Panasonic BDT170 Owner's manual

Brand: Panasonic

Model: BDT170

Category: Blu-Ray players

Type: Owner's manual

Operating Instructions

Blu-ray Disc

Player

Model No. DMP-BDT270

DMP-BDT170

DMP-BDT166

DMP-BDT165

DMP-BD83

DMP-BD73

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Model number suffix “EB” denotes UK model.

Unless otherwise indicated, illustrations in these operating instructions are of DMP-BDT270.

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure

that our customers are enjoying the latest technology.

Panasonic recommends updating your firmware as soon as you

are notified.

For details, refer to “Firmware updates” (> 15) or

http://panasonic.jp/support/global/cs/ (This site is in English only.)

SQW0349-2

until

2014/4/14



GA GC GJ

- 2 -

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥ Do not place objects filled with liquids, such as vases, on this

unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the

socket outlet immediately.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles,

on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile telephone.

[For_the_United_Kingdom,_Ireland,_A ust rali a _and _New_Zealand]

≥ This unit is intended for use in moderate climates.

[For_th e_Middle_Ea st_ a nd_South_East _Asia]

≥ This unit is intended for use in tropical climates.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or

in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers,

tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that

may become hot. The heat can damage the unit.

≥ Do not expose this unit to direct sunlight, high temperatures,

high humidity, and excessive vibration.

Batteries

Mishandling of batteries can cause electrolyte leakage and may

cause a fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace

only with the type recommended by the manufacturer.

≥ When disposing of the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same

time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for

a long period of time. Store in a cool, dark place.

[BDT166/165] [BD83] [BD73]

AC adaptor

The AC adaptor operates on AC between 110 V and 240 V.

But obtain a suitable plug adaptor if the plug does not fit the AC

mains socket.

Precautions

WARNING

CAUTION

Caution for AC Mains Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for

your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the

replacement fuse has a rating of 5-ampere and that it is approved

by ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the body of the

fuse.

If the plug contains a removable fuse cover you must ensure that it

is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your local

dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains

plug (figures A and B). Confirm the AC mains plug fitted and follow

the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Fuse cover

Figure A Figure B

Fuse

(5 ampere)

Fuse

(5 ampere)

- 3 -

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of

unauthorized copies of some commercially-produced film and

videos and their soundtracks. When a prohibited use of an

unauthorized copy is detected, a message will be displayed and

playback or copying will be interrupted.

More information about Cinavia technology is provided at the

Cinavia Online Consumer Information Center at

http://www.cinavia.com. To request additional information about

Cinavia by mail, send a postcard with your mailing address to:

Cinavia Consumer Information Center, P.O. Box 86851, San

Diego, CA, 92138, USA.

≥ The operation history may be recorded in the memory of this

unit.

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products, packaging, and/or

accompanying documents mean that used electrical

and electronic products and batteries must not be

mixed with general household waste.

For proper treatment, recovery and recycling of old

products and used batteries, please take them to

applicable collection points in accordance with your

national legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential negative

effects on human health and the environment.

For more information about collection and recycling,

please contact your local municipality.

Penalties may be applicable for incorrect disposal of

this waste, in accordance with national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination with a

chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical

involved.

Restriction on use of

unauthorized copied content

[BDT270]

Wireless LAN connection

The following limits are in place regarding the usage of this unit.

You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage

which may arise due to a failure to obey these limits, or to any

condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be

intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and

follow the following points:

– Do not expose this unit to high temperatures or direct

sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

[For_t he_Uni t e d_Ki ngdom_and_Ireland]

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our

R&TTE products from our DoC server:

http://www.doc.panasonic.de

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

This product is intended for general consumer. (Category 3)

This product on purpose to connect to access point of 2.4 GHz

WLAN.

[For_UAE]

[For_QATAR]

To dispose or transfer this

unit

The unit may keep the user settings information in the unit. If you

discard this unit either by disposal or transfer, then follow the

procedure to return all the settings to the factory presets to delete

the user settings. (> 30, “To return all settings to the factory

preset.”)

UAE-TRA

DA0052708/10

DEALER No:

ER36990/15

REGISTERED No:

ict

QATAR

Type Approval reg. No.:

CRA/SA/2015/R-4570

Importer No:

4299

- 4 -

Table of contents

Precautions . . . . . . . . . . . . . . . . . 2

Getting started

Accessories . . . . . . . . . . . . . . . . . 5

Unit and media care . . . . . . . . . . . 6

Playable media. . . . . . . . . . . . . . . 7

Control reference guide . . . . . . . . 9

Connections and settings

Connecting to a TV . . . . . . . . . . 11

Connecting to an amplifier/

receiver. . . . . . . . . . . . . . . . . . . 12

Connecting to the network . . . . . 13

Settings . . . . . . . . . . . . . . . . . . . 14

Playback

Inserting or removing media . . . . 15

HOME menu . . . . . . . . . . . . . . . . 16

Playback . . . . . . . . . . . . . . . . . . . 17

Enjoying Network Service . . . . . . 19

Home Network feature . . . . . . . . 20

“HDMI CEC” . . . . . . . . . . . . . . . . 22

USB Sharing . . . . . . . . . . . . . . . . 22

Settings

Option menu . . . . . . . . . . . . . . . . 23

Setup menu. . . . . . . . . . . . . . . . . 24

Reference

Troubleshooting guide . . . . . . . . 30

Specifications . . . . . . . . . . . . . . . 34

Limited Warranty (ONLY FOR

AUSTRALIA). . . . . . . . . . . . . . . 38

Getting started

- 5 -

Getting started

Accessories

Check the supplied accessories before using this

unit.

1 Remote control

[BDT270]

[For_the_ Unit ed_Kingdom_an d_Ireland]

(N2QAYB001031)

[For_the_ Mi ddle_ East ]

(N2QAYB000959)

[BDT170]

[For_the_ Unit ed_Kingdom_an d_Ireland]

[For_Austr alia_ and_New_Zealand]

(N2QAYB001030)

[For_the_ Sou th _East_Asia]

(N2QAYB001033)

[BDT166/165] [BD83]

[For_the_ Unit ed_Kingdom_an d_Ireland]

[For_Austr alia_ and_New_Zealand]

(N2QAYB001029)

[For_the_ Mi ddle_ East _and_South_East_Asia]

(N2QAYB000958)

[BD73]

[For_the_ Mi ddle_ East ]

(N2QAYB000987)

2 Batteries for remote control

AC mains lead

[BDT270] [BDT170]

[For_the_ Unit ed_Kingdom_an d_Ireland]

(K2CT2CA00007)

[For_Austr alia_ and_New_Zealand]

(K2CJ2DA00014)

[BDT270] [BDT170] [BDT165] [BD73]

[For_the_ Mi ddle_ East _and_South_East_Asia]

[BDT166/165] [BD83] [BD73]

1 AC adaptor

[For_the_ Unit ed_Kingdom_an d_Ireland]

(SAE0003)

[For_Austr alia_ and_New_Zealand]

(SAE0004)

[For_the_ Sou th _East_Asia]

(SAE0002)

[For_the _Middle_E as t _a nd_Thailand]

[Except_th e_Uni ted _Kingdom_and_I reland]

[Except_BD73]

1 HDMI Cable



≥ Product numbers are provided in these operating

instructions correct as of January 2015. These may be

subject to change.

≥ Do not use AC mains lead and AC adaptor

with other

equipment.

≥ Do not use any other AC mains lead and AC adaptors

except the supplied one.

* See page 11 for more information.

∫ Using the remote control

Insert the batteries to the terminal so that it (i

and j) matches those in the remote control.

Point it at the remote control signal sensor on this

unit. (> 9)



R6/LR6, AA



(Alkaline or manganese batteries)

Getting started

- 6 -

Unit and media care

∫ Clean this unit with a soft, dry

cloth

≥ Never use alcohol, paint thinner or benzine to

clean this unit.

≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens

Use the lens cleaner (not supplied) to clean the

unit’s lens.

∫ Clean discs

Wipe with a damp cloth and then wipe dry with a

dry cloth.

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine,

thinner, static electricity prevention liquids or

any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed

stickers or labels (rented discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart

shapes.

∫ Disc handling precautions

DO NOT

Getting started

- 7 -

Playable media

* [BDT270] [BDT170] [BDT166/165]

≥ See pages 8 and 34 for more information on the types of content that can be played.

Device Media markings Device types Contents format

BD-Video Video

BD-RE

Video,

JPEG, MPO*,

AAC, ALAC, DSD*,

FLAC, MP3, WAV,

WMA

BD-R

Video, MKV, Xvid,

AAC, ALAC, DSD*,

FLAC, MP3, WAV,

WMA

DVD-Video Video

DVD-R

Video, AVCHD, MKV,

Xvid,

JPEG, MPO*,

AAC, ALAC, DSD*,

FLAC, MP3, WAV,

WMA

DVD-R DL

DVD-RW

Video, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA]

—

CD-R

CD-RW

MKV, Xvid,

JPEG, MPO*,

AAC, ALAC, FLAC,

MP3, Music [CD-DA],

WAV, WMA

—

USB devices

(up to 4 TB)

MKV, MP4, MPEG2,

Xvid,

JPEG, MPO*,

AAC, ALAC, DSD*,

FLAC, MP3, WAV,

WMA

DVD

USB

Getting started

- 8 -

∫ Types of discs that cannot be

played by this unit

Any other disc that is not specifically

supported or previously described.

∫ Region management information

The unit can play back BD-Video/DVD-Video

discs of the following regions codes, including

“ALL”:

Example: BD-Video DVD-Video

[For_the _Uni ted _Kingdom_and_Ireland] [For_ t he_Middle_East ]

[For_Aust rali a _and _New_Zealand]

[For_the_So ut h_E ast _Asia]

∫ Finalize

Any DVD-R/RW/R DL, +R/+RW/+R DL and

CD-R/RW that are recorded by a recorder need to

be finalized by the recorder to play on this unit.

Please refer to the recorder’s instructions.

∫ BD-Video

≥ This unit supports high bit rate audio (Dolby

Digital Plus, Dolby

TrueHD, DTS-HD High

Resolution Audio

and DTS-HD Master

Audio

) adopted in BD-Video.

[BDT270] [BDT170] [BDT166/165]

∫ Music CD

Operation and sound quality of CDs that do not

comply with CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed to work.

∫ USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device

charging.

≥ FAT12, FAT16, FAT32, and NTFS file systems

are supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit supports an HDD formatted in FAT32

and NTFS. If the HDD is not recognized, the

power to the HDD may not be supplied. Supply

power from an external source.

∫ BD-RE, BD-R

Discs recorded in DR mode using Panasonic

Blu-ray Disc recorders may not play back the

audio etc., correctly.



≥ It may not be possible to play the above media in some

cases due to the type of media, the condition of the

recording, the recording method, and how the files were

created.

≥ The producers of the disc can control how discs are

played, so you may not always be able to control play as

described in these operating instructions. Read the disc’s

instructions carefully.

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ HD DVD

≥ If “Dolby D/Dolby D +/Dolby TrueHD” is set to

“PCM” and “DTS Neo:6” is set to “Off”, the

maximum possible number of Dolby

sound is

2ch PCM. (> 25, 26)

∫ 3D

≥ 3D videos and 3D still pictures can be played

back when this unit is connected to a 3D

compatible TV using a High Speed HDMI

Cable.

≥

[BDT270] [BDT170] 2D video can be enjoyed as 3D

virtually. (> 24)

Getting started

- 9 -

Control reference guide

When other Panasonic devices respond to the remote control of the unit, change the remote control

code. (> 29)

e.g., [Fo r _the_United_Kingdom_and_Ireland]

[For_Aust rali a _and _New_Zealand]

e.g., [For_the_Midd le_E ast _and_South_E ast _Asia]

abc

jkl

mno

pqrs tuv

wxyz

ㄅㄆㄇ

ㄈㄉㄊ

[BDT170]

[BDT166/165]

[BD83]

abc

jkl

mno

pqrs tuv

wxyz

ㄅㄆㄇ

ㄈㄉㄊ

[BD73]

[BDT170]

[BDT165]

[BD83] [BD73]

282725 26

2825

[BDT270]

[BDT170]

[BDT166/165]

[BD83] [BD73]

Getting started

- 10 -

1 Turn the unit on and off

2 TV operation buttons

You can operate the Panasonic TV using this

unit’s remote control. Some buttons may not

work depending on the TV.

[Í TV] : Turn the TV on and off

[AV] : Change input

[ijVOL] : Adjust the volume

3 Select title numbers, etc./Enter numbers or

[BDT270] [BDT170] characters

4 Cancel

5 Change soundtrack (> 17)

6 Basic playback control buttons (> 17)

[For_the_ Unit ed_Kingdom_an d_Ireland]

[For_Austr alia_and_New_Zealand]

Show Pop-up menu (> 17)

[For_the_ Mi ddle_East_and_South_East _Asi a]

Show USB Sharing menu (> 22)

8 Show Top menu (> 17)

9 Show Option menu (> 23)

10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the

display

11 Transmit the remote control signal

12 Open or close the disc tray (> 15)

13 Show the status messages (> 18)

[BDT270]

Show Miracast

screen (> 20)

[BDT170] [BDT166/165] [BD83] [BD73]

Switch Secondary Video on/off

(Picture-in-picture) (> 23)

[Except_BD73]

Show the Home Screen of the Network

Service (> 19)

[BD73]

Show Setup menu

16 Exit the Menu screen

[For_the _United_ Kingdom_and_Irela nd]

[For_Australia_and_New _Ze a la nd]

Show Netflix screen (> 19)

[For_the_ Mi ddle_East_and_South_East _Asi a]

Show Pop-up menu (> 17)

18 Show HOME menu (> 16)

19 [3, 4, 2, 1] : Move the highlight for

selection

[OK] : Confirm the selection

(;1) : Frame-by-frame (> 17)

20 Return to previous screen

21 Disc tray (> 15)

22 USB port (> 15)

23 POWER LED

The LED lights when the unit is turned on,

and flashes when error occurs.

24 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20e up and down, 30e left and

right

25 Open or close the disc tray (> 15)

[BDT270] [BDT170]

Stop (> 17)

[BDT270] [BDT170]

Start play (> 17)

28 Standby/on switch (Í/I) (> 14)

Press to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

Rear panel terminals (> 11–13)

∫ Available keys for HDMI CEC (> 22)

3 Number keys

6 Basic playback control buttons

9 Option button

10 Coloured buttons (red, green, yellow, blue)

16 Exit button

19 [3, 4, 2, 1]/[OK] button

20 Return button

- 11 -

Connections and settings

Connecting to a TV

Connect the AC mains lead after making all connections.

≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC

power.

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or

[BDT270] [BDT170]

24p (4K) signal, please use HDMI cables 5.0 meters or less.

[Except_the_United_Kingdom_and_Ireland ] [Except_ BD73] The HDMI-compliant cable is supplied with this unit.

≥ This unit consumes a small amount of AC power (> 34) even when turned off in standby mode. For

the purpose of energy conservation, the unit should be disconnected if you will not be using it for

extended period of time.

≥

[BDT166/165] [BD83] [BD73] The unit is in the standby condition when the AC adaptor is connected. The

primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

HDMI IN

[BDT270]

[BDT170]

[BDT166/165]

[BD83] [BD73]

AC mains lead (supplied)

AC mains lead

(supplied)

HDMI cable

([Excep t_ t he _United_Kingdom_and_Irelan d]

[Except_BD73] supplied)

[BDT166/165]

[BD83] [BD73]

[BDT270]

[BDT170]

AC adaptor (supplied)

To a household mains socket

[For_the _Thaila nd] [BD83]

AC adaptor

(supplied)

[For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand]

[For_the_South_East_Asia]

[For_the _Middle_E a st] [BDT165] [BD83] [BD73]

AC mains lead

(supplied)

AC adaptor

(supplied)

[BDT270] [BDT165] [BD73] [For_the_Middle_East]

[BDT170]

[For_the_South_East_Asia]

2 AC mains leads are supplied.

Use the AC mains lead that matches the socket for the area you live in.

≥ Saudi Arabia: 3-pin AC mains lead

≥ Thailand: With a label

- 12 -

Connections and settings

Connecting to an amplifier/receiver

≥ Set “Digital Audio Output” (> 25).

≥

[BDT270] [BDT170] [BDT166/165] When connecting to a non-3D or [BDT270] [BDT170] 4K compatible amplifier/

receiver, connect this unit to a TV, then connect the TV and the amplifier/receiver. Please note,

however, that the audio can only be up to 5.1ch.

≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”

(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected

using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.

HDMI IN

(ARC)

HDMI OUT

(ARC)

HDMI IN

HDMI cable

Amplifier/receiver

[BDT270]

[BDT170]

[BDT166/165]

[BD83] [BD73]

HDMI cable

([Except_the_United_Kingdom_and_Ireland]

[Except_BD73] supplied)

[BDT270]

[BDT170]

[BDT166/165]

[BD83] [BD73]

- 13 -

Connections and settings

Connecting to the network

[Except_BD73]

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated (> 15)

≥ You can enjoy BD-Live (> 18)

≥ You can enjoy Network Service (> 19)

≥

[BDT270] [BDT170] You can access other devices (Home Network) (> 20)

For details about connection method, refer to the instructions supplied with the connected equipment.

≥ For up-to-date compatibility information on your wireless router, refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.

≥

[BDT270] This unit supports Wi-Fi Direct

and can make a wireless connection to wireless devices

without router. You can use this function when enjoying Home Network feature, etc. Internet access

is not available while connected via Wi-Fi Direct

. (> 20, 27)

[BDT270]

Wireless LAN connection

This unit has built-in Wi-Fi

and can be connected to a wireless router.

Wireless router, etc.

Internet

≥ The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports,

stations, cafes, etc.

≥ See page 3 for the precautions for wireless LAN connection.

LAN cable connection

Internet

LAN Cable

Broadband router, etc.

[BDT166/165]

[BD83]

[BDT270]

[BDT170]

- 14 -

Connections and settings

Settings

The following settings can be performed anytime

in the Setup menu. (> 27, 28)

After connecting your new player for the first time

and pressing [Í], the basic settings screen will

appear.

Preparation

Turn on the TV and select the appropriate

video input.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions to

continue with the settings.

After completing “Easy Settings”, you can perform

“Easy Network Setting”.

Follow the on-screen instructions to establish

your connection settings.

e.g., [BDT270]

Select “Wired” or “Wireless” and press [OK].

[BDT270]

∫ About the wireless connection

Before beginning wireless connection setup

≥ Obtain your network name (SSID*).

≥ If your wireless connection is encrypted, please

be sure that you know your encryption key.

If your SSID is not displayed;

≥ Search again by pressing the red button on the

remote control.

≥ Stealth SSIDs will not be displayed; in this case,

enter manually by using “Manual setting”.

Press [HOME]

> press [OK] to select “Setup”

> select “Player Settings”

> select “Network” and press [OK]

> select “Network Settings” and press [OK]

> select “Wireless Settings” and press [OK]

> select “Connection Setting” and press [OK]

> select “Manual setting” and press [OK]

If your wireless network is encrypted;

Encryption Key input screen will be displayed.

Input the encryption key of your network.

≥ An USB keyboard can be used, but only for the

keys displayed on the screen.

If your wireless router is supports WPS (Wi-Fi

Protected Setup

);

You can easily set up a connection by pressing

the green button on the remote control.



≥ Refer to the operating instructions of the hub or router.

≥ [BDT270]

Do not use this unit to connect to any wireless

network for which you do not have usage rights.

Using these networks may be regarded as illegal

access.

≥ If you have trouble getting online on your PC after

performing network settings on this unit, perform the

network settings on your PC.

≥ [BDT270]

Please be aware that connecting to a network

without encryption may result in the leaking of data such as

personal or secret information.

* SSID:

An SSID (Service Set IDentification) is a name used by

wireless LAN to identify a particular network. Transmission

is possible if the SSID matches for both devices.

Easy Settings

[Except_BD73]

Easy Network Setting

Wired

Wireless

Select a connection mode.

RETURN

- 15 -

Playback

Occasionally, Panasonic may release updated

firmware for this unit that may add or improve the

way a feature operates. These updates are

available free of charge.

[Except_BD73]

This unit is capable of checking the firmware

automatically when connected to the Internet via

a broadband connection.*

When a new firmware version is available, the

following message is displayed.

You can also download the latest firmware from

the following website and store it to a USB device

to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

DO NOT DISCONNECT the unit from the AC

power or perform any operation while the update

takes place.



≥ To show the firmware version on this unit. (> 29,

“Firmware Version Information”)

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.

≥ [Except_BD73]

If you do not want to check for the latest

firmware version, set “Automatic Update Check” to “Off”.

(> 29)

* You must agree to the terms of use for the Internet function

and the privacy policy. ([BDT270] [BDT170] > 16, “Notice”,

[BDT166/165] [BD83] > 28, “Notice”)

Playback

Inserting or removing

media

Notes

≥ When inserting a media item, ensure that it is

facing the correct way, which is the right side

facing up.

≥ If you connect a Panasonic product with a USB

connection cable, the setup screen may be

displayed on the connected equipment. For

details, refer to the instructions for the

connected equipment.

CAUTION

Do not place objects in front of the unit. The disc

tray may collide with objects when it is opened,

and this may cause malfunction.

Firmware updates

After the firmware is installed, unit will restart and

the following screen will be displayed.

e.g.,

Firmware Update

Current Version: X.XX

New Version: X.XX

Do you want to start firmware update?

For the update information, please visit the

following website:

http://panasonic.jp/support/global/cs/

Yes No

RETURN

The firmware has been updated.

Current Version

x.xx

RETURN

- 16 -

Playback

HOME menu

Major functions of this unit can be operated from

the HOME menu.

Preparation

Turn on the TV and select the appropriate video

input.

1 Press [Í] to turn on the unit.

2 Press [OK] or [3, 4, 2, 1] to select the

item.

≥ If there are any other items, repeat this

step.

[BDT270] [BDT170]

[BDT166/165] [BD83]

Network Service

Displays the Home Screen of Network Service.

(> 19)

[BDT270] [BDT170]

Notice

Displays the terms of service for the cloud

services.

To show the HOME menu

Press [HOME].



≥ Items to be displayed may vary with the media.

≥ After network service introduction banner is

shown, the HOME menu is displayed.

– When connected to the network, the

banner content may be changed.

– You can disable the “Start-up Banner”

(> 29).

Videos

MusicPhotos Setup

Network

HOME

Blu-ray Disc Player

Setup

Notice

Videos/Photos/Music

Disc

Play back the contents.

(> 17)

≥ When multiple contents

are recorded, select the

types of contents or the

title.

USB

[BDT270] [BDT170]

Network

Network Service

Displays the Home

Screen of Network

Service. (> 19)

Home Network

DLNA Client (> 20)

[BDT270] Miracast (> 20)

Media Renderer (> 21)

Setup

Player Settings

(> 24)

[Except_BD73]

USB Management

(> 18)

[For_the_S out h_East_Asia]

[For_t he_M iddle_East]

USB Sharing

(> 22)

Wallpaper

Changes the background

of HOME menu.

- 17 -

Playback

1 Insert the media.

Playback starts depending on the media.

2 Select the item to play and press [OK].

Repeat this step if necessary.



≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [∫STOP] when you have finished

playback to protect the unit’s motor, your TV screen and so

on.

≥ It is not possible to play back AVCHD and MPEG2 videos

which have been dragged and dropped or copied and

pasted to the media.

The following functions may not work depending

on the media and contents.

Press [∫STOP].

The stopping point is memorized.

Resume play function

Press [1PLAY] to restart from this point.

≥ The point is cleared if the media is removed.

≥ On BD-Video discs including BD-J, the

resume play function does not work.

Press [;PAUSE].

≥ Press [;PAUSE] again or [1PLAY] to restart

play.

While playing, press [SEARCH6] or

[SEARCH5].

Slow motion

While paused, press [SEARCH5].

≥ Xvid, MKV, MP4 and MPEG2: Not effective.

The speed increases up to 5 steps.

≥ Music, MP3, etc.: The speed is fixed to a single

step.

≥ Press [1PLAY] to revert to normal playback

speed.

While playing or paused, press [:] or

[9].

Skip to the title, chapter or track.

While paused, press [1] (;1).

≥ Press and hold to fast forward.

≥ Press [1PLAY] to revert to normal playback

speed.

≥ Xvid, MKV, MP4 and MPEG2: Not effective.

Press [AUDIO].

You can change the audio channel number or

soundtrack language, etc.

Select the item and press [OK].

Operations during playback

Stop

Pause

Search/Slow motion

Skip

Frame-by-frame

Changing soundtrack

Show top menu/pop-up menu

Press [TOP MENU] or [POP-UP MENU].

- 18 -

Playback

While playing, press [STATUS].

The status messages give you information about

what is currently being played. Each time you

press [STATUS], the display information may

change or disappear from the screen.

≥ Depending on media and contents, the display

may change or not appear.

e.g., BD-Video

A T: Title, C: Chapter, PL: Playlist

B Elapsed time in the title

C Current position

D Tota l ti me

e.g., JPEG

With “BD-Live” discs, you can enjoy bonus

contents that use Internet access.

For this BD-Live function, connection of a USB

device is necessary along with Internet

connection.

1 Perform network connection and settings.

(> 13, 14)

2 Connect a USB device with 1 GB or more

free space.

≥ The USB device is used as the local

storage.

3 Insert the disc.

∫ Deleting data on the USB device

Select “USB Management” in the HOME menu

(> 16), then select “BD-Video Data Erase” and

press [OK].



≥ The usable functions and the operating method may vary

with each disc, please refer to the instructions on the disc

and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for

certain discs (> 28).

Play a slideshow of photos and adjust various

settings during the playback.

1 Insert the media.

2 Select “Photos”.

3 Select an item and press the green button.

The following items can be set.



≥ Still pictures displayed as “ ” cannot be played back

with this unit.

Show the status messages

[BDT270] [BDT170] [BDT166/165]

Enjoying 3D video and photos

Preparation

Connect this unit to a 3D compatible TV. (> 11)

≥ Perform the necessary preparations for the TV.

≥ Play back following the instructions displayed

on the screen.

≥ 3D Settings (> 24, 26)



≥ Please refrain from viewing 3D images if you do not feel

well or are experiencing visual fatigue.

In the event that you experience dizziness, nausea, or

other discomfort while viewing 3D images, discontinue use

and rest your eyes.

≥ 3D video might not output the way it is set in “HDMI Video

Format” and [BDT270] [BDT170] “24p(4K)/24p Output”/

[BDT166/165] “24p Output” (> 25).

≥ When playing back 3D photos from “Photos” screen, select

from the “3D” list. (Still pictures in “2D” are played back in

2D.)

If “2D” and “3D” indications are not displayed, press the

red button on the remote control to switch the view of

playback contents.

Play

BD-Video

T1 C1 0:05.14

0:20.52

C D

Date

Size

Manufacturer

Equipment

1 / 26

11.12.2007

500 X 375

[Except_BD73]

Enjoying BD-Live

Slideshow

Start

Slideshow

Start the slideshow.

You can display still pictures in

the selected folder one by one

at a constant interval.

Interval Change the display interval.

Transition

Effect

Select the effect when sliding

pictures.

Repeat Play

Set whether to repeat the

slideshow.

- 19 -

Playback

Enjoying Network

Service

[Except_BD73]

Network Service allows you to access some

specific websites supported by Panasonic.

[BDT166/165] [BD83] This unit has no full browser

function and some features of websites may not

be available.

* Images are for illustration purposes, contents may change

without notice.

Preparation

≥ Network connection (> 13)

≥ Network settings (> 14)

1 Press [INTERNET].

[For_the_ Unit ed_Kingdom_an d_Ireland]

[For_Austr alia_and_New_Zealand]

≥ Netflix can be accessed directly by

pressing [NETFLIX] button even when this

unit is off.

2 Select the item and press [OK].

To exit from Network Service

Press [HOME].

BACK

XXXXXX

XXXXXXXXXXXXXXX

XXXXXXXXXXX

XXXXXXXX

XXXX

XXXXXX, XXXX

XXXXXXXX

39°C

Market

XXXXXXXXXXXXXXXXXXXX

XXXXX

XXXXXX

XXXX

Network Service provides a variety of

selected Internet services such as the

following.

≥ Online movie rental service

≥ Video browsing service

Internet

[BDT270]



≥ When playing content in the media, Network Service

cannot be accessed by pressing [INTERNET].

≥ An USB keyboard can be used, but only for the keys

displayed on the screen. It may not be used depending on

the service.

≥ In the following cases, settings are possible using the

Setup menu items.

– When restricting the use of Network Service

(> 28, “Network Service Lock”)

– When correcting the displayed time

(> 27, “Time Zone”, “Summer Time”)

– When using another device such as a smartphone in

combination with the unit by using a certain app on the

device

(> 27, “Remote Device Operation”)

≥ When using a slow Internet connection, the video may not

be displayed correctly. A high speed Internet service with a

speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware as soon as a firmware

update notice is displayed on the screen. If the firmware is

not updated, you may not be able to use Network Service

function properly. (> 15)

≥ Network Service Home Screen is subject to change

without notice.

≥ The services through Network Service are operated by

their respective service providers, and service may be

discontinued either temporarily or permanently without

notice. Therefore, Panasonic will make no warranty for the

content or the continuity of the services.

≥ Some features of websites or content of the service may

not be available.

≥ Some content may be inappropriate for viewers.

≥ Some content may only be available for specific countries

and may be presented in specific languages.

- 20 -

Playback

You can share photos, videos and music stored in

the DLNA Certified media server [PC with

Windows 7 installed, smartphone, recorders, etc.]

connected to your home network.

≥ About support format of DLNA (> 35).

Preparation

1 Perform network connection (> 13) and

network settings (> 14) of this unit.

2 Add the contents and folder to the libraries of

the Windows Media

Player or the

smartphone, etc.

≥ Playlist of Windows Media

Player can play

back only the contents that are stored in the

libraries.

≥ When connected to Panasonic DLNA

compatible recorders, register this unit to your

Panasonic DLNA compatible recorders.

≥ The list can be updated by pressing the red

button on the remote control.

5 Select the equipment and press [OK].

6 Select the item to play and press [OK].

≥ You may be able to use convenient

functions depending on the content by

pressing [OPTION].

To exit from Home Network

Press [HOME].

Home Network feature

Before using the following features, be sure to

configure the connected equipment on your

Home Network.

[BDT270]

Using Miracast

You can enjoy the content you are viewing on a

Miracast-compatible smartphone, etc. on the big

screen of your TV.

≥ Compatible with Android

devices, ver. 4.2

and above and Miracast certified.

For information on whether the smartphone,

etc. supports Miracast, contact the

manufacturer of the device.

1 Press [MIRACAST].

2 Operate the Miracast compatible device.

≥ On the device, enable Miracast and select

this unit as the device to be connected.

For details, refer to the instructions

supplied with the device.

To exit from Miracast

Press [HOME].

Player

Miracast compatible

device

[BDT270] [BDT170]

Playing back contents on the

DLNA server

1 Press [HOME].

2 Select “Network”.

3 Select “Home Network”.

4 Select “DLNA Client”.

≥

[BDT270] The connection method can be

switched to Wi-Fi Direct by pressing the

green button on the remote control.

Player

Server

Page is loading ...

Panasonic BDT170 Owner's manual

Brand: Panasonic

Model: BDT170

Category: Blu-Ray players

Type: Owner's manual

Download PDF

report

Panasonic BDT170 Owner's manual

Panasonic BDT170 Owner's manual

Related papers

Other documents