Aiphone AX-DVF-XP User manual

Brand: Aiphone

Model: AX-DVF-XP

Category: Motorcycle Accessories

Type: User manual

This manual is also suitable for

AX-DV-XP

Aiphone AX-DVF-XP The Aiphone AX-DVF-XP is a vandal-resistant door station featuring a color video camera and a standalone proximity card reader with an embedded host controller. It is capable of storing up to 5,000 credentials (cards). Standalone operation means that the AX-DVF-XP can function independently without the need for an external host controller or PC, making it ideal for standalone access control applications.

The AX-DVF-XP is equipped with a high-quality color video camera that delivers clear and detailed images, enabling users to easily identify visitors. It is also equipped with a built-in microphone and speaker to facilitate two-way audio communication.

- INSTRUCTIONS -

The AX-DV-XP and AX-DVF-XP are color audio-video door stations for Aiphone’s AX-series, containing a standalone

proximity card reader with embedded host controller. Capable of storing up to 5,000 sets of credentials (cards) and

operating completely independent of an external host controller or PC, the AX-DV-XP and AX-DVF-XP are ideal for all

installations where reliable, inexpensive and easy-to-manage access control is desired.

Note: Programming of the AX-DV-XP and AX-DVF-XP requires Aiphone’s XP-KIT Programming Starter Kit for -XP

series standalone proximity card readers.

Door Station with Standalone Prox Reader

Pg. 1

NAMES & FEATURES

FEATURES:

Up to 5,000 credential storage (cards)

Standalone configuration without central ‘Host’

or personal computer

Night Lock function with contact output for

controlling after hours access and alarm

system mode

Forced Entry alarm output for triggering

external sounder or alarm system

Optional handheld Remote Programmer for

advanced functionality

NAMES & FUNCTIONS:

1. Camera 4. Speaker

2. Microphone 5. Call button

3. Name placard 6. Standalone Prox

Reader / Controller

AX-DVF-XP

AX-DV-XP

PACKAGE CONTENTS:

OPTIONAL ACCESSORIES:

SBX-DVF-P – Surface-mount stainless steel

backbox (AX-DVF-XP only)

XC5T/9 – Blank User Card (Qty. 1)

XRP3 – Handheld Remote Programmer

XP-KIT – Programming Starter Kit,

contains:

XRP3 – Qty (1)

XC5T/9 – Qty (10)

XMMC3/9 – Qty (1)

(Note: XP-KIT is required

for programming of

the AX-DV-XP / AX-DVF-XP!)

Mounting screw &

anchor bolt pack

(AX-DV-XP only)

AX-DV-XP or AX-DVF-XP

Vandal-resistant Door Station

Semi-flush backbox &

tamper-resistant bolts

(AX-DVF-XP only)

Blank name

placard

Security Driver

MOUNTING & INSTALLATION

Pg. 2

2'1"

20"

AX-DV-XP

AX-DVF-XP

3'1"

3'11"

AX-DV-XP

AX-DVF-XP

Installation Location:

Care should be taken when choosing the best

location for mounting the AX-DV-XP / AX-

DVF-XP. Do not install the video door station

in any areas subject to direct sunlight or other

strong direct lighting conditions; installation in

such locations may cause reduced visibility

and/or video quality while viewing from the

master station.

6'1"

Mounting Height & Viewing Angle:

Because the AX-DV-XP and AX-DVF-XP

contain a fixed-angle camera element,

mounting height and placement relative to the

entry should be taken into consideration. The

recommended mounting height and

corresponding viewing angle are shown, at

left.

8-3/4"

1/4"1-3/8"

Figure 1

8-7/16"

1-25/32"

4-1/2"

Figure 3

Figure 2

-XP Series Prox

Reader Pigtail

Physical Mounting Instructions:

1. AX-DV-XP – provide mounting box or wall opening

sufficient for both the CAT-5e cable (from the AX CEU)

and the -XP series card reader wire pigtail (Fig. 1),

noting the offset location of the reader pigtail (Fig. 2).

AX-DVF-XP – provide wall surface opening for rough-in

backbox (supplied), using dimensions shown (Fig. 3).

Note: if surface mount is required, use the Aiphone

SBX-DVLF- (sold separately) .

2. Open the protective door and

connect the CAT-5e cable (RJ45)

from the AX CEU to the AX-DV-XP

or AX-DVF-XP station, carefully

routing the wire in one of the two

possible directions, as shown (Fig.

2). Be careful to avoid damaging the

wire jacket when securing the

protective door.

3. AX-DV-XP – Secure the door station to

the wall surface using the provided

mounting screws and/or anchors, as

shown (Fig. 1). Secure the vandal

resistant chassis using the security driver

(provided).

AX-DVF-XP – Secure the door station to

the backbox using the included security

screws / driver (Fig. 3).

(See Note 2)

(See Note 3)

(See Note 1)

WIRING

Pg. 3

12V DC

Power Supply

Red

Black

White: Not Used

Yellow: Not Used

Pink: Not Used

Blue: Not Used

Brown (Ground)

Strike

DC Power

Violet (Lock)

Night Lock

Trigger Out

(See Note 4)

Forced Entry

Trigger Out

Red / Blue

Grey / Pink

Request-Exit

(Egress) Input

(See Note 4)

Forced Entry

Sensor Input

Green

Grey

NOTES:

1. The ‘Lock’ output (Violet wire) is a normally-open solid-state contact rated at 30VDC / 1A. Only DC-powered locks

can be connected directly to the reader. Locks requiring AC power, higher contact rating, or Normally-Closed

functionality should use an external 12VDC relay (Aiphone RY-18L or equivalent). Release duration is determined

by the reader’s programming configuration (see the -XP Series Programming & Operation Manual).

2. The ‘Request-Exit’ input is used when triggering the reader’s internal contact output from an external contact source

is desired (motion detector, egress button, intercom relay output, etc.). An input closure should be connected

across the Green wire and Ground (Brown wire). Unlock events triggered by this input are also subject to the

reader’s release duration (see the -XP Series Programming & Operation Manual).

3. When the Night Lock mode is active, a trigger will be provided across the ‘Night Lock Trigger Output’ (Red / Blue

wire) and Ground (Brown wire). This can be used to integrate with external alarm systems for improved

functionality.

4. The ‘Forced Entry Sensor Input’ (Grey wire) is designed to be connected to Ground (brown wire) in series with a

magnetic door sensor (or equivalent normally-closed device) to allow the system to determine when the door has

been either forced, or left open after an unlock event. When this sensor input active, an output trigger will be

provided across the ‘Forced Entry Trigger Out’ (Grey / Pink wire) and Ground (Brown wire), for connection to an

alarm system event input, sounder, or other desired device.

5. All device outputs (with the exception of the Violet ‘Lock’ output) provide a low current trigger output, and should not

be used to drive anything greater than another device’s trigger input without an appropriate relay. All device inputs

require only a contact closure across the respective wire and Ground (Brown wire).

6. The White, Yellow, Pink, and Blue wires are not used and should be trimmed to avoid possible shorting and system

malfunction.

Note: Only information pertaining to the wiring of the -XP series card reader is shown in this manual. For programming

information, consult the -XP Series Programming & Operation Manual (included in the XP-KIT Programming Starter

Kit). For AX series intercom configuration / connection information, consult the AX series Installation and

Operation Manual (included with the AX CEU).

PROGRAMMING:

See programming instructions included with the required XP-KIT Programming Starter Kit (sold separately).

Note: Do not attempt to program or use the AX-DV-XP / AX-DVF-XP door station without first reading

the initialization instructions included with the XP-KIT Programming Starter Kit!

CARD READER:

Power Source: 12V DC

Current Requirements: 40mA (Avg)

Terminations: Color-coded pre-wired pigtail

Operating Temperature: -10°~60°C / 14°~140°F

Operating Humidity: 0-95% relative humidity

non-condensing

SPECIFICATIONS:

DOOR STATION:

Power Source: AX-series CEU

Camera unit: CCD Camera

Scanning line: 525 lines

Min. illumination: 5 Lux at 1' or less

Terminations: RJ-45

Operating Temperature: -10°~60°C / 14°~140°F

Wiring Distance: 980ft w/ CAT-5e wire

Aiphone Communication Systems

1700 130th Ave. N.E.

Bellevue, WA 98005

(425) 455-0510

FAX (425) 455-0071

Pg. 4

AX-DV(F)-XP Instr.

0608TB

FCC WARNING:

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference that may cause undesired operation.

For proper regulatory compliance, the drain wire should be disconnected at the

power supply end of the cable.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

The Reader is intended to be powered from a limited power source output of a

previously certified power supply.

TOLL FREE TECHNICAL SUPPORT:

(800) 692-0200

E-MAIL: [email protected]

SPECIFICATIONS

AX-DV-XP

DIMENSIONS:

AX-DVF-XP

Aiphone AX-DVF-XP User manual

Brand: Aiphone

Model: AX-DVF-XP

Category: Motorcycle Accessories

Type: User manual

This manual is also suitable for

AX-DV-XP

Download PDF

report

Aiphone AX-DVF-XP User manual

This manual is also suitable for

Aiphone AX-DVF-XP User manual

Related papers

Other documents