2. Beta
  3. 1464TDI

Beta 1464TDI Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Beta 1464TDI Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3
TDI PUMP PRESSURE MEASUREMENT
To measure turbo pressure, follow these steps.
• Remove the test port screw which is located on the pump, marked with an arrow
in next picture.
• Place the testing hose as shown in the next picture and connect the 80 bar sensor.
• Start the engine and check the pressure.
• Check car manufacturer manual to get the test details, pump working pressure,
engine rpm. etc., because these may change depending on the engine model.
ISTRUZIONI PER L’USO
I
INSTRUCTIONS FOR USE
EN
12
BETA UTENSILI S.p.A.
via Alessandro Volta, 18 - 20845 Sovico (MB) ITALY
Tel. +39 039.2077.1 - Fax +39 039.2010742
www.beta-tools.com
/