesmallerthegaugenumberofthewire,
thegreaterthecapacityofthecord.For
example,a14gaugecordcancarryahigher
currentthana16gaugecord.(See Table A.)
4. Whenusingmorethanoneextensioncord
tomakeupthetotallength,makesure
eachcordcontainsatleasttheminimum
wiresizerequired.(See Table A.)
5. Ifyouareusingoneextensioncordformore
thanonetool,addthenameplate amperes
andusethesumtodeterminetherequired
minimumcordsize.(See Table A.)
6. Ifyouareusinganextensioncord
outdoors,makesureitismarkedwiththe
suffix“W-A”(“W”inCanada)toindicate
itisacceptableforoutdooruse.
Page6 For technical questions, please call 1-800-444-3353. Item61176
SAFETY OPERATION MAINTENANCESETUP
7. Makesuretheextensioncordisproperly
wiredandingoodelectricalcondition.
Alwaysreplaceadamagedextension
cordorhaveitrepairedbyaqualified
electricianbeforeusingit.
8. Protecttheextensioncordsfrom
sharpobjects,excessiveheat,
anddamporwetareas.
Table A: Recommended Minimum
Wire Gauge for Extension Cords*
(120/240 Volt)
NAMEPLATE
AMPERES
(at full load)
EXTENSION CORD
LENGTH
25´
50´
75´
100´
150´
0–2.0 18 18 18 18 16
2.1–3.4 18 18 18 16 14
3.5–5.0 18 18 16 14 12
5.1–7.0 18 16 14 12 12
7.1–12.0 18 14 12 10 -
12.1–16.0 14 12 10 - -
16.1–20.0 12 10 - - -
* Based on limiting the line voltage drop to
five volts at 150% of the rated amperes.
Symbology
DoubleInsulated
CanadianStandardsAssociation
UnderwritersLaboratories,Inc.
V
Volts
~
AlternatingCurrent
A
Amperes
n
0
xxxx/min.
NoLoadRevolutions
perMinute(RPM)
WARNINGmarkingconcerning
RiskofEyeInjury.
WearANSI-approvedsafety
goggleswithsideshields.
Readthemanualbefore
set-upand/oruse.
WARNINGmarkingconcerning
RiskofFire.
Donotcoverventilationducts.
Keepflammableobjectsaway.
WARNINGmarkingconcerning
RiskofElectricShock.
Properlyconnectpower
cordtoappropriateoutlet.
Specifications
ElectricalRating 120V~/60Hz/5A
AirDisplacement 3CFM
Fittings R134AandR12/R22
UltimateVacuum 22.5micron(3Pascal)
OilCapacity 6.8Ounces(200ml)
WorkingPressure 15PSI
231672
VE225
Page7For technical questions, please call 1-800-444-3353.Item61176
SAFETYOPERATIONMAINTENANCE SETUP
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Functions
Inlet
Fittings
Switch
(hidden from
this angle)
Oil Fill
Plug
Oil Drain
Plug
Oil Sight
Glass
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Tool Set Up
1. BeforeoperatingtheVacuumPump,
checktheoillevelbyplacingthe
VacuumPumponaflat,levelsurface.
ObservetheOilSightGlass.Theoilshould
beatthefilllineontheOilSightGlass.
2. Ifoilisneeded,unscrewtheOilFillPlugand
addoilthroughtheholeunderthefitting.
Usealowviscosityvacuumpumpoil
(i.e.,HFV-46).
3. Inspectthesealing“O”Ringeachtimethe
OilFillPlugisremoved.Lookforpossible
tears,cracks,ordamage.Replaceifneeded.
4. ReplacetheOilFillPlugand
tightensecurelytopreventoilfrom
escapingunderpressureduringuse.
OPERATION
Page8 For technical questions, please call 1-800-444-3353. Item61176
SAFETY OPERATION MAINTENANCESETUP
Workpiece and Work Area Set Up
1. Designateaworkareathatisclean
andwell-lit.Theworkareamustnot
allowaccessbychildrenorpetsto
preventdistractionandinjury.
2. Vehicleexhaustfumesandaccumulated
refrigerantgascankillyou.Donotoperate
vehicle’sengineorserviceairconditioner
inenclosedorpoorlyventilatedarea.
3. Routethepowercordalongasaferoute
toreachtheworkareawithoutcreatinga
trippinghazardorexposingthepowercord
topossibledamage.Thepowercordmust
reachtheworkareawithenoughextralength
toallowfreemovementwhileworking.
4. Setthevehicle’sparkingbrake,
blockthetires,andsetthevehicle’s
transmissiontoneutralorpark.
General Operating Instructions
TO PREVENT SERIOUS INJURY AND DEATH FROM EXPLOSION:
Service of air conditioning systems must be done only by trained
and experienced technician to avoid overfilling.
Technicians opening refrigeration circuit in automotive air conditioning systems MUST be
certified in refrigerant recovery and recycling procedures in compliance with section 609 of
Clean Air Act Amendments of 1990. For additional information regarding ozone depletion
and air conditioning service regulations, visit EPA’s website: www.epa.gov/ozone
1. BeforeoperatingtheVacuumPump,
checktheoillevelasexplainedunder
Tool Set Uponpage7.
2. UseonlyoneInletFittingatatime.Keep
theotherFittingcappedwhilenotinuse.
3. Turnthevehicle/appliance
andACsystemOFF.
4. Asappropriate,attachtheR-12,
R-22,orR-134AmanifoldtotheAC
drainportofthevehicle/appliance.
Thisisa“quickrelease”fitting.Thedrain
portisgenerallythelowerofthetwomanifold
portsandwillbelocateddownstreamfrom
thecompressorinthevehicle/appliance.
Refertothevehicle/applianceowner’s
manualforvehicle-specificinformation.
5. AttachanACrefrigerantrecovery
systemanddraintherefrigerant.
6. Afterreaching26to28in/hgvacuum,
stopanddisconnecttherecoverysystem.
7. AttachthisVacuumPumpandrun
for10minutestofurtherraisethe
vacuumlevelinsidetheACsystem.
8. TurntheSwitchON.
9. Thevacuumwillbuildforapproximately
2minutesbeforereachingfullpower.
AllowthePumptooperateforapproximately
10minutestothoroughlyremoveall
moistureandgasfromthesystem.
10.TheGauge(notincluded)shouldshow
negativepressureandmaintainthatreading
for10minutes.If,duringthattimethe
pressurereadingrisesbacktoward“0”,
theremaybealeakinthesystem.
11.CloseallvalvesontheManifold
(soldseparately),andturntheSwitchOFF
beforedisconnectingthehose
fromthevacuumfitting.
12.Topreventaccidents,unplug
thePowerCordafteruse.
13.AllowtheVacuumPumptocompletely
coolbeforewipingdownandstoring
indoorsoutofchildren’sreach.
NOTE:Theprocessisthesameforbothvehicleandotherrefrigerationsystems.
Page9For technical questions, please call 1-800-444-3353.Item61176
SAFETYOPERATIONMAINTENANCE SETUP
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE,inspectthegeneral
conditionofthetool.Checkfor:
• loosehardware,
• misalignmentorbindingofmovingparts,
• crackedorbrokenparts,
• damagedelectricalwiring,and
• anyotherconditionthatmay
affectitssafeoperation.
2. AFTER USE,wipeexternalsurfaces
ofthetoolwithcleancloth.
3. WARNING! If the supply cord
of this power tool is damaged,
it must be replaced only by a
qualified service technician.
Troubleshooting
Problem Possible Causes Likely Solutions
Toolwillnotstart. 1. Cordnotconnected.
2. Nopoweratoutlet.
3. Internaldamage
orwear.
(Carbonbrushesor
switch,forexample.)
1. Checkthatcordispluggedin.
2. Checkpoweratoutlet.Ifoutletisunpowered,
turnofftoolandcheckcircuitbreaker.
Ifbreakeristripped,makesurecircuitisright
capacityfortoolandcircuithasnootherloads.
3. Havetechnicianservicetool.
Tooloperates
slowlyor
overheats.
Extensioncordtoolong
orwiresizetoosmall.
Eliminateuseofextensioncord.
Ifanextensioncordisneeded,useshorter/
heaviergaugecord.SeeExtension Cords
inGroundingsectiononpage5.
Excessivenoise
orrattling.
Internaldamageorwear.
(Carbonbrushesor
bearings,forexample.)
Havetechnicianservicetool.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect power supply before service.
Page10 For technical questions, please call 1-800-444-3353. Item61176
SAFETY OPERATION MAINTENANCESETUP
Part Description
1 FanCover
2 CrossScrew
3 ShaftRetainingRing
4 Fan
5 MotorCover
6 WaveWasher
7 Bearing
8 CrossScrew
9 MotorRotor
10 Bearing
11 CentrifugalSwitch
12 MotorStator
13 PowerSupplyCord
14 PowerSwitch
15 InsulatingBushing
16 Nut
17 HandleCover
18 JunctionBox
19 Capacitor
20 Handle
21 Nut
Part Description
22 MotorHull
23 Gasket
24 Bearing
25 CrossScrew
26 Centrf.SwitchBracket
27 ShaftSeal
28 OilFillCap
29 InletFittingCap
30 InletFitting
31 InletFittingCap
32 Filter
33 Seal
34 Trestle
35 O-Ring
36 O-Ring
37 PumpBody
37-1 Back-PumpCover
37-2 RotaryVane
37-3 PumpRotor
37-4 PumpStator
37-5 ExhaustValvePlate
Part Description
37-6 LimitingPlate
37-7 MiddleFence
37-8 PumpRotor
37-9 RotaryVane
37-10 Spring
37-11 PumpStator
37-12 FrontPumpCover
38 ExhaustFitting
39 OilHousing
40 SightGlass
41 OilDrainPlug
42 O-Ring
43 Screw
44 O-Ring
45 OilSeal
46 RubberFoot
47 Screw
48 Base
49 Screw
Parts List and Diagram
PLEASE READ THE FOLLOWING CAREFULLY
THEMANUFACTURERAND/ORDISTRIBUTORHASPROVIDEDTHEPARTSLISTAND
ASSEMBLYDIAGRAMINTHISMANUALASAREFERENCETOOLONLY.NEITHERTHE
MANUFACTURERORDISTRIBUTORMAKESANYREPRESENTATIONORWARRANTY
OFANYKINDTOTHEBUYERTHATHEORSHEISQUALIFIEDTOMAKEANYREPAIRS
TOTHEPRODUCT,ORTHATHEORSHEISQUALIFIEDTOREPLACEANYPARTSOF
THEPRODUCT.INFACT,THEMANUFACTURERAND/ORDISTRIBUTOREXPRESSLY
STATESTHATALLREPAIRSANDPARTSREPLACEMENTSSHOULDBEUNDERTAKEN
BYCERTIFIEDANDLICENSEDTECHNICIANS,ANDNOTBYTHEBUYER.THE
BUYERASSUMESALLRISKANDLIABILITYARISINGOUTOFHISORHERREPAIRS
TOTHEORIGINALPRODUCTORREPLACEMENTPARTSTHERETO,ORARISING
OUTOFHISORHERINSTALLATIONOFREPLACEMENTPARTSTHERETO.
Parts List
Record Product’s Serial Number Here:
Note:Ifproducthasnoserialnumber,recordmonthandyearofpurchaseinstead.
Note:Somepartsarelistedandshownforillustrationpurposesonly,
andarenotavailableindividuallyasreplacementparts.
Page11For technical questions, please call 1-800-444-3353.Item61176
SAFETYOPERATIONMAINTENANCE SETUP
Assembly Diagram
26
46
49
48
47
1
2
3
4
7
10
8
9
12
11
13
14
15
6
5
20
17
18
19
16
23
22
21
24
25
39
38
41
45
44 43 42
40
35
30
28
27
33
32
34
37
36
37-
37-
37-
37-
37-
37-
37-
37-
37-
37-
37-
1
2
3
4
5
6
7
8
9
10
11
29
31
37-
12
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Limited 90 Day Warranty
HarborFreightToolsCo.makeseveryefforttoassurethatitsproductsmeethighquality
anddurabilitystandards,andwarrantstotheoriginalpurchaserthatthisproductisfreefrom
defectsinmaterialsandworkmanshipfortheperiodof90daysfromthedateofpurchase.This
warrantydoesnotapplytodamageduedirectlyorindirectly,tomisuse,abuse,negligenceor
accidents,repairsoralterationsoutsideourfacilities,criminalactivity,improperinstallation,
normalwearandtear,ortolackofmaintenance.Weshallinnoeventbeliablefordeath,
injuriestopersonsorproperty,orforincidental,contingent,specialorconsequentialdamages
arisingfromtheuseofourproduct.Somestatesdonotallowtheexclusionorlimitationof
incidentalorconsequentialdamages,sotheabovelimitationofexclusionmaynotapplyto
you.THISWARRANTYISEXPRESSLYINLIEUOFALLOTHERWARRANTIES,EXPRESS
ORIMPLIED,INCLUDINGTHEWARRANTIESOFMERCHANTABILITYANDFITNESS.
Totakeadvantageofthiswarranty,theproductorpartmustbereturnedtouswith
transportationchargesprepaid.Proofofpurchasedateandanexplanationofthecomplaint
mustaccompanythemerchandise.Ifourinspectionverifiesthedefect,wewilleitherrepairor
replacetheproductatourelectionorwemayelecttorefundthepurchasepriceifwecannot
readilyandquicklyprovideyouwithareplacement.Wewillreturnrepairedproductsatour
expense,butifwedeterminethereisnodefect,orthatthedefectresultedfromcausesnot
withinthescopeofourwarranty,thenyoumustbearthecostofreturningtheproduct.
Thiswarrantygivesyouspecificlegalrightsandyoumayalso
haveotherrightswhichvaryfromstatetostate.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Pittsburgh Automotive Item 61176 Owner's manual

Category
Power tools
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI