Visual Land V-TOUCH PRO User manual

V - TOUCH Page | 1

V-Touch Instruction Manual

Thank you for your purchase of the Visual Land V-Touch. Before beginning please look over all the

information in this instruction manual, which will instruct you on the proper usage instructions.

CHARGING YOUR V-TOUCH

There are two ways to charge your player, either by USB directly connected to your

computer. Or you can also charge it by USB connecting the V-Touch to the supplied wall

charger. The faster way would be through wall charger, both methods can successfully

charge the unit. NOTE: while player is connected to your computer it will charge even if

downloading files.

TURNING ON YOUR V-TOUCH

To begin, there is an ON/OFF switch on the top of the player.

To turn on the unit, hold the ON/OFF switch to the right for 3 to several seconds, once it

has finished loading you will be brought to the main menu. The following instructions

will aid in performing all the various capabilities the V-Touch has to offer.

V - TOUCH Page | 2

CONNECTING FOR THE FIRST TIME TO COMPUTER

NOTE: Our media players, including the V-Touch, are not compatible with any software on the market for

synching media players with user’s media libraries.

Once you connect the V-Touch to your computer it should prompt you that the

removable storage device has been connected. If it prompts for a driver, allow it to

search automatically it should find the correct driver. After the V-Touch installs and the

computer detects it, there will be two drives that show up, one being the players

internal memory, the other the memory card slot (NOTE: Will show as empty if there is not

memory card inserted into the V-Touch)

. There will be labeled folders in the correct drive. They

will correspond with the files you may upload to them.

MUSIC

NOTE: Audio File Formats Supported: MP3, WMA

1. Plug your V-Touch to your computer via the provided USB cable.

2. Move the mouse cursor to the start button.

3. Click on My Computer

V - TOUCH Page | 3

4. Click on My Computer and double-click the removable disk icon.

5. To add music, Double-click the Audio folder

6. Copy and Paste your music files into this Audio folder (do not separate into

subfolders)

Creating FAVORITES, or a playlist

First you would have to create a "My Favorites" playlist, enter “My Favorites” from the

MUSIC menu, then select "Create New Favorite" this should take a few seconds and will

create an empty playlist for the songs to enter, once this has been created, go to MUSIC

and add the songs to your playlist by highlighting the song you wish to add and taping

the menu icon in the top right for each song you wish to add to a “My Favorites” list. If

you have more than one "My Favorites" list, select the one you wish to add the song to.

TO ADJUST VOLUME

1. While your music is playing

2. Press the speaker icon that is near the lower right hand side

(When you tap this icon, volume control will activate turning the "blue" tracking bar "orange")

V - TOUCH Page | 4

3. Then press <</>> or the -/+ to adjust volume to your desire.

TO UPDATE THE MUSIC LIBRARY

1. Tap gently the Music Icon.

2. Tap the last selection for “Update Library”

3. This should successfully update the files into the Music Library.

VIDEOS

NOTE: Any videos used without converting with supplied converter must be less than or

equal to the following specs: 320x240Resolution, AVI File with 25fps

To add videos:

Use directions 1-4 from MUSIC to begin then double-click the VIDEO folder from the

main directory. Here you can copy & paste AVI files, as well as removing videos you do

not wish to keep on your player.

V - TOUCH Page | 5

Video Conversion Software and Instructions

Can be found in the MP4Tools folder, which is located in the same directory as the AUDIO, VIDEO,

PICTURES folders. If not you may download a copy at

http://www.visual-land.com/downloads/MP4Tools.zip

(can be found on the V-Touch page under the support tab)

1. Run the installation for the MP4 Tool on the included application CD.

2. To begin, choose the video you wish to convert by selecting the File menu, then

Open Source.

3. Find the file that you wish to convert. Once it is opened go to the File menu

again to select the location where you wish to save the file and what you want to

name it.

4. If you do not do so it will automatically save the file in the same location and the

same name will be used.

5. Before converting you may also adjust different settings, such as video

resolution, volume adjustment, the frames per second, and other advanced

features, you may also at any time select default to bring back the original

settings if you have changed something and did not like the results.

V - TOUCH Page | 6

6. Once you have the settings to your preference, you may now use the Convert

button, which may take a few to several minutes, depending on the file size of

the original.

PICTURES

To add images, Double-click the IMAGE folder. Here you can copy & paste pictures. GIF,

JPEG, and BMP.

RADIO

To change between stations you would move left and right, either using the + or -

buttons to change stations or tapping right or left on the screen.

To change radio frequencies:

Tap the Icon on the top right corner for options, select Area Select, and choose the

appropriate area.

To save stations:

1. Once on the desired station you wish to save

2. Tap the options icon

V - TOUCH Page | 7

3. Select save Station Info

4. To move between saved stations use the M button to move to next saved station.

CALENDAR

To adjust calendar, please tap on the Calendar Icon.

To set the correct date highlight a date and press the M button at the bottom of the

player to successfully change the date.

To return back to main menu tap the << arrow at the bottom of the screen.

CLOCK

NOTE Clock adjustments will be made in 24 HOUR format, but will display as AM/PM.

To adjust the clock, tap on the Clock icon. And this will open the Clock settings.

Use the up and down arrow keys to select different numbers. The right arrow will jump

you over to the Month setting, and etc.

Once the setting has been changed correctly press the M button to successfully save the

settings change.

V - TOUCH Page | 8

CALIBRATE

Calibrate, only if the icons are not responding to tapping with the stylus pen or with

your fingers. Please follow these instructions. (NOTE: if the screen is not responding to

touch use the + and – buttons to highlight the CALIBRATE feature then the M button to

select it.)

1. With the stylus gently tap the center of the “+” as it appears.

2. A success will show up once this has been completed successfully. If not successfully

please make sure you are only tapping the center of the “+” sign.

WEBCAM

Webcam Driver and Software can be found in the WEBCAM folder, which is located in the same directory

as the AUDIO, VIDEO, PICTURES folders. If not you may also download a copy at:

http://www.visual-land.com/downloads/WebCam.zip

(can be found on the V-Touch page under the support tab)

1. On your player, select the PC Camera option. The player will prompt you to

connect the player to the computer via USB.

2. Connect the player to your computer via the USB cable. Once your computer

detects the player, it will prompt you for a driver.

V - TOUCH Page | 9

3. Choose to manually select a driver. Go to the folder where you unzipped the

above program and select it.

4. The computer will detect the drive and your player is now set up as a webcam

device for Skype, MSN Messenger, AIM, etc.

5. Now that the player is set up, you will not have to install the driver in the future.

Simply select the PC Camera option and connect to the computer via USB when

prompted and it will be ready to use.

TEXT

Text Files must be in *.txt format to be compatible with our unit, if they are not, you

may copy the body of text from the original file save it into a Text Document from your

computer and load the *.txt file to the EBOOK folder from the drive when connected to

your computer, the same location as the AUDIO, VIDEO, etc.

FILES

In the files section, all files will be displayed in their root directory. If a file is showing up

in this section and not in the section that you loaded it to, such as a song not loading in

V - TOUCH Page | 10

MUSIC but showing up in files, chances are it is not the correct format or it was not

loaded to the correct folder.

VOICE RECORD

To begin recording:

1. Enter Record, select begin recording

2. Either tap the STOP button or press the M button to begin recording.

3. Once you are finished press the RECORD ICON or M button again to conclude, it will

automatically save your recording.

CAMERA

NOTE: The camera function does not have a built in light, the lower the natural light in the room the

darker the image will seem.

To take a picture from CAMERA you will press the M button at the bottom of the player.

The pictures will be automatically saved. In the CAMERA feature, there is an icon that

for options, the same style as in MUSIC and VIDEO, taps this to enter the settings and

features menu.

V - TOUCH Page | 11

From here you can change such settings as:

Contrast, Brightness, Color Saturation, Capture Size, Photo Quality

From here you can also set up Time Capture:

1. Highlight and select TIME CAPTURE

2. Select the amount of time you wish to set from the time the M button is pressed till

the picture is taken.

3. Return to CAMERA

DV

With this feature you turn your player into a Camcorder. Videos will store on the

internal memory for viewing and sharing with friends and family.

To record a video:

1. Enter the DV icon from the MAIN MENU

2. The M button will be the START and STOP record button for this feature.

V - TOUCH Page | 12

3. Once you have stopped recording the videos will automatically save to the VIDEO

section where you may view them.

There is also an options icon in this feature; it is in the same spot as in the CAMERA

mode, from here you change the settings on:

Contrast

Brightness

Color Saturation

Capture Size

For further product documentation please visit our website at http://www.visual-land.com

V - TOUCH Page | 13

V-Touch Manual de Instrucción

Gracias por su compra del V-touch de Visual-Land. Antes de comenzar por favor revise

toda la informacion en este manual para uso apropiado del V-touch.

CARGANDO SU V-TOUCH

Hay dos modos de cargar su reproductor, por USB directamente relacionado con su

computadora. O usted también puede cargarlo uniendo el USB a la pared. La manera

más rápida sería por el cargador de la pared, ambos métodos pueden cargar con éxito.

NOTE: Todavia puede bajar archivos a su reproductor estando su reproductor

cargandose.

PRENDIENDO SU V-TOUCH

Para comenzar, hay un ON/OFF INTERRUPTOR ariba del reproductor.

V - TOUCH Page | 14

Para encender la unidad, sostenga el INTERRUPTOR a la derecha de 3 a varios segundos,

una vez que esto ha terminado de cargar le traerán al menú principal. Las instrucciones

siguientes ayudarán a realizar todas capacidades que el V-touch tiene que ofrecer.

LA UNION POR PRIMERA VEZ A LA COMPUTADORA

NOTE: Nuestros jugadores de medios, incluso el V-touch no es compatible con ningún software en el

mercado para jugadores de medios syncing con las bibliotecas de medios del usuario

Una vez que usted une el V-touch a su computadora esto debería apuntarle que el

dispositivo de almacenaje desprendible ha estado relacionado. Si esto apunta para un

driver, permita que ello busque automáticamente esto debería encontrar el driver

correcto. Después de que el V-touch instala y la computadora lo descubre, habrá dos

paseos que se revelan, un siendo los jugadores memoria interna, el otro la ranura de

tarjeta de memoria (NOTA: mostrará como vacío si no hay la tarjeta de memoria

insertada en el V-touch). Habrá carpetas etiquetadas en el paseo correcto. Ellos

corresponderán a los archivos que usted puede cargarles. Hay también una copia digital

del manual, así como el instrumento de convertidor para videos.

V - TOUCH Page | 15

MÚSICA:

NOTE: Formatos de Archivo de Audio Apoyados: MP3, WMA

1. Conecte su nuevo V-touch a su computadora vía el cable de USB

que vino con su Jugador.

2. Mover el cursor de ratón al buton de comenzar.

3. “Click” a Mi Computadora

4. “Click” en Mi Computadora y presiona dos veces el ratón el desprendible

icono de disco.

5. Para añadir la música, Presione dos veces el ratón la carpeta de Audio

6. Copiar y Pegar sus archivos de música en esta carpeta de Audio (sepárese realmente

en subcarpetas)

La creacion de FAVORITOS, o un playlist

Primero usted tendra que crear “Mis Favoritos” playlist”, entrar a “Mis Favoritos” del

menu de MUSICA, luego selecionnar “Crear un Nuevo Favorito” este debería tomar

unos segundos y creará playlist vacío para las canciones para entrar. Una vez que este

ha sido creado, vaya a la MÚSICA y añada las canciones a su playlist destacando la

V - TOUCH Page | 16

canción que usted desea añadir y grabar el icono de menú en la cumbre directamente

para cada canción que usted desea añadir a “Mis Favoritos” lista. Si usted tiene a más

de una "Mis Favoritos" lista, seleccione al qual usted desea añadir la canción.

AJUSTAR VOLUMEN

1. Mientras su música juega

2. Presionar el icono de altavoz que está cerca de la mano derecha, abajo

(Cuando usted da un toque a este icono, el control de volumen activará de “naranja" a

"azul")

3. Entonces apriete <</>> o el-/+ para ajustar el volumen a su deseo.

ACTUALIZAR LA BIBLIOTECA DE MÚSICA

Actualizar todos los archivos de Música:

1. Toque suavemente el Icono de Música.

2. Dar un toque a la última selección para "la Biblioteca de Actualización"

3. Este debería actualizar con éxito los archivos en la Biblioteca de Música.

V - TOUCH Page | 17

VIDEOS

NOTE: Cualquier videos usado sin convertirse con el convertidor suministrado debe ser menos que o igual a

las gafas siguientes: 320x240Resolution, Archivo de AVI con 25fps

Añadir videos:

Direcciones de uso 1-4 de la MÚSICA para comenzar entonces:

1. Presionar dos veces el ratón la carpeta de VÍDEO del directorio principal. Aquí usted

puede copiar y pegar archivos AVI, así como quitando videos usted no desean seguir su

jugador.

Software de Conversión de Vídeo e Instrucciones

Puede ser encontrado en la carpeta MP4Tools, que es localizada en el mismo directorio que el de AUDIO,

DE VÍDEO, carpetas de CUADROS. Si no usted puede descargar una copia en:

http://www.visual-land.com/downloads/MP4Tools.zip

(puede ser encontrado en la página de V-touch bajo la etiqueta de apoyo)

1. Dirigir la instalación para el Instrumento MP4 en el CD de aplicación incluido.

2. Para comenzar, elegir el vídeo usted desea convertirse seleccionando el menú de

Archivo, luego Abre.

V - TOUCH Page | 18

3. Encontrar el archivo que usted desea convertir. Una vez que es abierto van al menú

de Archivo otra vez para seleccionar la posición donde usted desea salvar el archivo y lo

que usted quiere llamarlo.

4. Si usted no hace así esto salvará automáticamente el archivo en la misma posición y el

mismo nombre será usado.

5. Antes de convertir usted también puede ajustar ajustes diferentes, como resolución

de vídeo, ajuste de volumen, los marcos por segundo, y otros rasgos avanzados, usted

también puede seleccionar en cualquier momento la falta para devolver los ajustes

originales si usted ha cambiado algo y no le gustaran los resultados.

6. Una vez que usted tiene los ajustes a su preferencia, usted puede usar ahora el botón

Convertir, que puede tomar unos cuantos a varios minutos, según el tamaño de archivo

del original.

FOTOS

Para añadir imágenes, Presione dos veces el ratón la carpeta de IMAGEN. Aquí usted

puede copiar y pegar fotos. GIF, JPEG, y BMP.

V - TOUCH Page | 19

RADIO

Para cambiarse entre estaciones usted se movería a la izquierda y derecha, utilización

los + o - botones para cambiar estaciones o golpeado a la izquierda o derecha en la

pantalla.

Cambiar radiofrecuencias:

1. Dar un toque al Icono en la esquina derecha para opciones, seleccione el Área

Escogida, y elija el área apropiada.

Salvar estaciones:

1. Una vez en la estación deseada usted desea ahorrar

2. Dar un toque al icono de opciones

3. Escogido salvan Información de Estación

4. Moverse entre estaciones salvadas usan el M botón para moverse a la siguiente

estación salvada.

CALENDARIO

Para ajustar el calendario, por favor dé un toque en el Icono de Calendario.

Page is loading ...

Visual Land V-TOUCH PRO User manual

This manual is also suitable for

Visual Land V-TOUCH PRO User manual

in other languages

Related papers

Other documents