Sytech SYX1230BTN Owner's manual

Category
Mobile headsets
Type
Owner's manual
WELCOME!
Dear Customer,
Welcome to Sytech! Thank you for purchasing the Bluetooth Stereo Headset SY-X1230BT.
Please read this manual carefully before operating your product and pay close attention to the precautions
which are mentioned below. Store this user manual in a safe place for future reference.
We are sure that this new Bluetooth Stereo Headset will satisfy your needs.
USE OF THE SY-X1230BT
1. With your mobile phone – pair and connect to enjoy your favorite music or answer phone calls.
2. With your PC (built in Bluetooth function or with USB dongle for Bluetooth) – You can listen to music from
the internet, from your hard drive, enjoy web chatting (SKYPE, MSN etc...)
3. With your IPAD\ MID, It is compatible to use when streaming music.
4. LINE IN – Connect any external audio device and use the headphones like any other normal headphone
set.
BUTTONS AND FUNCTIONS(Please refer to the drawing)
S1Next song / volume up
S2Play/Pause
S3Previous song / volume down
S4: Answer / Hang up / Reject call / Last number redial
S5ON/OFF / Pairing / Switch microphone (switch microphone between mobile phone and headset)
LEDDual colour led indicator
MICMicrophone
USB MINI USB charging socket
LINE IN: Audio Line in
CHARGING
This product comes with a built in rechargeable batter, when using the unit for the first time, please charge it
completely before using (Approx 4 hours).
-When the LED indicator turns red, it means that the charging is in process.
-When the LED indicator flashes in red, it means that the unit needs charging.
-When the LED indicator turns off, that means that the unit is completely charged.
PAIRING
Before using the Bluetooth headset with your desired device, you must pair the unit with the device first.
1. Press and hold the S5 button for about 6 seconds. When the LED indicator begins to flash quickly between
Blue and Red light and/or when the headset emits a double “beep” sound, means that the unit is now ready to
pair.
2. Search for the Bluetooth headset on your mobile phone. After the search is co
mpleted, “SY-X1230BT” should
appe
ar on your screen.
3. Select SY-X1230BT on the list, and it will begin to pair with your headset. When the headset is paired with your
mobile ph
one, the headset emits a “beep” sound and the LED light turns blue and begins to flash slowly.
Attention:
- Certain mobile phones require to insert a pairing code, If this is the case please input “0000” (4 zeros)
- If the headphone does not pair with a device within 3 minutes, the headset will automatically turn off.
- If you notice that the mobile phone or PC is not searching the headset, please re-enter into pairing mode by
following the instructions above.
POWER ON/OFF
1. Power On
reconnect to the device)
Press and hold the S5 button for a short time (1 second), the LED turns blue for one second and the
headphone emits a “beep” sound. The headset will automatically connect to the device which it has already
been paired with previously. When the reconnection is established the headset emits a “beep” sound once
again and the blue light begins to flash slowly.
Attention:
- Reconnection can only be established if the headset has been previously paired with the device.
- If the headphone is not reconnected to the device within 5 minutes, the headset will automatically turn off.
2. Power Off
Press and hold the S5 button for about 3 seconds, the LED turns blue for a few seconds continuously and the
headset emits a “beep” sound. The device is now turned off.
MAKING A PHONE CALL
When the Bluetooth headset and your mobile phone has been completed the pairing connection, you can use
the headset to answer a call or enjoy the stereo music over the cell phone.
DIALING, ANSWERING & ENDING A CALL
1. Dialing a call
1.1 Use your mobile phone to dial as usual; the call will automatically be switched to the Bluetooth headset.
(For some mobile phones, you may need to switch to the headset manually)
1.2 You may redial the last number by pressing the S4 button once.
2. Answering and ending a call
2.1 When there is an incoming call the phone will ring through the headset. Press the S4 button once to
answer the call.
2.2 When you are in an active call, press the S5 button to transfer the call to the phone; press it again to
transfer back the active call from the phone to the headset. (Some mobile phones may not support this
function)
2.3 To reject an incoming call, press and hold the S4 button for 1 second.
2.4 To decrease the volume of the headset press and hold the S3 button. To Increase the volume of the
headset press and hold the S1 button.
2.5 To end a call, press the S4 button once.
MUSIC PLAYBACK
Before playing music through your headset, make sure that the mobile phone you are using supports the
Bluetooth A2DP.
1To skip to the next song, press the S3 button once
2To skip to the previous song, press the S1 button once
3To resume or pause playback press the S2 button once.
4. Press and hold the S3 button to decrease the volume; Press and hold the S1button to increase the
volume.
5. If you receive a phone call in between music playback,
press S4 to answer the call. Long press S4 for 1 second
to end a call or wait till the other party hangs up the call. Once the phone call has been finalized the music will start
playing automatically again.
AUX CONNECTION (LINE-IN)
If no Bluetooth devices are available to pair the headset with, you may use a 3.5 jack cable to connect an
external audio device to the headset and use it as a wired one.
LOW BATTERY INDICATOR
When the battery of the headset is low, the red light will begin to flash every 10 seconds or the headset will
emit a double “beep” sound. If the power is too low, then the unit will turn off automatically, please recharge
the unit fully before the next use.
PACKAGE CONTENTS
1 x SY-X1230BT Bluetooth headset
1 x USB charging cable
1 x Instructions manual
1 x 3.5mm to 3.5mm line in cable
PRODUCT MAINTENANCE
- Using unoriginal accessories may cause performance degradation, personal injury, an electrical short circuit
and warranty failure.
- Disassembling the product can damage it and void your warranty.
- Do not place the headset in a dusty environment.
- Use a clean, soft, dry cloth to clean your headset.
- Store the product in a safe place.
- Keep children away from the headset.
- Avoid using the headset in extreme temperatures.
BATTERY MAINTENANCE
- For battery reparations, please contact Sytech Service Center.
- The rechargeable battery works at temperature between 10ºC – 45ºC.
- Battery capacity can be fully utilized at room temperature environment.
- In outdoor conditions, battery capacity may decrease.
- If you do not use the headset for a long time, please charge the battery at least once every two months.
SPECIFICATIONS
1.1 Assortment / Type Bluetooth headphone
1.2 Model no. SY-X1230BT
1.3 Operation frequency 2.402GHZ~2.480GHZ ISM Band
1.4 Power Class CLASS 2
1.5 Channel 79channels of 1Mhz BW
1.6 Connection P2P
1.7 Receiving range <= 10M
1.8 Frequency response 20HZ-20KHZ
1.9 SNR 80db
1.10 Indicator Red & blue dual color LED
1.11 Bluetooth version V2.1+EDR
1.12 Supported devices PC,USB Bluetooth dongle, cell phone, tablets and other
Bluetooth devices which support HFP, HSP,AD2P,
ACVRP.
1.13 Battery Polymer battery 3.7V 250mAH
1.14 Audio output power (max) 2 * 10 mW
1.15 Operating time
6hfully charged
1.16 Standby time
>=185hfully charged
DECLARATION OF CONFORMITY
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Sytech® SY-X1230BT Complies with the following standards:
CE Standards: Directive 1999/5/EC
EMC Standrards: Directive 2004/108 CE
ROHS standard:2011/65/EC Restriction of Hazardous Substance
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Sytech SYX1230BTN Owner's manual

Category
Mobile headsets
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI