210 mm (8.26")
Speaker Right
Main Unit
Holes
Speaker Left
Wall mounting instructions
Drill holes on wall at hole positions marked.
Use screws to mount the main unit on the wall
• Use this sheet as a template. Mark the position where you
want to hang the unit on the wall (as shown) and then drill
two 6mm diameter holes.
• Secure the 2 supplied dowels and screws in the holes
respectively, leaving the screws 5mm proud of the wall.
• Hang the unit on the fastening screws.
Wall Mounting.indd 1Wall Mounting.indd 1 2008-01-18 11:46:58 AM2008-01-18 11:46:58 AM
210 mm (8.26")
Speaker Right
Main Unit
Holes
Speaker Left
牆上安裝說明
在牆面畫兩個孔，再在兩孔位置上鑽個洞眼。
用鏍絲釘將本機安裝到牆上
•
按上圖所示，在牆面選定合適的地方，以本張安裝說明紙
所示的兩孔上（兩孔距離為 210mm）鑽兩個直徑為 6mm
的孔，此兩個孔就是本機要掛到牆上的地方。
•
將隨機附送的兩個鏍絲釘套鑽入牆內，再將附送的兩個鏍
絲釘鑽入釘套內，鏍絲釘離牆面要有 5mm 的距離。
•
將本機掛到鏍絲釘上面去。
Wall Mounting.indd 2Wall Mounting.indd 2 2008-01-18 11:47:13 AM2008-01-18 11:47:13 AM
/
