Generation Lighting 5251005-846 Installation guide

Brand
Generation Lighting
Model
5251005-846
Category
Pet care
Type
Installation guide

This manual is also suitable for

Page is loading ...
1A
Install the Fixture
2
Screw the shorter end of the threaded nipple tightly onto the mounting plate.
Secure the mounting plate to the junction box.
Temporarily unscrew and remove the collar nut and screw the screw collar tightly onto the threaded nipple.
Feed the wires through the lower threaded nipple and screw it onto the fixture.
Feed the fixture wires through the upper cup and fixture loop (in that order), then slide them down and secure them in
place by screwing the fixture loop onto the lower threaded nipple.
Screw the threaded pipe to the bottom of the fixture.
Place the lower cup on the threaded pipe and secure it in place using the finial.
Install the candle tubes by sliding them over the sockets.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
Secure the ring to the fixture arm using the screws.
Determine the wanted height of the fixture and remove a portion of the chain by opening a link and removing it from the
bottom.
Install the canopy and the collar nut onto the chain (in that order) then install the open link onto the fixture loop and
secure it in place by closing the link.
Weave the cord through the chain, screw collar, canopy, threaded nipple, and out of the junction box. Trim the cord
leaving enough to make electrical connections.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place by screwing the
collar nut tightly onto the screw collar.
1
2
3
4
5
6
7
8
9
10
11
12
13
LAMP
SOCKET
JUNCTION BOX
MOUNTING PLATE
CANOPY
THREADED NIPPLE
SCREW COLLAR
COLLAR NUT
FIXTURE LOOP
2
5
10
L THREADED NIPPLEOWER
THREADED PIPE
CHAIN
LOWER CUP
FINIAL
CANDLE TUBE
UPPER CUP
RING
SCREW
FIXTURE ARM
14
15
16
17
1
6
7
8
9
15
16
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Generation Lighting 5251005-846 Installation guide

Brand
Generation Lighting
Model
5251005-846
Category
Pet care
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents