CVS VC58SMi User manual

VC58SMi

1.3 Megapixel IP Camera

Manual ver.0.2(2010.11.02)

VC58SMi USER MANUAL

-1-

Precautions

Please read the manual carefully before the installation in order to make use the

camera to be set up correctly and to have the best picture quality.

· Please keep the manual in good condition for your future reference and service

application.

· Installation and services should only be carried out by an authorized personnel

according to local safety regulations.

· If any liquid or solid matter gets into the housing, immediately disconnect the camera

from power supply and have it checked by your authorized dealer before reusing.

· Avoid installing the camera at extremely hot or cold places.

· If you are not a certified person, never try to dismantle the camera. To avoid electric

shock, never remove the screws or covers. There are no parts inside that need

maintenance by the user. All maintenance should be carried out by qualified

personnel.

· Avoid installing the camera at a place of high humidity.

· Avoid installing the camera at the place exposed to gas or oil.

· Keep the top glass of the lens always clean in order to obtain the best picture quality

all the time. Be careful not to be stained by fingerprint.

· Don't face the camera directly toward sunlight or sunlight reflecting area.

CMOS may go defective at this condition.

· Please give a special attention to keep the unit from dangerous drop or

external shock during the process of transportation or handling.

· Never try to touch the camera in wet hand. It may cause an electric shock.

· Do not expose the camera to radioactivity. It causes a serious damage on the CMOS.

Congratulations on your purchase of this product. Read this

manual carefully and keep it in a safe place for future reference.

VC58SMi USER MANUAL

-2-

Table of Contents

1. introduction .................................................................................................................

1. about installation manuals ..................................................................................... 3

2. features .............................................................................................................. 3

3. package contents................................................................................................. 4

4. product view ........................................................................................................ 5

5. system connect ................................................................................................... 7

2. installation ................................................................................................................ 9

1. connecting to a network(LAN) ................................................................................ 9

2. connecting audio ................................................................................................. 9

3. connecting sensor & alram .................................................................................... 9

4. connecting power ................................................................................................ 9

5. initial indicators .................................................................................................... 9

3. getting started ........................................................................................................... 9

1. remote image view ........................................................................................... 10

2. Live view ......................................................................................................... 11

3. Menu ...............................................................................................................17

4. CAMERA SETUP .............................................................................................. 20

5. EVENT SETUP ................................................................................................. 28

6. USER SETUP ................................................................................................... 32

7. NETWORK SETUP ............................................................................................ 35

8. SYSTEM SETUP ............................................................................................... 47

VC58SMi USER MANUAL

-3-

1. Synopsis

1. about this article

This manual explain how to use VC58Mi model that high quality network camera

Throughout this article, can be found that how to install VC58Mi, Set according to the environmental

changes, and how to Diagnostic error

2. features

Based on open IP standards, VC58Mi connect to any kind of IP network, including the Internet, and enable

remote viewing and recording from anywhere in the world. They also provide advanced video analytics

features, such as motion detection, audio detection and tampering alarm.

 video

- Multiple H.264 & MJPEG streams

- Multiple image resolution: CIF (320x240) ~ HD (1280x720)

- Support bit Rate: CBR, VBR

- Motion detection

- Support COMPOSITE Video out

 Audio

- Support Audio streaming Two-way

 Network

- Support static IP & IP(DHCP)

- Support multi connection

- Supported protocol : TCP/IP, UDP, DHCP, SMTP, HTTP, RTP, RTSP)

 Seriel Data

- Support RS-485

 Sensor & Alarm

- Support Sensor & Alarm terminal

VC58SMi USER MANUAL

-4-

- If system is failure it will be trigger alarm

 User interface

- Support remote setting, analysis, & update

-

 SD Memory

- SD memory Card recording , remote search & play

 High stability

- Based on imbedded system

- Watch-dog

3. package contents

VC58Mi Quick Guide S/W & installation CD

C-Mount Adaptor Auto Iris Plug 1EA

VC58SMi USER MANUAL

-5-

4. Product views

① Protective cover

② C-Mount lens adaptor

③ DC Iris Jack

④ Mounting bracket holder

Mounting bracket holder can be

separated and attached on the

bottom side as well.

Please use the supplied clamp

screws only change the position

of the bracket. Using screws more

than 5mm depth can do a serious

damage to the inside this camera.

VC58SMi USER MANUAL

-6-

 Rear

Connector

Function

1. LAN/802.3af

LAN port/802.3af

LED : indicate status of Power, network communication

2. AUDIO OUT

Audio output

3. AUDIO IN

Audio input

4. RESET Button

Factory Default

5. POWER IN

DC 12V

6. SENSOR/ALARM

Sensor input / relay out

7. COMPOSITE OUT

COMOSITE video out

8. SD CARD

SD memory card

①

②

③

④

⑤

⑥

⑦

⑧

VC58SMi USER MANUAL

-7-

2. INSTALLATION

1. CONNECTING NETWORK(LAN)

There is video output to check the video After connecting power & LAN connection

2. Connecting Audio

If necessary connect Audio

3. Connecting Sensor & alarm

Connect sensor and Alarm(relay).

4. Connecting Power

Connect the power adapter to the DC-IN socket on the camera

.

5. Initial indicators

It takes time about 1min. for initial

3. System operation

1. Remote view

If VC58Mi and center system are connected there are two way you can see.

The system's IP address must be set correctly

 Using an Internet Browser to Connect to the Camera

Read this section to learn how to use your Internet browser to connect to the IP camera, view images, and

hear audio output.

Default ID : admin Password : 1234

VC58SMi USER MANUAL

-8-

To connect to the IP camera using an Internet browser:

Enter the IP address of the camera in the browser address field.

.

☞ All items on the web page can be used after the authentication process

[Picture 1] LOGIN

○

1

ID / PASSWORD INPUT

 ID: MAX 16characters available English & Number

 PASSWORD: MAX 16characters available English & Number

 To manage register & delete of ID/PASSWORD go to Setup>User> User Account Menu

 If you do not have permission it will be show error message and can`t access

http://192.168.1.100

○

1

☞ [note]

- if you do not have the loading during over 30 minutes it will be logout

automatically

- The password is stored by the encryption algorithm

- If authentication fails, error message output on the bottom of the window

VC58SMi USER MANUAL

-9-

2. Live

[Picture 2] LIVE Monitoring

○

1

○

2

○

3

○

4

○

5

○

6

☞ [Main feature]

- Live monitoring

- fixed/original image size

- PTZ

- Screen Shot, Two-way Audio (Speaker/Mic)

- OSD On/Off

- Alarm Out

- UPNP(Universal Plug and Play) On/Off

- Network Status (LAN/WIFI)

- Storage

- help & support

VC58SMi USER MANUAL

-10-

○

1

Title Bar (common contents)

1 Display title massage as current page

2 Common contents menu

3 Indicate capital characters in english

○

2

Top right Menu bar (common contents)

[Emergency Call]

[logout]

[live view]

[Set-up]

 [Live view icon] –to monitor Live view

 [Set-up icon] – to Set up Menu

 [Log out icon] – to Log out

 If do Re -Login it connect last previous page

 [Emergency Call] – Emergency Event

 Send event massage to CMS/FTP/SMTP

 Available in all page

VC58SMi USER MANUAL

-11-

○

3

[PTZ control]

[ZOOM IN] [direction contorol] [ZOOM OUT]

[FOCUS NEAR] [FOCUS FAR]

[IRIS OPEN] [IRIS CLOSE]

[Choose PRESET]

[Goto PRESET ] [DEL PRESET ]

[Set PRESET ]

 [ZOOM IN] – PTZ ZOOM IN

 [ZOOM OUT] – PTZ ZOOM OUT

 [DIRECTION CONTROL] – PTZ DIRECTION CONTROL (상하좌우)

 [FOCUS NEAR] – PTZ FOCUS NEAR

 [FOCUS FAR] – PTZ FOCUS FAR

 [IRIS OPEN] – PTZ IRIS OPEN

 [IRIS CLOSE] – PTZ IRIS CLOSE

 [SELLECT PRESET] – CHOOSE NUMBER OF PRESET

 [GOTO PRESET] – GOTO PRESET

 [SETUP PRESET] – SETUP PRESET CURRENT

 [DEL PRESET] – DELATE PRESET

VC58SMi USER MANUAL

-12-

○

4

VIDEO & CONTROL

[SNAPSHOT] [SPEAKER] [MIC] [ALARM OUT]

[원본크기] [OSD] [UPNP] [HELP]

 [SNAPSHOT] – TO SNAP SHOT ON LIVE VIEW

 [SPEAKER] – AUDIO ON/OFF

 [MIC] – MIC ON/OFF

 [ALARM OUT] – ALARM OUT ON/OFF

 [IMAGE SIZE] – VIEW ORIGINAL SIZE (ZOOM IN/OUT according to Resolution)

 [OSD] –OSD ON/OFF

 [UPNP] – UPNP ON/OFF

 [HELP] – HELP & SUPPORT

VC58SMi USER MANUAL

-13-

○

5

Network and storage status

[LAN][WIRELESS][STORAGE]

 [LAN] – Display network status

 [WIRELESS] – Display wireless network status

 [STORAGE] – Display SD CARD status

☞ [note]- The camera includes support for UPnP™, which is enabled.

If also enabled on your computer, the camera will automatically be

detected and a new icon will be added to “My Network Places.”

- Click the icon for the device go to authentication of the web page,

☞ [note]

- Indicate As a step the sensitivity of wireless network status

- indicate SD card status

VC58SMi USER MANUAL

-14-

○

6

Live view

[Event view] [MIC] [SPEAKER]

 [event information] – Motion/Alarm Event Icon display

 [MIC] – DISPLAY MIC ON/OFF

 [SPEAKER] – DISPLAY SPEAKER ON/OFF

☞ [note]

- IF The brightness of the image is not stable, depending on the

background

Change option ATW->USER go to Setup> Camera> AutoWhiteBalance.

Factory Default is ATW.

- Double Click can be show full windows if you want to back press ESC

key.

VC58SMi USER MANUAL

-15-

3. SETUP

MENU

[Picture 3] SETUP PAGE

○

1

○

2

☞ [note]

- SETUP MENU is comprised of Menu select window & Menu setup window.

- First select group on the menu at the top and bottom of the group, Go to sub

menu page

- Except PTZ settings, after click SAVE / CHANGE button, then apply

.- Menu is comprised of 6 group Menu.

○

3

VC58SMi USER MANUAL

-16-

○

1

view live image

 It is possible to monitor during setup page

 It is not display during setup page with Image (ex: Motion/Camera)

○

2

select menu icon

☞ [note]

- Menu items are grouped into a total of 6

- Select the menu at the top left of the group first and then select the menu at

the bottom of the details

- To initialize page go to SYSTEM > System Information

- Recommended IE browser

VC58SMi USER MANUAL

-17-

 menu configuration

○

3

메뉴 설정

○

3

Menu settting

 Selected sub Menu setting

VC58SMi USER MANUAL

-18-

4. SETUP > CAMERA

Camera Setup

[Picture 4] camera setup

○

1

○

2

☞ [feature]

- Camera sub menu setup

- Privacy Mask (4Layer, Click & Drag)

- Day & Night

- Auto White Balance

- Auto Exposure

- Effect

- each setup menu can be edit with intuitionally & easily by using Slide bar

- setup menu is separated as group menu

VC58SMi USER MANUAL

-19-

○

1

Privacy Mask Setup

 Show – SELECT Mask ON/OFF

 Select – SELECT Mask Area

☞ [notes]

- 4zone Mask Area.

- each Mask area can be edit size & locate by click & drag left button in Mouse.

- All changed value will be applied after click SAVE button.

Page is loading ...

CVS VC58SMi User manual

CVS VC58SMi User manual

Other documents