2. Langham
  3. F25259

Langham F25259, F25261 Operating instructions

  • Hello! I've reviewed the user manual for the Langham Products Grip-On Bed/Chair Raiser models K100, K200, and K300. This document details the assembly, usage, and safety instructions for these raisers. It also provides information on compatible leg sizes, height adjustments, and weight capacity. I'm ready to assist with any questions you might have regarding these products.
  • What leg sizes are compatible with K100 model?
    What leg sizes are compatible with K200 model?
    What leg sizes are compatible with K300 model?
    How do I know if the raiser is the correct size?
    How do I lock the raiser in place?
    Can the height be adjusted?
TRENT LANE
CASTLE DONINGTON
DERBY DE74 2NP
ENGLAND
TEL: (01332) 850277
INT: + 44 1332 850277
FAX: (01332) 850366
INT: + 44 1332 850366
Grip-On Bed/Chair Raiser
K100, K200 & K300
1. Grip-On Bed/Chair Raisers are supplied fully assembled.
Minimum & maximum leg sizes accepted -
K100 - 19 to 38 mm
K200 - 32 to 50 mm
K300 - 43 to 65 mm
2. Grip-On raisers will fit castors and legs of many different shapes, the Grip-On must support its own
weight to be working correctly. If the Grip-On falls straight off it is too large for the leg or castor.
3. Press down on bed or chair being raised to lock Grip-On in place.
4. If required set height adjustment by removing one or both base sections from each raiser. (height must
be equal for all legs) Before use, test for stability.
5. Grip-On Raisers are designed for use in static mode only. As with all devices designed to assist the
elderly or disabled, care should be taken to avoid sudden or undue movement, when using this
equipment.
Maximum operating load
500-kg per set of four raisers (including weight of chair/bed)
K100/0401
/