INTRODUCTION
Service Manual – YBZE DCI 1-A.1 GB 1-1
1. INTRODUCTION
1.1 General
The YBZE DC inverter multisplits outdoor is a multi-tubing system with 2, 3 or 4
connected indoor units. The multi-split inverter is a high level technology product for
residential and commercial application offering comfort, low noise operation and
energy saves.
Indoor HZDE series is high-wall mounted type indoor which are mainly designed
for residential buildings.
The indoor has 3 models 09/12/18 in cooling capacity.
1.2 Main Features
The unit benefits from the most advanced technological innovations, namely:
DC inverter technology.
R410A models
Microprocessor control and indoor LED display
High COP, Energy efficiency class A in cooling/heating mode
Max allowing total tubing distance of 70m(for model 24,30)
Up to 10 m vertical high between indoor and outdoor units
Easy installation and service.
Sleep mode from remote control to save energy
ON/OFF timer and clock display
Vertical auto swing with motorized flap (any position stop)
Intelligent Deicing
Memory from power failure
Rapid cooling/heating
I-Feel function
Cold air prevention in heating
Clean function (Blow dry)
Self diagnostic (Error indications) for ease of maintenance