2. Biamp
  3. Qt100 Software Upgrade

Biamp Qt100 Software Upgrade Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Biamp Qt100 Software Upgrade Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Qt100™ Software Upgrade Instructions
1. Upload Hex file (csmqt.com/support) to a new or empty
USB flash drive.
2. If Qt 100 is
p
lu
gg
ed in, un
p
lu
g
.
pgg pg
3. Place USB with Hex file into USB port of the Qt100.
4. Wait 10 seconds after connecting USB.
5. Plu
g
in the Qt 100.
g
6. Back light on LCD display will illuminate.
7. Rapid flashing will turn to a slow flash.
8.
Once flashing ends
"
Booting Please
Wait
"
will appear on
8.
Once
flashing
ends
Booting
Please
Wait
will
appear
on
LCD screen.
9. Display shows "Qt100 Main DSP Booting."
10
Display shows
"
Main
Loaded
"
10
.
Display
shows
Main
Loaded
.
11. "Version" and "Status" will appear.
12. If Status shows "OK" remove USB from port.
13
Qt 100 Software upgrade complete
13
.
Qt
100
Software
upgrade
complete
.
Cambridge Sound Management, LLC
csmqt.com | 800.219.8199
/