2. American Standard
  3. 3690.001.020

American Standard 3690.001.020, 3690001.020, SELECTRONIC 6065.161 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard 3690.001.020 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
M77
© 2011 AS America Inc. Rev.11/11
PRIOLO® FloWise® 15" HEIGHT
ELONGATED FLUSHOMETER TOILET
VITREOUS CHINA with EVERCLEAN®
PRIOLO FloWise® 15" HEIGHT
ELONGATED TOILET with EVERCLEAN®
• Floormountrearoutletushometervalvetoilet
• Vitreouschina
• HighEfficiency,LowConsumption.Operatesin
 therangeof1.1gpfto1.6gpf(4.2Lpfto6.0Lpf)
• MeetsdenitionofHET(HighEfficiencyToilet)
 whenusedwithahighefficiencyushvalve
 (1.28gpfor1.6/1.1gpfdualush)
• PermanentEverClean® surfaceinhibitsthegrowth
ofstain-andodor-causingbacteria,mold,and
mildewonthesurface
• 15"rimheight
• Condensationchannel
• Elongatedbowl
• Powerfuldirect-fedsiphonjetaction
• Fullyglazed2-1/8"trapway
• 1-1/2"inletspud
• 2boltcaps
• 100%factoryushtested
❏ 3690.001Elongatedbowlonly,topspud
❏ 3691.001Elongatedbowlonly,topspudwith
 slottedrimforbedpanholding(Whiteonly)
System MaP* Score:
• 1,000gramsofmiso@1.6gpfor1.28gpfwhen
usedwithanAmericanStandardushvalve
* MaximumPerformance(MaP)testingperformedbyIAPMO
R&TLab.MaPReportconductedbyVeritecConsulting,Inc.
andKoellerandCompany.
Component Parts:
❏ 047007-0070AInletspud(furnishedwithbowl)
❏ 481310-XXX0ABoltcapswithretainers
 (furnishedwithbowl)
Nominal Dimensions:
752x356x381mm
(29-5/8"x14"x15")
Recommendedworkingpressure–between
25psiatvalvewhenushingand80psistatic
Fixtureonly,lessseatandushometervalve
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
SEEREVERSEFORROUGHING-INDIMENSIONS
To Be Specied:
❏Color:❏White❏Bone❏Linen
❏ Seat:
❏AmericanStandard#5901.110Heavydutyopen
 frontlesscoverwithEverClean®surface
❏AmericanStandard#5905.110Extraheavyduty
 openfrontlesscoverwithEverClean®surface
❏ AlternativeSeat:
❏ FlushometerValve:
❏ 1.6gpf:
❏ Sensor-Operated:AmericanStandardSelectronic®
  DCPower#6065.161.002(TopSpud)
❏ Manual:AmericanStandard#6047.161.002
  (TopSpud)
❏ 1.28gpf:
❏ Sensor-Operated:AmericanStandardSelectronic®
DCPower#6065.121.002(TopSpud)
❏ Manual:AmericanStandard#6047.121.002
  (TopSpud)
❏ 1.6/1/1gpfDualFlush:
❏ Sensor-Operated:AmericanStandardSelectronic®
  DCPower#6065.761.002(TopSpud)
M78
© 2011 AS America Inc.
PRIOLO® FloWise® 15" HEIGHT
ELONGATED FLUSHOMETER TOILET
VITREOUS CHINA with EVERCLEAN®
NOTES:
PRODUCT3690SHOWN,3691SAMEASEXCEPTWITHSLOTTEDRIMFOR
BEDPANHOLDING.
TOCOMPLYWITHAREACODEGOVERNINGTHEHEIGHTOFVACUUM
BREAKERONTHEFLUSHOMETERVALVE,THEPLUMBERMUST
VERIFYDIMENSIONSSHOWNFORSUPPLYROUGHING.
FLUSHOMETERVALVENOTINCLUDEDWITHFIXTUREANDMUSTBE
ORDEREDSEPARATELY.FLUSHOMETERVALVEREQUIREMENTSFOR
12"(305MM)ROUGH-IN:SWEATEXTENSIONNIPPLEISREQUIRED.
REFERTOVALVEMANUFACTURERANDLOCALCODES.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithin
therangeoftolerancesestablishedbyANSIStandardA112.19.2.These
measurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
3690.001/3691.001
Rev.11/11
673mm
(26-1/2")
121mm
(4-3/4")
240mm
(9-1/2")
152mm
(6")
102mm
(4")
381mm
(15")
470mm
(18-1/2) 356mm
(14")
13mm
(1/2")
345mm
(13-5/8")
646mm
(25-3/8")
60mm
(2-3/8")
136mm
(5-3/8")
752mm
(29-5/8")
C/L OF SEAT POST HOLES
140mm (5-1/2") CENTERS
FINISHED WALL
1" N.P.T. OR 1" C.W.T. SUPPLY
TO FLUSH VALVE
(SUGGESTED)
C/L OF 1/2”
DIA. HOLES
1-1/2"
SPUD
FINISHED
FLOOR
13mm x 25mm
slots
(1/2" x 1")
217mm
(8-1/2")
102mm
(4")
C/L OF
WASTE
OUTLET
DIMENSIONS (Nominal) NOTE: Distance from floor to closet
flange centerline (rough-in) must be 4" (102 mm) with flange
surface flush to 1/16" (1.6mm) max. beyond finished wall.
/