Page is loading ...
Contents
English.....................................................01-03
Deutsch
Français
Españo
....................................................04-06
...................................................07-09
.....................................................10-12
Italiano.....................................................13-15
日本語.......................................................16-18
Weight 860g
Length 330mm
Max effective working stroke 7mm
The largest multiple of arm of force 38
Technical description
Length：330mm/13"
Parts of Hand nut riveter:
01
Hand nut riveter
English
Accessories: One multi-function wrench and
rivets of M5,M6,M8,M10,10-24,1/4-20,5/16-18.
The rivets apply for United States and Canada.
（one multi-function wrench and rivets of
M3,M4, M5, M6, M8, M10, M12. The rivets apply
for Germany, The United Kingdom, France,
Spain, Italy and Japan.）
Open the handle will fit riveting
nut on the rivet pole.
After putting in place the rivet nut
riveting, turning the knob clockwise
direction as shown in figure, namely
the unloadrivet nut.
After packed nut insert rivet hole
and close the handle nut riveting
in position.
Insert the riveter into hole ofter
putting the nut in the stem.
Working steps
02
English
Replacing steps
Use a matched wrench to loose nut nose
piece and dismantle it.
When pushing the sheath at end, as shown
in the picture, to rotate the screw of riveter
outward and remove it.
Fixed slide set
Rivet nuts stem
The sleeve short of slot
When pushing the sheath at end,as shown
in the picture,to rotate the needed screw
of riveter inward.
Tighten the rivet nuts stem and
release the sheath as shown
in the picture
Push the sheath back and separate the
sexangular of screw from sheath,
as shown in the figure
03
Riveting nut graph:
English
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
